기본 정보
Raw Material
Crude Oil, Used Engine Oil, Dirty Black Oil
End Products
Diesel Oil, Waste Gas, Slag
Average out-Put Oil Rate
85%-90%
Operating Pressure
Constant Pressure
Heating Material
Coal, Charcoal, Fuel Gas, Fuel Oil
Material of Reactor
Q245r Boiler Plate
Thickness of Reactor
16mm
Mode of Cooling
Circulating Water Cooling
Space Needed
Length: 30m, Width :10 M
Power Consumption
20 Kw/H
제품 설명
Low Cost Small Scale Waste Engine Oil Refinery Plant To Diesel
Product Description
waste oil distillation machine can recycle waste tire pyrolysis oil, waste plastic pyrolysis oil, waste engine oil, waste lubricant oil and oil sludge into diesel.
Input capacity: 5ton-30ton
Output capacity per day: 3ton-10ton
Fuel for heating: coal / wood / natural gas / distillate oil
Installation cover area: 300-400 square meters
Workers: need 2-3 workers for machine operation
Pyrolysis oil /used engine oil can be refined into valuable diesel oil through catalytic cracking and high temperature distillation technology. It is a method of separating mixtures based on differences in volatilities of components in a boiling liquid mixture. After beling distilled by the distillation plant, the oil may have dark color with bad smell, then we suggest to deep purify the oil, with Huayin matched color and smell removal system and special catalyst ,you will get clean diesel oil as final products with beautiful light yellow color.
Oil sludge usually comes from
1.Crude oil extraction - the oil sludge produced of crude oil extraction mainly comes from the surface treatment system, this kind of oil sludge generally has the characteristics of high oil content , high viscosity , fine particles and difficult to dehydrate.
2.Oil field gathering and transportation- mainly from the transfer station , the joint station of the tank , setting tank , sewage tank , grease trail mud , refinery oil treatment facilities , light hydrocarbon processing plant , natural gas purification device , etc.
3.Refinery wastewater treatment plant
4.Steel Smelting
5.Shipbuilding ship repair
3D Drawing for the waste oil distillation plant
Technological Process
Raw oil after dewater process goes into reactor. Heating, gasifying and cooling to get petrol and diesel component.
After heating and gasifying, Petrol gas expels from top outlet of catalyze tower, and goes into petrol storage tank after cooling through condenser.Then inject petrol into another big storage tank.
After heating and gasifying, Diesel gas expels from top outlet of catalyze tower, and goes into diesel storage tank after cooling through condenser. Then inject diesel into another big storage tank.Distilled diesel after treatment by oil reconcile tank,will becoming fuel oil with high quality.A little of flammable gas go through medium tank and into exhaust gas treatment equipment to be processed. And then go through water deal into furnace to burn.
Product Parameters
Item | Contents |
Raw material | Waste engine/motor oil Plastic pyrolysis oil Tire pyrolysis oil Lubrication oil |
Average out-put oil rate | 85%-90% |
End products | Diesel oil, waste gas, slag |
Structure form | Horizontal |
Operating pressure | Constant pressure |
Heating material | Coal, charcoal, fuel gas, fuel oil |
Model(Diameter*Length) (mm) | Reactor size | Capacity |
D1500*L3000 | 3 Ton/Day |
D2000*5000 | 5 Ton/Day |
D2800*6000 | 10 Ton/Day |
Material of reactor | Q245R&Q345R boiler plate |
Thickness of reactor | 16mm, 18mm |
Mode of cooling | Circulating water cooling |
Space needed | Length: 30m, Width :10 m at most |
Power consumption | Average 15 KW/h |
The main list of waste oil distillation equipment
a. distillation reactor
b. condensers
c. heat exchanger
d. dedusting device
e. saftey device
f. distillation column
g. oil tanks oil pumps
h. vcuume pump
Technical Advantage
1> Unique horizontal design with high oil yield
High effective and high profit.
Mobile design for the condensing parts and dedusting parts, has advantage of fast installation.
2> Safety
a:Adopting automatic submerged-arc welding technology
b:All of the welding place will be detected by the ultrasonic nondestructive testing method to ensure the welding quality and the welding shape.
c:Adopt manufacture process controlling system on the quality, every manufacture process, manufacture date, etc.
d:Equipped with anti explosion device, safety valves, emergency valves, pressure and temperature meters, as well as the alarming system.
3>Environmental-friendly
a: Emission Standard: Adopting special gas scrubbers to remove acid gas and dust from smoke
b: Smell during operation: Fully enclosed during the operation,there is no bad smell out.
c: Water pollution: No pollution at all.
4>Energy conservation and low cost on operation
Special covers of the reactors and chambers can keep hot during the heating in good efficiency as well as the direct heating system to save energy and cost
Detailed Photos
After Sales Service
1.Engineers with over ten years' waste to oil recycling experience will be dispatched to your place to provide technical service in guiding plant installation, plant commissioning as well as worker training.
2.We all know that good plant design and quality are essential, and good installation and training service are as important as or even more important than good plant design and quality. It is very dangerous if clients can not install or run the plant properly.
3.So, after plant installation finishes, our engineers are required to help you run the plant for at least 15 batches, enabling your workers to master all the operating skills needed and then operate the plant on their own.
주소:
No. 49, East Jinshui Road, Zhengzhou, Henan, China
사업 유형:
무역 회사
사업 범위:
제조 가공 기계
경영시스템 인증:
ISO 9000, ISO 14001, IATF16949
회사소개:
Henan Jinzhen Industry Co., Ltd.는 중국의 전문 폐기물 타이어 재활용 기계 및 스팀 보일러 공급업체이며, 폐타이어 오일 열분해 공장, 폐타이어-오일 열분해 기계, 폐플라스틱 발분해 공장, 고무 열분해 기계, 폐유 증류 기계, 열분해 오일 증류 공장, 디젤 기계, 폐유-디젤 기계, 증기 보일러, 열유 보일러 등의 연구에 특화된 사람 폐고무, 폐플라스틱, 폐유를 원료로 만들어 연료유 및 디젤을 생산할 수 있습니다.
2019년에 설립된 우리 회사는 기계 업계에서 오랜 역사를 가지고 있습니다. 칭다오 항구 근처에 위치하고 있어 편리한 수상 및 육지 교통편을 즐길 수 있습니다. 이 공장은 중국 허난성 신시앙 시티의 위빈 지구에 위치해 있습니다. 공장 커버는 12, 000 평방 미터입니다. 제품 개발, 제조 및 판매의 종합적인 강점을 가지고 있습니다.
Jinzhen Machinery는 125명 이상의 직원을 고용하고 있습니다. 직원 전직원의 노력을 통해 우리는 B 기계 제조업체가 되었습니다. 우리는 독일 및 일본 기술을 도입하여 제품 품질을 지속적으로 향상시키려고 노력해 왔습니다. 또한, 최고급 독일산 초내마모성 페인트를 사용하여 회사의 기술적 역량을 강화했습니다. 연간 생산 능력은 작년 800만 개 수출입니다.
이 회사는 ISO9001:2008, CE, BV 및 품질 관리 시스템 인증을 통과했습니다. 우리 제품은 국내외에서 잘 팔리고 있습니다. 주요 고객으로는 폴란드, 스페인, 그리스, 필리핀, 말레이시아, 베트남, 라오스, 캄보디아, 미얀마, 남아프리카, 가나, 나이지리아, 잠비아 등