기본 정보
Laser Type
Fp-Ld(Others Specify on Requests)
Output Power(dBm)
-7(Can Be Adjustable, Others Specify)
Outline Size(mm)
200 X90 X50
제품 설명
1. Product Introduction
This is our new-type light source. It provides single to quad-wavelength output including 650nm visible light source and 850/1300nm wavelength for multi-mode fiber or 1310/1550nm dual-wavelength for single mode fiber. Together with new-type power meter , they combine the accurate test solution for the optical fiber networks.
2.Specifications
Model | ALK2001B |
Operating wavelength(nm) | 1310/1550 (others specify on requests, Max wavelength is 5) |
Applicable fiber | SM ,MM |
Laser type | FP-LD(others specify on requests) |
Output Power(dBm) | -7(can be adjustable, others specify) |
Stability(dB,15min,20ºC) | ±0.1 |
Stability(dB,30min,20ºC) | ±0.05 |
Modulation(Hz) | CW, 270, 1K,2K |
Fiber Port | FC/PC or FC,SC,ST interchangeable |
Alkaline Battery | 3XAA,1.5V |
Battery Operating time(h) | 45 |
Operation Temperature(ºC) | -10~+60 |
Storage Temperature(ºC) | -25~+70 |
Outline size(mm) | 200 X90 X50 |
Weight(g) | 285 |
3.Notes:
1. Wavelength Range: Specified standard operating wavelength range in which the Power Meter can work properly under certain technical specifications.
2. Power Measurement Range: The maximum and minimum range in which the Power Meter can work properly.
3. Uncertainty: Difference between two measurement results that were tested by Power Meter and another Standard Power Meter respectively.
4. Standard packages
1. Handheld Light Source...................1
2. Manual............................1
3. Protective Holster........................1
4. 1.5V AA Battery...........................3
5. Cotton Swabs..........................1
5 . Maintenance
If the Handheld Light Source is not used for a long time, the light output port must be protected with the dustproof hat.
When the Handheld Light Source is used for a period of time, the output port maybe polluted. It results in the output power decreasing. So the connector must be cleaned with alcohol cotton. If it couldn't be cleaned, please send it to the manufacturer.
Once not using for a long time, please take out the battery.
Don't take apart the Handheld Light Source please. If there are any other troubles, please contact with the manufacturer.
DO NOT look into Handheld Light Source adapters directly when light source is on, laser output does harm to your eyes.
6.Troubleshooting
Description | Problem | Method |
Faint LCD display \No display after turning on the unit | Battery is weak/Others | Turn on the unit again/Change battery |
Insensitive display in LCD | Light interface is polluted/ broken/Display locked | Check connector carefully and clean sensor's interface |
7.Change Battery
8.1 If you find battery is weak while operating it, please immediately turn the unit off and change a new battery.
8. Warranties and Service
Caution: Repair it in the field is NOT recommended.
Warranty for Handheld Light Source
Our Company. warrants that Light Source will be free from defects in material and workmanship for a period of 18 months. This warranty covers the original user only and is not transferable. Should the device fail at any time during this warranty period,Our will, at its sole discretion, replace, repair or refund the purchase price of the product.
This warranty is limited to defects in workmanship and materials and does not cover damage from accident, acts of God, neglect, contamination, misuse or abnormal conditions of operation or handling.
To establish original ownership and provide date of purchase, please complete and return the registration card to Our Company. This warranty will not go into effect until we have received the warranty registration.
A warranty registration card is included with the original shipment of equipment. Please take a few moments to fill out the card and mail or fax it to us to ensure proper initiation of your warranty term.
To return a defective product for warranty coverage, contact us for a written authorization. Failure to properly protect the product during shipping may avoid this warranty.
We will pay the return transportation fee for products repaired or replace in warranty. Before making an repair not covered the warranty, We will estimate cost and obtain authorization, then invoice for repair and return transportation. We reserves the right to charge for all testing and shipping costs incurred, if test results determine that the device is without defect.
주소:
16th Floor, Creativity Center, Jinnan District, Tianjin300352, China
사업 유형:
제조사/공장
사업 범위:
가전제품, 서비스, 전기전자, 측정 기계
경영시스템 인증:
ISO 9001, ISO 14001
회사소개:
Tianjin Eloik Communication Equipment Technology Co., Ltd는 독일 기술을 보유한 CE 인증 회사로 중국 내 광 통신 장비의 연구, 개발, 생산 및 판매를 전문으로 합니다. 주요 제품은 광 섬유 융합 플리커, OTDR, 광전원 측정기, 광광원, VFL 등입니다.
이 회사는 오랜 세월 동안 광전자 통합 개발 경험을 쌓은 독일 전문가로 구성된 강력한 R&D 팀을 보유하고 있습니다. 또한 엄격한 고급 생산 관리 기술과 ISO9001 품질 보증 시스템을 갖추고 있으며 완벽한 판매 후 추적 서비스 시스템을 제공합니다. 우리는 항상 "제품"의 개선을 유지하고, "서비스"를 통해 고객 편의를 위한 관리 개념을 만들고, 우리 팀의 모든 힘을 가지고 국내외의 광학 통신 분야에 더 나은 제품을 만듭니다.
Tianjin Eloik Communications Equipment Technology Co., Ltd는 중국 통신업체 3개사인 China Unicom, China Telecom 및 China Mobiles의 공급업체 목록에 있습니다.
엘릭은 사용자에게 더 나은 제품과 더 만족스러운 서비스를 제공하기 위해 항상 노력할 것입니다.
CE 인증서와 ISO 인증서를 획득했으며, Fusion 접속 구성 회사의 스페인, 영국, 미국, 호주, 인도네시아, 인도, 러시아 등