기본 정보
용법
전화, 컴퓨터, 워크 스테이션, 서버, 휴대 전화, 휴대용 퍼스널 컴퓨터, Industrial Communication
인증
CE, ISO, RoHS 준수, FCC Classb Weee
Transfer Rate(Phy)
200Mbps
운송 패키지
Inner Box and Paper Carto
제품 설명
Brief introduction: BPL Smart Powerline Ethernet Bridge is an industrial powerline communication product developed by WonderTek. The product adopts the ITU-T G.9960 G.hn communication protocol standard, at present has been widely used in intelligent manufacturing, intelligent building, intelligent city street light monitoring, smart meters, solar panels and communications in dangerous environment, Marine applications, automotive applications, aerospace applications, railway, mining, intelligent storage, intelligent sorting, automatic garage cable or sliding contact line, and many other field.
An intelligent power grid needs reliable data communication. With state-of-the-art broadband powerline (BPL) technology, the power grid becomes an omnipresent data network for smart metering and smart grid applications. A headend device in the local network station is the starting point for setting up a broadband powerline cluster. It manages the communication between intelligent measurement systems as well as installed measuring and switching devices in the low-voltage grid and the IT backend of the network operator. All intelligent measuring systems can be connected to the Wide Area Network (WAN) via the BPL network. In addition, the G.hn-BPL technology with its very short response times is ideal for network applications and switching operations. Compared to other BPL technologies, G.hn ensures a much more stable PLC network. The devolo multi-phase coupling uses two channels for data communication. This makes the connection between the BPL devices much more robust and more performant.
1.1 Highlight 1.1.1 Technical parameters Support G.hn Industrial DIN rail style installation. Up to 6 levels of relay can be achieved Self-adapt the rate.l 1.1.2 Manageability Support Remote Firmware update(TR069). 802.3D Ethernet Bridge. 802.1Q VLAN. Quality of Service(QoS) . IGMO(IPv4)Snooping&MLD(IPv6)Snooping. 1.1.3 Operating environment Working temperature: -40ºC-85ºC. Operating humidity: 10%-85% no condense. Storage humidity:5%-90% no condense.l |
1.1.4 Design standards ITU-T G.9960 IEC 60529 IEC 50022 IEC 60068-2-6 |
Specification:
Interface | 1*LAN 10/100Base-TX self adaption RJ45 port,MDI/MDX support |
LED display lights | PWR(power light), PLC(PLC signal light), ETH(Ethernet light) |
Transfer band | 2-50MHz and MIMO |
protocol(PHY) | ITU-T G.9960 (G.hn) IEEE802.3,IEEE802.3x, IEEE802.3u |
Security | 128-AES |
Transfer rate(PHY) | 200Mbps |
Number of each group | 60 |
Modulation | OFDM |
Maximum effective data transfer rate | TCP/IP 100Mbps |
Manageability | Remote Firmware update,support TR-069(optional) |
802.1D Ethernet Bridge |
802.1Q VLAN |
Quality of Service(QoS) |
Operating temperature | -40ºC-85ºC |
Size | 120*90*45mm(L×W×H) |
Weight | About 0.30kg |
Operating environment | working temperature:-10ºC-85ºC working humidity 5%-90% non-condensed state |
Certification | FCC,CE class B,WEEE,RoHS |
Relay number | Maximum level 10 relay |
Transmission distance | About 5000m |
Transmission line | Three-wire transmission MIMO Mode |
1.2 Features
(1) Packet loss:≤0.1%(100M,load 70%);
(2) Support 7*24 hours all weather operation;
(3) Hardware watch dog function;
(4) PING<20MS.
1.3 Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;
Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 s.
According to B/T 17626.2-2006.
1.4 Immunity of electrical fast transient impulse group(Common mode)
The testing voltage which the device should be beared:
Between the power supply voltage port and ground: ±2.0kV;
Between signal circuit and ground: ±1.0kV;
Repetition frequency: 5KHz;
Test duration: 1 min/ time;
Testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.
1.5 Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV;
The interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)
1.6Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.
1.7 System topology
1.8 Installation diagram
1.9 Product model selection
Model | Ethernet Port | Line Environment | Voltage |
WD-1001M-BPL-AM | 1 | AC Master | AC85-520V |
WD-1001M-BPL-AS | 1 | AC Slave | AC85-520V |
WD-1001M-BPL-DM | 1 | DC Master | DC10-80V |
WD-1001M-BPL-DS | 1 | DC Salve | DC10-80V |
주소:
No. 369, Kangzhuang Road, Zhoushi Town, Kunshan, China
사업 유형:
제조사/공장
사업 범위:
가전제품, 공업 설비와 부품, 자동차와 오토바이와 액세서리, 전기전자
경영시스템 인증:
ISO 9001
회사소개:
Kunshan WonderTek Technology Co., Ltd.는 PLC(Power Line Communication) 네트워크 제품에 특화된 세계 최고의 개발자 및 제조업체 중 하나입니다. 산업용 Wi-Fi 및 산업용 스위치 당사는 PLC의 기술적 장점, 통합된 환경 보호 및 에너지 절약 등과 같은 소유 기능을 통해 경쟁력 있는 가격과 첨단 하이테크 제품으로 인기 있는 제품을 만들기 위해 노력하고 있습니다. 당사의 비즈니스 철학은 삶을 보다 흥미롭고 편리하게 만드는 것입니다.
WonderTek은 PLC 기술 및 심도 있는 R&D 팀의 많은 전문가를 보유하고 있습니다. 전 세계 고객에게 OEM/ODM 서비스를 제공할 수 있습니다. 자체 개발한 전력선 통신(PLC) 제품: 1200m 및 1500M 전력선 어댑터, 2000M 축음선 이더넷 브리지, 2000M 동축 케이블 이더넷 브래킷 및 PoE가 있는 802.11ac Wi-Fi 메시 1000M 산업용 스위치, 안정적인 성능을 갖춘 IP 카메라, 고급 기술, FCC 인증 통과.
WonderTek은 사용자가 저렴한 비용으로 네트워크 시스템을 설정할 수 있는 최고의 네트워크 솔루션을 제공합니다. 콘센트를 찾을 수 있는 곳이라면 어디서든 네트워크에 연결할 수 있습니다. 우리 제품은 가정, 회사, 지능형 전력망 관리, 통신 운영, 보안 시스템, 건물, 공항, 자동차 산업, 이트로어틱스 시스템, 벌크 자재 처리 및 채광