Lab Computerized Universal Tensile Compression Testing Machine

• 커스터마이징: 사용 가능
• 판매 후 서비스: 평생 부품 지원 가능
• 보증: 1년
• 모델 번호.: UTM-200EW 200kN
• 공작물의 최대 직경: 550mm
• 공작물의 질량 범위: 20,000kg
• 유형: 범용 테스트 기계
• MAXCAPACITY: 200kn
• 정확도 등급: 0.5
• 로드 웨이: 전자 부하
• 로드 방법: 정적 부하
• 디스플레이: 디지털
• 제어: 컴퓨터 제어
• 무게: 142kg
• 전원 소스: AC220V
• 모델: Utm-200ew
• 최대 부하: 200kN (20000kgf, 20 Tons)
• 적재 정확도 클래스: 클래스 1 (선택 사항: 클래스 0.5, 정확도 ±0.5%)
• 부하 해상도: 1/500000 전체 크기 ((전체에 대한 하나의 해상도만)
• 테스트 제어 모드: 3 폐쇄 루프 제어 (응력, 변형 및 변위)
• 최대 인장 시험 공간: 550mm
• 최대 압축 시험 공간: 550mm
• 테스트 너비: 600mm
• 변위 측정 정확도: ±1%
• 변위 측정 분해능: 0.001mm
• 변형 측정 정확도: ±1%
• Displacement Control Speed Range: 0.001-180mm/Min
• 변위 제어 속도 정확도: 속도가 <0.01 mm/min일 때, ±1.0% 이내에
• Stress and Strain Control Rate Adjustmen: 0.001-5%Fs/S
• 작업 환경: No Vibration, No Dust; Room Temperature 10 ℃ ~ 35
• 운송 패키지: 합판 상자
• 규격: 1045*650*2300mm
• 등록상표: EBP
• 원산지: Zhejiang, China
• 세관코드: 9024102000
• 생산 능력: 매월 90세트

제품 설명

Computer Controlled Electronic Tensile Testing Machine                                     
                                                                                                                                         UTM-200EW 200kN (20 tons)

Introduction
UTM-200EW series electromechanical testing machines offer force, displacement or deformation closed loop testing in tension, compression, flexure, shear, tear and peel etc. The machine can be equipped with a variety of accessories including: grips, fixtures, compression frames, thermal cabinets and extensometers covering all relevant applications as testing of rubber, plastics, foils, films, textiles, adhesives, paper, foods, foams, timber, wires or other metallic or non-metallic specimens and medical, electronic and other components. The load frames are rigid constructed, providing superior axial and lateral stiffness.

Mechanical Features

1.Load Frame:

The frames all incorporate human factor considerations in the design to ensure safety, reduce operator fatigue, and provide the highest level of flexibility. Extremely robust crosshead guidance is incorporated in all frame designs providing the highest level of lateral crosshead stiffness.

2.High accuracy: The preloaded precision ball-screw with high speed & low noise ensures high speed and position measurement accuracy and less noise.

3. High stiffness frame: The load frame is with 4 columns and heavy duty pre-loaded bearings. Preloaded ball screws, precision guidance columns, and a symmetrical drive system improve frame stiffness and alignment
4. Safety features: The testing machine stops automatically when the change in the test force exceeds a specified value during operations.
5. Over-Travel Limits
Dual over-travel limits, located on the front console, help prevent crosshead overshooting and sensor overloads. A graduated rule along the column can be used to preset these limits.                                                                                                                       

 

Specifications

Model	UTM-200EW
Max Load	200kN (20000kgf, 20 tons)
Load Accuracy Class	Class 1 (optional: Class 0.5, Accuracy ±0.5%)
Force Testing Range	2%~100%F.S (optional 0.5 class: 0.4%~100%F.S)
Load Resolution	1/500000 Full Scale ((only one resolution for full scale, not graded))
Test Control Mode	3 closed loop control (stress, strain and Displacement)
Max. Tensile Testing Space	550mm
Max. Compression Testing Space	550mm
Test Width	600mm
Displacement Measurement Accuracy	±1%
Displacement measurement resolution	0.001mm
Deformation Measurement Accuracy	±1%
Resolution of deformation measurement	0.001mm
Displacement control speed range	0.001~180mm/min
Displacement control rate accuracy	When the rate is <0.01 mm/min, within ±1.0% of the set value; When the rate is ≥0.01 mm/min, within ±0.2% of the set value.
Stress and strain control rate adjustment range	0.001~5%FS/S
Stress and strain control rate adjustment accuracy	Within ±2% of setting value for rate <0.05%FS; When the rate ≥0.05%FS, it is within ±0.5% of the set value.
Main Machine body size	1045*650*2300mm
Weight	1420kg
Power	2.5KW
Power Supply	Single-phase 220V±10%, 50-60Hz
Working Environment	No vibration, no dust; room temperature 10 ºC ~ 35 ºC; humidity ≤ 90%; No vibration around, no corrosive medium, no strong magnetic field interference.
NOTE: 1. Extra wide and/or extra height frames are available. 2. Power supply system is completely customizable.

Standard Accessories

No.	Name	Part Name	QTY.
1.Machine Host
1.1	Host Frame	200kN, 6 column ( 4 stand rod and 2 ball screw frame structure) Double space (up tensile,down compression, select different vice and fixture can achieve different functions)	1 set
1.2	AC Servo Control System	Power: 2KW Optional: Panasonic Motor - Japan	1 set
1.3	Ball Screw	Taiwan, ABBA	1 set
1.4	Synchronous Pulley	Japan BANDO	1 set
1.5	Synchro Belt	Japan BANDO	1 set
2.Testing Machine Control System
2.1	200kN Precision Load Cell	Calibration can be carried out as per ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221 standards.	1 set
2.2	Control System	Force, displacement and deformation closed loop control	1 set
2.3	English Operation Software	Language supports: English (Other optional), built-in over 200 test standards	1 set
2.4	Digital Handheld Unit Controller	320 x 240 LED display: Can display Load, displacement, speed. Can control test start, test stop, test zero clearing and so on	1 set
2.5	Computer	HP	1 set
2.6	Printer	HP	1 set
3.Testing grips (Selected according to testing sample)
3.1	Manual Wedge Tensile Grip (pneumatic type or hydraulic type as optional)	Used for metal and non metal Material; Adopt inclined self-locking and rotating handle clamping	1 set
	Flat Jaw	Flat specimen Thick: 0-7mm; Optional: 7-14mm, 14-20mm	1 set
	Round Jaw	Round specimen standard: Φ4-Φ9mm Optional: Φ9-Φ14mm	1 set
3.2	Compression Test Grip	Φ100mm	1 set

4.Optional Accessories
4.1	3-point Bending Fixture	Used to materials 3-point bending test.	1 set
4.2	Electronic Extensometer	Gauge length50mm; Deformation:10mm according to customer requirement	1 set
4.3	Long travel extensometer	Suitable for longitudinal deformation measurement in routine tensile test to non-metallic materials, such as rubber, water-proof materials, cloth, rope and soft plastics. Deformation:800mm, gauge length:20mm	1set
4.4	USA Epsilon Extensometer	3542 Series	1 set
4.5	90 degree peeling Grip	Do peeling / stripping test	1 set
4.6	Safety shield	Fully enclosed aluminum alloy protective cover Organic glass and aluminum	1 set

Software system:
Test process:
Selection a test--Enter the test scheme selection--Input the sample information--Start to test-end of the test     
Features:
1. Full digital control
The whole measuring and control system adopts the special controller, which can achieve the digital adjustment of zero point and gain of load, deformation and displacement, and it's easy to operate and possesses the high reliability.
2.Possess the functions of storage, setting and loading for various kinds of parameters, which make it convenient to connect multiple transducers with one load frame.
3.Realize the close-loop control, and show the reference curve during the executive operator adjusting the close-loop parameters, so the user can observe the close-loop effect caused by the parameters.
4.Perfect graphic function to complete the functions of the reappearance, amplification, reduction, self-adaptation, lapping of the curves, display and print the curve at the appointed range, observe the coordinate of the test point.
5.Data processing supports automatic analysis and graphic man-machine mutual processing, which is convenient to check and compare the test results.
Multilevel identity management Multilevel identity management, different identity has different functions, which not only makes the operation quick by ordinary operator, but also protect the system effectively.

6.Multi controlling channels: Displacement, force control,deformation,control,stress control, strain control, constant stress, constant strain etc.
7.Test standard: provide users with the necessary applications to the test, covering GB, ASTM, DIN, JIS, BS ... and other testing standard specification.
8.Multi measurement units
Load can be displayed in kN, lbf or kgf as selected by the operator.

Test Report 
Output and print report: Excel, word, template test report, can be edited customize To show test information, including test person,test standard,test curve,test max load etccan add your company LOGO and company name, easy to edit.

Company Profile

 

 

    EBP's mission is to be recognized as the global professional leader & best partner in the materials preparation and analysis industry, providing our users with innovative & robust full lab-solutions, reliable service, support & access to the knowledge that comes from our team serving the industry for 10+ years. We have 8 senior engineers who working in hardness tester and material testing industries over 10 years. We are skilled in provide complete solutions to our customers. And our professional sales & after-sales team can help our partners develop market more easier!

Main products

 

 

   EBPu Electromechanical Equipment (Zhejiang) Co., Ltd. is one of the professional companies in market, we are committed to becoming the most satisfied supplier to our partners & clients! Our products range: Sample preparation machine, Hardness tester, Metallographic Microscope, Non-destructive Testing Instruments (NDT), Universal testing machine, Impact testing machine and related consumable materials.

Certifications

 

 

Application cases

 

 

Our customer

 

 

FAQ