기본 정보
모델 번호.
YY(Q)W-1400Y(Q) 1400KW
Product
Thermal Oil Boiler Heater
Boiler Fuel
Natural Gas, City Gas, Diesel, Heavy Oil
Medium
Organic Heat Transfer Material
Thermal Capaicty
30,000 Kcal/Hr to 2,000,000 Kcal/Hr
Highest Work Temperature
320c
Application
Asphalt Plant, Bitumen, Plastic and Rubber Factory
제품 설명
Organic Heat Carrier Boilers, Thermal Oil Boiler For Wood Hot Press Machine
Product Description
thermic Fluid Heater, thermal oil boiler, hot oil boiler
thermal capacity: 350kw-1400KW
Working pressure:0.8-1.0 MPA
Outlet temperature:320 C
Available fuel:natural gas, coke oven gas, bio-gas,liquefied petroleum gas, diesel, heavy oil, light oil, crude oil
Available industries:Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries
YYW series oil fired thermal oil boiler designed with three passes coiled tubes, the tail heat surface form the wet back type smoke-transfer chamber structure, to improve heat efficiency. large access door design of boiler's front and rear panel,hammer paint coating, which makes the inspection convenient,elegant outside.
Working Principle Of Thermic Fluid Heater
Oil-fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.
Thermal Oil Boiler (Heater) System
This thermic fluid heater has advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.
Its advantage is Free-Installation
The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.
Product Parameters
Item | Oil/Gas Fired Thermal Oil Boiler |
Rated thermal power | KW | 1200 | 1500 | 1800 | 2900 | 3500 | 4700 | 5900 | 7000 |
×104(Kcal/h) | 100 | 130 | 150 | 250 | 300 | 400 | 500 | 600 |
Boiler thermal efficiency % | >=92% |
Design pressure Mpa | 1.1 |
Max. working temperature ºC | 320 | 320 | 320 | 320 | 320 | 400 | 400 | 400 |
Medium volume m3 | 0.8 | 1.2 | 2.1 | 3.5 | 7.8 | 8.4 | 8.8 | 10.5 |
Medium circulation flow m3/h | 100 | 100 | 160 | 200 | 200 | 260 | 300 | 340 |
Main pipe diameter DN | 125 | 125 | 150 | 200 | 200 | 200 | 250 | 250 |
Fuel type | Diesel, Heavy oil, Natural gas, LPG, Coke oven gas |
Boiler size(m) | 1.92×4 | 1.95×4.3 | 2.4×4.3 | 2.8×6.3 | 2.92×6 | 3.23×6.7 | 3.26×7.45 | 3.26×7.9 |
Technical Advantage
Characteristics of heat-conducting oil boiler
1. The seal between the burner interface and the tube plate adopts a labyrinth type, which has good sealing performance and large expansion space, which prolongs the service life of the burner and improves the thermal efficiency.
2. The thermic fluid heater adopts two-coil structure, three-pass flue gas, compact design, saving space, adding air preheater, and thermal efficiency up to 92% or more.
3. Various operation safety protections make the boiler operation safer and simpler, with high temperature control accuracy (±1ºC) and good combustion effect.
4. The automatic control function is adopted to prolong the service life of the equipment while saving human resources.
5. Hot Oil Boiler can obtain a higher working temperature under a lower operating pressure, and has the technical characteristics of low pressure and high temperature.
6. It has complete operation control and safety monitoring devices, easy to operate, safe and reliable.
7. It can realize stable heating and precise temperature adjustment to meet different requirements
8. The thermal oil boiler has good thermal insulation, adopts high-efficiency thermal insulation materials and advanced construction technology, and has low heat dissipation loss on the furnace wall
Detailed Photos
Application
Owing to its characteristics of high heating temperature, low working pressure, and energy saving, the oil fired thermal fluid heater could be widely used in a variety of industrial heating process.
1) Textile industry - dyeing machine, drying rooms, high temperature machine, resin setting machine.
2) Food industry - cooking, drying, vegetable oil refining.
3) Chemical industry - oil chemistry, polymer industry, reaction tanks, distillation, concentration.
4) Plastics industry - plastics fired, extruded shape.
5) Rubber industry - hot press, hot extent, extrusion, vulcanization molding, injection, etc.
6) Paper industry - drying, corrugated paper processing, calender, glue roller.
7) Wood industry - hot processing, heat setting.
8) Machinery industry - drying, assembly processing
9) Building materials industry - plasterboard drying, asphalt heating, emulsified asphalt, asphalt concrete, concrete component maintenance, etc.
10)Synthetic fiber industry: polymerization, melting, spinning, extension, dry
FAQ
1.What are the heat-resistance temperature of grate and furnace?
The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100ºC, and the lower temperature could be 700ºC.
The highest heat resistance temperature of furnace could be about 1700ºC~1800ºC.
2.What is conduction oil/ hot oil / heat transfer fluid?
Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350ºC, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.
3.What about the delivery?
We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.
4.What about the maintenance?
I will offer you the timely maintenance way sheet after installation of the boiler mainly parts.
5. What's your main product?
Our main product scope:
1.Fire tube series Horizontal oil/gas fired boilers (0.5-30T/H, 0.7-21MW)
2.Water tube series Horizontal Oil/gas fired boiler (4- 35T/H )
3.Vertical fire tube series Vertical Oil/gas fired boiler (0.1-2 T/H, 0.06-0.7MW )
4.Large drum chain grate new type water fire tube boilers (1-35T/H, 0.7-29MW)
5. Double drum chain grate series water tube biomass boilers (4-35T/H, 1.4-29MW)
6. Electric boiler boiler ( 10--50 T/H)
7.Oil/Gas fired thermal oil boiler
8.Coal fired thermal oil boiler heater
주소:
No. 49, East Jinshui Road, Zhengzhou, Henan, China
사업 유형:
무역 회사
사업 범위:
제조 가공 기계
경영시스템 인증:
ISO 9000, ISO 14001, IATF16949
회사소개:
Henan Jinzhen Industry Co., Ltd.는 중국의 전문 폐기물 타이어 재활용 기계 및 스팀 보일러 공급업체이며, 폐타이어 오일 열분해 공장, 폐타이어-오일 열분해 기계, 폐플라스틱 발분해 공장, 고무 열분해 기계, 폐유 증류 기계, 열분해 오일 증류 공장, 디젤 기계, 폐유-디젤 기계, 증기 보일러, 열유 보일러 등의 연구에 특화된 사람 폐고무, 폐플라스틱, 폐유를 원료로 만들어 연료유 및 디젤을 생산할 수 있습니다.
2019년에 설립된 우리 회사는 기계 업계에서 오랜 역사를 가지고 있습니다. 칭다오 항구 근처에 위치하고 있어 편리한 수상 및 육지 교통편을 즐길 수 있습니다. 이 공장은 중국 허난성 신시앙 시티의 위빈 지구에 위치해 있습니다. 공장 커버는 12, 000 평방 미터입니다. 제품 개발, 제조 및 판매의 종합적인 강점을 가지고 있습니다.
Jinzhen Machinery는 125명 이상의 직원을 고용하고 있습니다. 직원 전직원의 노력을 통해 우리는 B 기계 제조업체가 되었습니다. 우리는 독일 및 일본 기술을 도입하여 제품 품질을 지속적으로 향상시키려고 노력해 왔습니다. 또한, 최고급 독일산 초내마모성 페인트를 사용하여 회사의 기술적 역량을 강화했습니다. 연간 생산 능력은 작년 800만 개 수출입니다.
이 회사는 ISO9001:2008, CE, BV 및 품질 관리 시스템 인증을 통과했습니다. 우리 제품은 국내외에서 잘 팔리고 있습니다. 주요 고객으로는 폴란드, 스페인, 그리스, 필리핀, 말레이시아, 베트남, 라오스, 캄보디아, 미얀마, 남아프리카, 가나, 나이지리아, 잠비아 등