기본 정보
Product
Used Oil Residue Oil Sludge Recycling Machine
Raw Material
Waste Engine Oil, Oil Residue, Sludge Oil
Final Product
Diesel Oil,Light Oil
Oil Rate
80% Diesel Oil, 5% Light Oil, 10% Heavy Fuel Oil,
Material of Reactor
Q245r Boiler Plate
Thickness of Reactor
16mm
Mode of Cooling
Circulating Water Cooling
Heating Material
Coal,Wood, Oil,Natural Gas
제품 설명
Vacuum Distillation Waste Car Oil Recycling To Diesel Machine
Product Description
Waste oil distillation plant distills the incoming crude oil, waste oil or lubrication oil into useful products such as diesel oil and fuel oils, gasoline or petrol, jet fuel, etc, the oil yield will be 85%-90%, the by-products are 10%-15% slag and syngas.
The raw material for waste oil recycling machine
1) crude oil of waste plastics, waste rubber refining
2) waste oil such as: waste diesel engine oil, waste oil, waste slag, etc
3) waste crude oil
4) waste wash a oil
The final product after distillation
No. | End Production | Yield | Usage |
1 | Diesel | 73% | Used for diesel engine |
2 | Gasoline | 12% | Used for gasoline engine |
3 | Residue Oil | 9% | * Feeding into Pyrolysis Machine for second Pyrolysis * Sold directly for building road |
4 | Non-Condensible Gas | 3% | Recycle as Heating fuel after treated by Gas-treatment System |
5 | Other | 3% | * Water and impurity 2% * Loss 1% |
Working Process of Waste Oil Distillation Machine
1. Heat the heat conduction oil with the heat conduction oil furnace;
2. The heat conducting oil flows into the coil in the distillation reactor and heats the waste engine oil in the distillation reactor;
3. When the waste engine oil is heated to a certain temperature, the reactor is directly heated with fuel. As the temperature increases, the waste engine oil produces oil and flows into the buffer tank. The odorous light components in the waste engine oil can be distilled and collected into the distillation tank.
4. The oil gas from the buffer tank enters the catalytic tower. In the catalytic tower the macromolecular oil gas are broken down into smaller molecules .
5. Oil gas of small molecules enter the cooling system through the catalytic tower and are cooled into liquid oil;
6. After the oil gas steam out, the distillation reactor memory has plenty of hot asphalt, which can be extracted by the asphalt pump.
Product Parameters
SPECIFICATIONS FOR USED ENGING OIL RECYCLING MACHINE |
Capacity | 5TPD, 10TPD, 20TPD, 30TPD...300TPD |
Working Type | Continuous Working, Semi-Continuous Working |
Automatic Degree | Fully Automatic, Semi-Automatic |
Applicable Material | Crude Oil, Used Engine Oil, Waste Hydraulic Oil, Plastic Oil, Tyre Oil, Mixed Waste Oil, Other waste oil as customer required |
Heating Fuel | Fuel Oil, Natural Gas, Electric, Coal, Firewood |
Main Parts Material | Q345R Steel Plate, Alloy Steel Plate, Stainless Steel |
Machine Covering Area | Varies by Design and Capacity |
Technology Adopted | Catalytic Pyrolysis Distillation, Refined Filtration, Self-made Gaseous and Liquid Catalyst,etc... |
Technical Advantage
a. The complete set of unit produces no smoke and smell with favourable effects of environmental protection.
b. The pressure release device operates through water circulation, which greatly improves the security of the system.
c. The release of pressure during the production dramatically increases the output within certain time.
d. The heating system adopts hot air heating technology, which improves the safety performance of production and heating efficiency.
e. High efficiency fuel gas heating system to save energy greatly.
total production consumption
1. Power: 18KW to higher KW/hour in total (but it is not every device start at the same time).
2. Cooling circuit water: 50m3/hour in total (the water can be recirculated and the more the water flow, the better the cooling down).
3. Fuel for heating: 50-60KG coal for processing one ton raw oil for average.
4. Space for machine: 200 square meter or more (depends on real machine required.
Detailed Photos
Final Diesel Oil Report After Distination
Project | Diesel | Standard |
Oxidation stability | 2.2 | ≤2.5mg/100ml |
Sulfur content(%) | 0.3 | M/m ≤0.2 |
10% steamed residual carbon residue (%) | 0.33 | M/m ≤0.3 |
Ash content (%) | 0.16 | %M/m ≤0.01 |
Water content (%) | traces | / |
Mechanical impurities | / | / |
Density (G/ML) | 0.85 | 0.83-0.87 |
Solidifying point(ºC) | -10 | 0 |
Flash point (closed )(ºC) | 45 | 55 |
Movement viscosity | 3.5 | (20ºC ) mm2/s 3.0-8.0 |
Combustion value(Kcal) | 9500 | 8500 |
Colority | 1.2 | ≤3.5 |
Cetane number | 40 | 45 |
Acidity | / | Mgkoh/100ml≤7 |
FAQ
Q: What is the yield of this Waste Oil Recycling To Diesel Plant?
A: Typically the yield of our Waste Tire Pyrolysis Oil Distillation plant is between 85-90% (depending on variations of water content, light HC and others ingredients from waste oil.)
Q: what is the application of this waste oil distillation plant?
A: it is used for used engine oil, used motor oil, tyre oil,plastic oil, pyrolysis oil and other industrial oils.
Q: what is the capacity of used oil distillation plant?
A: the processing capacity is about 5ton, 10ton, 20ton, 30ton per day.
Q: is there any additive used inside?
A: yes, there will have additive use inside on the refining process, which is to further restoring the output oil
Q: what is the heating method of waste oil refining plant?
A: heating method is customized by customer, we support electric heating, fuel oil heating and gas heating.
주소:
No. 49, East Jinshui Road, Zhengzhou, Henan, China
사업 유형:
무역 회사
사업 범위:
제조 가공 기계
경영시스템 인증:
ISO 9000, ISO 14001, IATF16949
회사소개:
Henan Jinzhen Industry Co., Ltd.는 중국의 전문 폐기물 타이어 재활용 기계 및 스팀 보일러 공급업체이며, 폐타이어 오일 열분해 공장, 폐타이어-오일 열분해 기계, 폐플라스틱 발분해 공장, 고무 열분해 기계, 폐유 증류 기계, 열분해 오일 증류 공장, 디젤 기계, 폐유-디젤 기계, 증기 보일러, 열유 보일러 등의 연구에 특화된 사람 폐고무, 폐플라스틱, 폐유를 원료로 만들어 연료유 및 디젤을 생산할 수 있습니다.
2019년에 설립된 우리 회사는 기계 업계에서 오랜 역사를 가지고 있습니다. 칭다오 항구 근처에 위치하고 있어 편리한 수상 및 육지 교통편을 즐길 수 있습니다. 이 공장은 중국 허난성 신시앙 시티의 위빈 지구에 위치해 있습니다. 공장 커버는 12, 000 평방 미터입니다. 제품 개발, 제조 및 판매의 종합적인 강점을 가지고 있습니다.
Jinzhen Machinery는 125명 이상의 직원을 고용하고 있습니다. 직원 전직원의 노력을 통해 우리는 B 기계 제조업체가 되었습니다. 우리는 독일 및 일본 기술을 도입하여 제품 품질을 지속적으로 향상시키려고 노력해 왔습니다. 또한, 최고급 독일산 초내마모성 페인트를 사용하여 회사의 기술적 역량을 강화했습니다. 연간 생산 능력은 작년 800만 개 수출입니다.
이 회사는 ISO9001:2008, CE, BV 및 품질 관리 시스템 인증을 통과했습니다. 우리 제품은 국내외에서 잘 팔리고 있습니다. 주요 고객으로는 폴란드, 스페인, 그리스, 필리핀, 말레이시아, 베트남, 라오스, 캄보디아, 미얀마, 남아프리카, 가나, 나이지리아, 잠비아 등