LED 관

Pse, C-Tick 25W 1500mm T8
30cm 60cm 90cm 120cm 150cm 180cm 240cm available
22W 25W 33W 37W 40W available
PSE, C-TICK 25W 1500mm T8 LED tube
Certifications: CE RoHS FCC PSE C-tick SGS approval
High quality LED driver designed and produced by our factory!
Three years warranty
Epistar/CREE LED chip
Lifespan: 5000hours
Application: Hotel, office, home, shop, market, exhibition hall, conference room, school and the other indoor commercial lighting.
Specification:
Power: 25W
Unit Size: 1512*26mm
LED quantity: 432PCS
Luminous efficiency: >85 LM/W
Input voltage: AC85-277V
Output voltage: 57V0.144A
Luminous flux: 2376LM
Working frequency: 50-60Hz
Ambient temperature: -20-50
Ambient humidity: More than 65%
Color rendering index: 70-84Ra
Power factor: ≥ 0.95
Equal to conventional fluorescent: 60W+
Material: Aluminium alloy cooling fin +PC cover
WW: Warm white (2700-3500K), for mood lighting
PW: Daylight white (4500-5500K), ideal for offices, shops
CW: Cold white (6000-7000K), ideal for working warehouses, basements, garages
Features:
1. Good heat dissipation: Using high thermal conductivity aluminum alloy as the main heat dissipation, good heat dissipation performance.
2. Easy replacement: Replace the traditional tube light directly.
3. LED sources: Applied with the highest-level LED, low brightness, attenuation and lifespan is over 50000hrs
4. Optional multi-input voltage: Wide-voltage design AC input voltage, adapt to different voltage range.
5. Environmental protection: No any harmful radiate spectrums such as UV or infrared ray included
Attentions:
Please use and install according to the instructions.
Do not hit or press with heavy substance
Please handle and transport gently.
Do not twist the light when power is on.
The warm light tube is normal when the power is on
Do not touch the lamp when power is on.
Installation:
Standard installation: Connect directly to AC power, this is th most saving enrgy mode
Replacing installation:
If there is a startr on the old fluorescent light fixture, remove the starter. Remove electronic ballast
If there is no starter on the fluorescent light fixture, remove the electronic ballast.
How to choose LED lights:
First, to ensure that the product voltage for your country voltage, choose the specifications you want to purchase and operating temperature, the above project to ensure that products can basically apply select the light color, this is to adapt to customer habits.
About the quality of LED products:
First, selecting the LED chip, because LED lighting is made of LED chips, the lighting illumination depends on chip, we adopt using Epistar chip, use SMD 3528 the chip has the advantage of good quality and high brightness, (other brands of chips according to customers requirementsa) and then look at the brightness of product parameters, such as luminous, illuminance. Do not think that bigger is better. The most suitable is best for you, too brigtht to makes you comfortable.
LED chip number, the quantity of LED are relations to the power consumption and brightness.
In addition to the above thing affect the quality of LED lights, the most important thing is the LED assembly, life have a relationship with the mold design, the cooling capacity of products is relay on model design!