기본 정보
모델 번호.
350kW, 500kW, 700kW
Media
Organic Heat Transfer Material
Burning Style
Chamber Combustion Boiler
Product
Thermal Oil Boiler Heater
Boiler Fuel
Natural Gas, City Gas, Diesel, Heavy Oil
Medium
Organic Heat Transfer Material
Thermal Capaicty
30,000 Kcal/Hr to 2,000,000 Kcal/Hr
Highest Work Temperature
320c
Application
Asphalt Plant, Bitumen, Plastic and Rubber Factory
제품 설명
350kW, 500kW, 700kW Industrial Heat Conduction Hot Oil Boiler For Textile Printing And Dyeing
Product Description
thermic Fluid Heater, thermal oil boiler, hot oil boiler
thermal capacity: 350kw-1400KW
Working pressure:0.8-1.0 MPA
Outlet temperature:320 C
Available fuel:natural gas, coke oven gas, bio-gas,liquefied petroleum gas, diesel, heavy oil, light oil, crude oil
Available industries:Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries
The organic heat carrier furnace is the once through special boiler, uses light oil, heavy oil, liquefied petroleum gas, natural gas, artificial gas, etc. as fuel, and the heat transfer oil is used as a heat carrier, and the circulating pump is used to force liquid phase circulation to transfer the heat energy to heat equipment, and then returns to the heating furnace to reheat the heat.
Working Principle Of Thermic Fluid Heater
Oil-fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.
Thermal Oil Boiler (Heater) System
This thermic fluid heater has advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.
Its advantage is Free-Installation
All thermal oil boilers are assembly structure which is easy for installation by just connecting system device by pipes. Intelligent system control of thermal oil fluid haters makes boiler operation easier and more simple. Controller with imitation screen display has auto igniting, burning, circulation pumps control, alarm, etc. functions
Product Parameters
Model No. | Thermal power(kcal/h) | Heating efficiency (%) | Max. working temp.(ºC) | Medium circulation(M3/H) | Transport size (mm) | Weight (Kg) |
YY(Q)W-120Y(Q) | 10*104 | ≥92.26 | 340 | 12.5 | Φ1060*2045 | 1215 |
YY(Q)W-240Y(Q) | 20*104 | ≥92.26 | 340 | 18 | Φ1020*1980 | 1355 |
YY(Q)W-350Y(Q) | 30*104 | ≥92.26 | 340 | 30 | Φ1212*2310 | 1590 |
YY(Q)W-500Y(Q) | 40*104 | ≥92.26 | 340 | 30 | Φ1212*2730 | 1680 |
YY(Q)W-700Y(Q) | 60*104 | ≥92.26 | 340 | 60 | Φ1400*3410 | 2715 |
YY(Q)W-900Y(Q) | 80*104 | ≥92.26 | 340 | 80 | Φ1616*3400 | 3142 |
YY(Q)W-1200Y(Q) | 100*104 | ≥92.26 | 340 | 100 | Φ1616*4000 | 3660 |
YY(Q)W-1400Y(Q) | 120*104 | ≥92.26 | 340 | 100 | Φ1820*4905 | 5420 |
YY(Q)W-2000Y(Q) | 160*104 | ≥92.26 | 340 | 100 | Φ1840*4950 | 7850 |
YY(Q)W-2400Y(Q) | 200*104 | ≥92.26 | 340 | 160 | Φ2060*4700 | 8850 |
YY(Q)W-3000Y(Q) | 250*104 | ≥92.26 | 340 | 180 | Φ2060*5450 | 9210 |
YY(Q)W-3500Y(Q) | 300*104 | ≥92.26 | 340 | 200 | Φ2430*5965 | 9960 |
YY(Q)W-4100Y(Q) | 350*104 | ≥92.26 | 340 | 250 | Φ2630*6990 | 1120 |
YY(Q)W-4700Y(Q) | 400*104 | ≥92.26 | 340 | 250 | Φ2830*7100 | 1230 |
Technical Advantage
High Quality
YY(Q)W series thermal fluid boiler heater has skid-mounted design and full automatic control system. The heat carrier is thermal fluid oil, boiler's working pressure ≤1.0MPa, working temperature ≤310ºC. Adopting three-pass structure, 3 layer corrugated coil rings.
Free-Installation
The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.
Excellent Structure
Free-Assembly,Portable System,Three Fire-Passes,New Wet-Back Design,Corrugated Furnace, Fire-tube
Simple Operation
Automatic PLC ON/OFF,Visible Oil Temperature,Visible Working Pressure,Visible Exhaust-gas Temperature,Adjustable Oil Temp. ≤310ºC
Detailed Photos
Application
The series of thermal oil heater is widely used in the following industries
l Petrochemical Industries:polymerization, melted, condensation, distillation, removal H2.
l Oil industry:fat and acid distillation, grease decomposition, concentrated, esterification, vacuum deodorizer, high-temperature cooking, advanced salad oil.
l Synthetic fiber industry: polymerization, melt spinning, extending; drying.
l Textile printing and dyeing industry: heat setting, hot melt dyeing, melt bake calendering drying, high temperature sterner, oar yarn.
l Plastics and rubber industry:hot pressing, hot cast, vulcanization molding, calendering injection machine, plastic mixer, conveyor dryer, screw ext-ruder.
l Paper Industry: dry, corrugated paper processing, egg tray, food cardboard drying, calendering machine, roller.
l Timber industry: multi layer plywood, fiberboard molding, plywood, wood drying, steaming equipment.
l Building materials industry: road bitumen heating, gypsum board drying, heating bitumen concrete, concrete elements curing, drying equipment.
l Air-conditioning industry:industrial plants, residential and hotel building heating.
l Detergent Industry: cooking boiler, autoclave, spray-washing tower, a conveyorized dryer, lipolysis device distillation column.
l The automotive industry:the tunnel-type drying room, degreasing baths, phosphate processing equipment.
l Electrical equipment industry: calendering machine, the platen machines, vacuum pan, dryer.
FAQ
FAQ of thermal oil boiler
1.What is the highest temperature that thermal oil heater could achieve?
thermal oil heater can reach as high as 330ºC, and working under low pressure (<1.0MPa)
2.What are the heat-resistance temperature of grate and furnace?
The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100ºC, and the lower temperature could be 700ºC.
The highest heat resistance temperature of furnace could be about 1700ºC~1800ºC.
3.What is conduction oil/ hot oil / heat transfer fluid?
Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350ºC, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.
주소:
No. 49, East Jinshui Road, Zhengzhou, Henan, China
사업 유형:
무역 회사
사업 범위:
제조 가공 기계
경영시스템 인증:
ISO 9000, ISO 14001, IATF16949
회사소개:
Henan Jinzhen Industry Co., Ltd.는 중국의 전문 폐기물 타이어 재활용 기계 및 스팀 보일러 공급업체이며, 폐타이어 오일 열분해 공장, 폐타이어-오일 열분해 기계, 폐플라스틱 발분해 공장, 고무 열분해 기계, 폐유 증류 기계, 열분해 오일 증류 공장, 디젤 기계, 폐유-디젤 기계, 증기 보일러, 열유 보일러 등의 연구에 특화된 사람 폐고무, 폐플라스틱, 폐유를 원료로 만들어 연료유 및 디젤을 생산할 수 있습니다.
2019년에 설립된 우리 회사는 기계 업계에서 오랜 역사를 가지고 있습니다. 칭다오 항구 근처에 위치하고 있어 편리한 수상 및 육지 교통편을 즐길 수 있습니다. 이 공장은 중국 허난성 신시앙 시티의 위빈 지구에 위치해 있습니다. 공장 커버는 12, 000 평방 미터입니다. 제품 개발, 제조 및 판매의 종합적인 강점을 가지고 있습니다.
Jinzhen Machinery는 125명 이상의 직원을 고용하고 있습니다. 직원 전직원의 노력을 통해 우리는 B 기계 제조업체가 되었습니다. 우리는 독일 및 일본 기술을 도입하여 제품 품질을 지속적으로 향상시키려고 노력해 왔습니다. 또한, 최고급 독일산 초내마모성 페인트를 사용하여 회사의 기술적 역량을 강화했습니다. 연간 생산 능력은 작년 800만 개 수출입니다.
이 회사는 ISO9001:2008, CE, BV 및 품질 관리 시스템 인증을 통과했습니다. 우리 제품은 국내외에서 잘 팔리고 있습니다. 주요 고객으로는 폴란드, 스페인, 그리스, 필리핀, 말레이시아, 베트남, 라오스, 캄보디아, 미얀마, 남아프리카, 가나, 나이지리아, 잠비아 등