기본 정보
Rolling Body
Roller Bearings
The Number of Rows
Multi-column
Spherical
Non-Aligning Bearings
Load Direction
Radial Bearing
제품 설명
Backstopping Clutches These clutches allow conversion of a reciprocating motion into intermittent rotational movement. In backstopping (or holdback) applications, one race is always fixed to a stationary ground member. The function of the clutch is to permit rotation of the mechanism connected to the other race, in one direction only, and to prevent any rotation in the reverse direction at all times. Although the clutch normally overruns most of the time, it is referred to as a holdback or backstop in conveyors, gear reducers and similar equipment because its function is to prevent reverse rotation. |
HSB Series
HSB units are intended for use as backstops on the high speed shaft or intermediate shaft of reducers and as holdbacks on the headshaft of conveyors. They use standard FSO Series clutches with the addition of an oil reservoir made from an aluminum casting with cooling fins. HSB models are designed to permit free oil flow between clutch and reservoir to provide increased cooling capacity and increase backstop life.
FHB Series
The FHB backstop is mounted on a through-shaft with its inner race driven by a key, and its integral outer race torque arm prevented from rotating through a clearance fit interface with a fixed reaction pin. The reaction pin may also be used to provide axial restraint of the backstop on the rotating shaft. Typical uses for the Model FHB backstop include inclined conveyors, bucket elevators, and other applications where a rotating shaft must be absolutely prevented from rotating in a reverse direction, as commonly found in mining, aggregates, material handling, and other industries. The high speed capability of the unit make this backstop ideal for mounting on double extended input shafts of gear reducers. The overrunning speed of the rotating shaft should be greater than 400 RPM to assure C/T Sprag "lift-off".
LLH Series
Formsprag Long Life Holdbacks (LLH) are designed for use on conveyor headshafts, bucket elevators, pumps, or any other machinery where reverse rotation must be positively prevented. LLH holdback clutches are ready to install. They are equipped with a one-piece, quickly detachable torque arm and grease labyrinth protected oil seals that positively prevent airborne contaminants from reaching internal seals and parts. Oil lubricated, the clutch assembly also includes an oil sight gauge with filter breather for ease in checking lubricant level.
SBI Series
SBI Series In-line Mounting Ball Bearing Supported clutches are comprised of an HPI clutch with an extended shaft (inner race) for in-line mounting. The extended shaft provides a convenient way to mount a coupling to accommodate the misalignment in the in-line application. This design is intended for applications with medium to heavy-duty indexing requirements. They are oil lubricated and equipped with lip type seals. Grease is available. Increased overrunning speeds are possible with clutches having steel labyrinth grease seals.
SB Series
SB Series In-line Mounting Ball Bearing Supported clutches are comprised of an FSO clutch with an extended shaft (inner race) for in-line mounting. The extended shaft provides a convenient way to mount a coupling to accommodate the misalignment in the in-line application. This design is intended for applications with light to medium indexing requirements. They are oil lubricated and equipped with lip type seals. Grease is available. Increased overrunning speeds are possible with clutches having steel labyrinth grease seals.
RL Series
Available in six sizes, the Formsprag RL Clutch is a sprag type no-back which permits transmission of driving torque from input to output shaft in both directions of rotation, but restrains any feedback torque of the driven load from rotating the output shaft in either direction. The RL Clutch is extremely simple in design and has a minimum number of moving parts. The outer race diameter is the same size as standard bearing dimensions, thus simplifying mounting and providing maximum strength in the assembly.
HPO Series
The HPO series is especially designed for high speed outer race overrunning appliations, such as high speed dual drives or standby drives. HPO clutches are grease lubricated and equipped with labyrinth seals. Formchrome® sprags and special retainers are incorporated for maximum service life and speed capability. These clutches mount on a through shaft, with the inner race driven by a key. The ground O.D. of the outer race is designed as the mounting surface for attaching parts and is concentric with the bore. Tapped holes are provided in each end of the outer race for securing parts to the clutch.
FS-100, 200, 300 Series
Generally used as an indexing clutch where a compact package is desired. A snap-ring bearing must be inserted before installing. An adequate seal or cover must be provided at the open end to retain lubricant. Shaft end must be turned down and threaded to accommodate bearing and lock nut.
Part No. | Dimension (mm) | G | Mass |
FSO | HPI | B | D | C | D1 | E | S | n-m | numbers | (kg) |
FSO 300 | HPI 300 | 60.45 | 76.2/76.15 | 63.5 | 28.58 | 66.67 | - | 1.58×45° | 4 | 1.6 |
FSO 400 | HPI 400 | 68.26 | 88.9/88.85 | 69.85 | 30.15 | 73.02 | - | 1.58×45° | 4 | 2.7 |
FSO 500 | HPI 500 | 85.72 | 107.95/107.9 | 88.9 | 44.45 | 92.07 | - | 1.58×45° | 4 | 4.8 |
FSO 600 | HPI 600 | 92.07 | 136.53/136.47 | 95.25 | 63.50/69.09 | 120.65 | - | 1.58×45° | 6 | 8.6 |
FSO 700 | HPI 700 | 123.8 | 180.97/180.92 | 127 | 90.42/101.6 | 158.75 | - | 1.58×45° | 8 | 19 |
FSO 750 | HPI 750 | 149.2 | 222.25/222.2 | 152.4 | 107.95 | 177.8 | 31.75 | 1.58×45° | 8 | 38 |
FSO 800 | HPI 800 | 149.2 | 254/253.95 | 152.4 | 139.7 | 227.01 | 31.75 | 1.58×45° | 8 | 46 |
FSO 900 | HPI 900 | 158.8 | 304.8/304.72 | 161.9 | 161.92 | 247.65 | 34.92 | 1.58×45° | 10 | 71 |
FSO 1027 | HPI 1027 | 165.1 | 381/380.92 | 168.3 | 228.6 | 298.45 | 34.92 | 3.17×45° | 12 | 113 |
MOUNTING EXAMPLE
Description
Types FSO 300 to 700 are sprag type freewheels self contained, sealed and bearing supported, using two ball bearings. Units are delivered oil lubricated according to the type.
It is a Formsprag USA design with a "full sprag complement" that gives a very high torque for a given diameter.
Any overload is resisted by a sprag to sprag abutment, avoiding a sprag tilt over.
Type FSO is oil lubricated and uses standard shaft lip seals.
Type | Size | | Overrunning speeds | | Lubricant | Weight | Torque Drag |
FSO FSO-GR HPI | | | FSO | FSO-GR | dH7-bxh | d4) | A | B | C | E | F | G | z | J | K | L | f | FSO | FSO..GR | HPI | | TR |
| TKN1) | nmax2) | nmax3) | | min-max | | -0.05 | | | | | | | | | | | | | | |
[Nm] | [min-1] | [min-1] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | | | [mm] | | [mm] | [ml] | [ml] | [ml] | [kg] | [Ncm] |
300 | 379 | 3000/900 | 3600/900 | 15-5x5 | 12... 19 | 63.5 | 76.2 | 60.45 | 1.6 | 28.58 | 66.67 | 4 | M8 | 13 | M6 | 0.8 | 7 | 10 | 14 | 1.6 | 18 |
400 | 407 | 2800/850 | 3600/850 | 18-6x6 | 12... 22 | 69.85 | 88.9 | 68.07 | 1.6 | 30 | 73 | 4 | M8 | 13 | M6 | 0.8 | 10 | 20 | 20 | 2.7 | 27 |
500 | 1621 | 2500/800 | 3000/800 | 30-8x7 | 19... 33 | 88.9 | 107.95 | 85.73 | 1.6 | 45 | 92 | 4 | M8 | 16 | M6 | 1.5 | 22 | 35 | 35 | 4.8 | 31 |
| | | | 40-12x8 | | | | | | | | | | | | | | | | | |
600 | 3105 | 2200/750 | 2400/750 | 45-14x9 | 24... 57 | 95.25 | 136.525 | 92.2 | 1.6 | 63.5 | 120.6 | 6 | M8 | 16 | M6 | 1.6 | 52 | 84 | 84 | 8.6 | 62 |
| | | | 50-14x6 | | | | | | | | | | | | | | | | | |
| | | | 50-14x9 | | | | | | | | | | | | | | | | | |
700 | 6900 | 1600/450 | 2000/450 | 60-18x11 | 48... 82 | 127 | 180.975 | 123.85 | 1.6 | 90 | 158.75 | 8* | M10* | 20 | M6 | 1.6 | 168 | 280 | 280 | 19 | 156 |
| | | | 65-18x11 | | | | | | | | | | | | | | | | | |
| | | | 70-20x12 | | | | | | 101,65) | | | | | | | | | | | |
Applications of one way clutch bearing:
Air cleaning plants; Gear Reducers , Conventional and Nuclear Power Plants,Agricultural machines; Automotive Industry, Clay Pigeon Traps , High Voltage Switchgear, Buchet elevators; Compressors; Conveyors; Cranes and hoists; Dry cleaning machinery; Duplicator equipment; Fish net machines; Heat-treatment furnaces; Induced draft fans; Multi-states conveyors; Packaging machinery; Printing machinery; Pumps; Punch presses and feeders; Power plants; Refinery equipment; Speed reducers; Standby power units; Textile looms; Two-speed grinders; Two-speed shiftovers; Washing machines; Wire winding machinery. Rolling Mills, Roller Coaster, Fitness Machines, Industrial Fans, Vertical Pumps
Gear Reducers
Here one-way clutches are used as integral backstops in drive systems for conveyors, industrial fans, pumps, crushers, mixers, kilns and turbines. One-way clutches are also widely used as overrunning clutches in auxiliary or pony drives and dual-drive systems.we offers solutions for long life and maintenance free operation.
Printing Machines
The classic application in printing machines is the inking roller auxiliary drive. But one-way clutches have also been used extensively as indexing devices, to provide an inexpensive and reliable means of achieving a mechanical variable speed drive for the inking roller main drive.
We know-how results in inexpensive, customised solutions even for the most demanding applications.
Conventional and Nuclear Power Plants
R&B backstops are used extensively on pumps used in the primary and secondary cooling systems of power generating equipment. R&B is certified to KT 1401 as an authorised supplier for the nuclear power industry.
Textile Machines
There is a wide range of applications for R&B clutches in textile machinery, especially in circular knitting machines, thread preparation, bobbin winding and looms. In applications using sprag clutches the special Formchrome finish used in our ball bearing series of one-way clutches offers an exceptionally long life in overrunning applications.
Automotive Industry
There is a wide range of applications in the automotive manufacturing sector. Overrunning clutches on conveyor systems and engine test bed starter mechanisms, exhaust fan backstops in spray painting booths. The multiplicity of designs offered by R&B offers the designer the best opportunity to achieve the perfect "fit".
Clay Pigeon Traps
In this common application a one-way clutch is used as a backstop to prevent the arm of the trap "bouncing" back after a launch. The rugged R&B roller-ramp design provides a reliable solution for this demanding but price sensitive application.
High Voltage Switchgear
Here a one-way clutch is used as a backstop to secure the actuating spring pre-load position. The quality and reliability of the chosen R&B product ensures instantaneous applied torque and a firm "latch".
Agricultural Machinery
On seed drills a series of one-way clutches is used as an indexing mechanism to provide an infinitely variable speed drive. One-way clutches are also used for overrunning on round bale presses and as backstops for bulk conveyors and silo extractors. R&B ball bearing series sprag clutches and self-contained designs offer simple and effective solutions for many applications in this industry.
Car Washing Gantries
To avoid damage to vehicles in the event of a drive system failure car washes use overrunning clutches in the horizontal roller drive. R&B ball bearing series and self-contained roller-ramp designs can be very easily incorporated into chain sprockets, timing belt pulleys and other drive elements.
Rolling Mills
In the steel, and other metals industry one-way clutches are used as overrunning drives in roller conveyors. The speed of the conveyed material can momentarily be accelerated without any effect on the main drive.
Fitness Machines
R&B ball bearing clutches have proved dependable and durable in the flywheel assembly of superior quality rowing and stepper machines and novel drive systems in bicycles and manually operated wheelchairs.
Davits (Winches)
R&B one-way clutches are used in combination with brakes to ensure the safe lowering and raising of rescue vessels on ships and off-shore platforms. New industry wide standards are satisfied by R&B design and manufacturing quality.
Bow Thruster
R&B one-way clutches are used as backstops to prevent reverse rotation of the thruster's propeller when not in operation. Units with centrifugally disengaging sprags offer a solution that can be easily incorporated into the drive gearbox and, under drive conditions, operate contact free to ensure a very long operating life.
Industrial Fans
One-way clutches are frequently used in multiple fan installations to prevent non driven fans from "windmilling" in the reverse direction.
Vertical Pumps
Large vertical pumps used in power generating plant cooling systems and for flood control frequently employ a backstop. Larger versions of the R&B high speed backstop are ideal for these applications and may be mounted on the top of the pump or the electric motor.
주소:
Changhong West Road 182, Wujin District, Changzhou, Jiangsu, China
사업 유형:
제조사/공장
사업 범위:
공업 설비와 부품, 야금광산물과 에너지, 자동차와 오토바이와 액세서리, 제조 가공 기계, 철물
경영시스템 인증:
ISO 9001
회사소개:
Changzhou Lisongtai Industrial Motion Technology Co., Ltd는 원웨이 클러치, 오버러닝 클러치, 니들 롤러 베어링과 같은 다양한 원웨이 베어링을 생산하는 데 특화된 제조업체입니다. 1,000가지 이상의 미터법 및 인치 시리즈 니들 베어링 지정을 한 방향으로 착각하는 2000개 이상의 표준 모델은 국내외 시장에서 오토바이, 전기 및 공기 구동식 공구, 프린터, 경공업, 기계, 건설기계, 자동차 트럭, 사무실 장비에 정기적으로 제조되고 널리 사용됩니다. 또한, 다양한 작업에 대한 고객의 요구 사항에 따라 특수 베어링도 제공됩니다. 우리는 한국, 이란, 터키, 불가리아, 루마니아, 러시아, 이탈리아, 노르웨이, 미국, 캐나다, 우리는
무엇입니까?
우리 공장은 경제개발 해안 도시-산업지구-우진 창저우 시(Jiangsu)에 있었습니다. 교통이 편리해서, 기차를 타고 상하이까지 1시간 정도 걸립니다.
주요 제품은 무엇입니까?
원웨이 베어링, 원웨이 클러치, 오버러닝 클러치, 백스톱, 캠 클러치, 니들 롤러 베어링, 지지 롤러 및 커브 베어링, 원통형 롤러 베어링 매트가 있는 스러스트 볼 베어링 우리는 많은 주식을 보유하고 있으며 비표준 제품, 고객의 도면 또는 샘플을 생산할 수 있는 주의 대상이 됩니다.
우리의 장점은 무엇입니까?
제품: 1999년, 엔지니어로서 우리의 상사는 큰 베어링 공장에서 일하면서 원웨이 클러치 베어링을 개발 및 설계하기 시작했습니다. 지금까지 BB 시리즈, MZ 시리즈, TFS 시리즈, NSS 시리즈 RSBW 시리즈 개발에 성공했는데, 이는 Janpan의 TSUBAKI 브랜드와 비교했을 때 높은 품질로 도달했음을 확인할 수 있습니다.
Stieber 클러치, GMN 클러치, Ringspann 클러치, Formsprag 클러치, NSK 클러치와 동등한 Quliaty ECT
GFR 시리즈, DC 시리즈, ASNU 시리즈, NFR 시리즈, GFK 시리즈, NF 시리즈, AE 시리즈, AA 시리즈 등, 고품질 도달 거리를 확인할 수 있는 것은 독일의 STIEBER 브랜드와 비교할 수 있습니다.
FE 시리즈, FP 시리즈, FND 시리즈, FKN 시리즈 원웨이 클러치 베어링은 독일 GMN 브랜드와 비교했을 때 높은 품질 수준에 도달했음을 확인할 수 있습니다.
고객에게 업계 최고의 서비스를 지속적으로 제공하기 위해 베어링 공급 및 설계의 최전선에 서서 새로운 베어링으로 개발을 계속하고자 하는 우리의 의도는 바로 이 때문입니다.
공장 장비: 이 회사는 가장 진보된 CNC 자동 생산 라인, 자동 조립 라인 및 다양한 테스트 장비를 보유하고 있습니다. 저희가 제조한 베어링은 모두 저소음, 저진동, 저마찰, 고정밀, 높은 밀봉, 높은 회전 속도 및 긴 수명
Quantity Control: 2011 ISO9001:2008 품질 관리 시스템 인증을 획득했고, 모든 제품은 여러 번 검사하기 전에 발송됩니다. 또한 필요한 경우 상세 도면과 서비스를 제공합니다.
응용 프로그램이 무엇입니까?
기계, 리듀서, 호이스트, 엘리베이터, 자동차, 가전제품, 직물기계, 인쇄기계, 식품기계, 광산 기계 등
우리 제품이 판매된 곳은?
전 세계 우리의 제품은
독일, 영국, 네덜란드, 스페인, 이탈리아,
인도, 인도네시아, 필리핀, 태국,
이란,
멕시코의 두바이,
미국의
"품질 및 서비스"는 우리가 실제로 실천한 당신의 주요 관심사가 되어야 합니다. 우리의 제품 카테고리를 찾아보고 귀하의 문의사항을 알려주십시오. 우리의 목표는 고객에게 양질의 서비스를 제공하고 경쟁력 있는 가격을 제공하는 것입니다. 적절한 공급, 큰 재고, 편리한 교통편을 갖춘 우리는 새로운 고객이 우리를 방문해서 따뜻하게 환영한다.