기본 정보
Panel Dimension:
4000 x1200 mm
Foam Density:
52± 2 kg/m3
Aluminium Thickness:
200/80 micron
Thermal Conductivity
0.021 W/(m. C)
Compressive Strength:
200 N/mm2
Pressure in duct max:
2, 000 Pa
제품 설명
It is developed specially for the air distribution in HVAC applications. Polyisocyanurate (PIR) foam panel with 52 ± 2 Kg/m3 density, 20 mm thickness, coated with 200 micron aluminium galvanized color steel plate on one side and 80-micron thick aluminium foil on the other. The aluminium foil is with a layer of corrosion-resistant polyester paint. The Gum Skin waterproof coating and the 200 micron thickness of the external aluminium coating, gives an extraordinary rigidity and mechanical resistance against accidental damages which makes panels suitable for outdoor installations.
PUR and PIR all belong to the same generic family of thermosetting materials. The general spec. Of PIR and PUR is very close but our PIR is Green products because we use high standard blowing agent 245FA which bring our products had Zero ODP, which means free ozone depletion potential, is a standard to the circumstance friendly.
We got the certificate for our PIR Panel in Australia; It is approved by third party in Australia as per AS/NZS 1530.3-1999 the methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability, flame propagation, heat release and smoke release, and ASNZS 4859.1 the methods for thermal conductivity. We are manufacturing based on it.
Advantages
Thermal insulation: Constant and continuous in all duct sections. Special closed-cell insulation guarantees low thermal conductivity and limit the risk of condensation.
Friction loss: The low number of flanges and limited surface roughness keep linear friction losses at very low levels.
Airtight seal: Air tightness of TD pre-insulated ducts is eight times more than conventional ducts.
Energy saving: Perfect thermal insulation, low friction loss and optimum airtight seal allow for maximum exploitation of air handling unit capacity, increasing efficiency and reducing operating costs.
Hygiene and air quality: The use of aluminium for the internal surfaces of the ducts ensures hygiene and cleanliness. The problem of ageing of the insulation and consequent release of particles is non-existent.
The use of aluminium with glue and anti bacterial coating which give an additional protection and harmless; No moulds, viruses and bacteria grow on its surface.
Safety: TD pre-insulated ducts have a low participation in fire, do not drop and smokes have a reduced opacity and toxicity. Our product is in conformity with the requirements of the most restrictive international regulations.
Silent operations: The sandwich structure (aluminium - insulating material - aluminium) guarantees a good acoustic behavior. Vibration and reverberation are stopped by the insulating material, contributing to a higher comfort in the environment where TD pre-insulated duct is installed.
Light weight: The very light weight allows a reduction of weight on the structures, supporting points, workmanship costs and materials necessary for the installation.
Construction easiness: Possibility of manufacturing ducts in the work shop or directly at job site with considerable advantages on transport costs.
Maintenance and modification easiness: TD pre-insulated ducts can be maintained and modified in any section on site.
Duration: The outer aluminium coating coupled with the insulating material provides sturdiness, rigidity and good resistance to corrosion, erosion and deformation even in special applications.
주소:
Room 1902, No. 1018 Xikang Rd., Shanghai, China
사업 유형:
제조사/공장, 무역 회사
사업 범위:
건축과 장식재료, 서비스
회사소개:
1996년 인도네시아에서 사전 절연 알루미늄 덕트 시스템을 도입하여 배포하기 시작한 이후, 첫 번째 목표는 기존 판금, 그 이후로 우리는 우리의 목표를 달성하기 위해 우리 자신의 브랜드가 필요해있다는 점을 발전시키고 성장했으며, 그래서 우리의 국기를 위한 TD를 만들었습니다.
에어 프로덕츠의 PT. Kasei Tata UDara는 전 세계 알루미늄 패널 시장에 합류하기 위해 2004년에 설립되었습니다. 인도네시아에서 처음으로 그 이후로 선호되어왔습니다.
저희 공장은 인도네시아 탕게랑에 위치해 있으며 자카르타 국제 공항과 매우 가깝습니다. 3명의 전문가와 8명의 숙련된 작업자가 사용하는 2개의 자동 패널 생산 라인을 갖춘 3.000 평방 미터의 넓은 공간에 있습니다. 당사의 패널 및 부속품 생산 설비에는
TD 패널의 자동 생산 라인 2개, 플라스틱 압출 테스트 실험실의 생산 라인 1개가 포함되어 있습니다. 당사는 품질을 제어하기 위해 자체 실험실에서 난연성, 열 전도율, 압축 강도 및 점도를 테스트할 수 있습니다.
전산 원료 관리 시스템: 재료 투입구 정확성을 보장하여 항상 한 가지 기준에 따라 폼을 유지할 수 있습니다.
창고: 1.800 평방 미터. 보통 6000m2 규모의 패널 재고를 보유하고 있어 긴급 주문 문의가 가능합니다.
우리 공장은 매월 최대 250.000 평방 미터를 생산할 수 있으며, 이는 약 75x40HQ 컨테이너입니다. 현재 인도네시아 국내시장의 경우 90%가 차지하며 2006년부터 지금까지 세계 32개국 이상의 패널을 수출했습니다. 현재 저희는 중국 상하이에 글로벌 유통업체를 보유하고 있으며, 호주 뉴사우스웨일즈, 말레이시아 셀랑고르, 이란 테헤란, 스리랑카 등에 ACMA의 3개 세계 유통업체가 있습니다. 각 유통업체는 자체 국가에서 유통할 수 있는 창고와 네트워크를 보유하고 있습니다. 인도네시아의 MKRI, 말레이시아의 KIARA 스퀘어 쇼핑몰, 이란의 아자디 경기장 등 많은 대형 프로젝트들이 TD 사전 단열 덕트를 사용하고 있습니다