10TPD Waste Motor Oil Recycling to Diesel Distillation Machine
Product Description
5-30T waste oil distillation machine to diesel is amazing technical solution for different waste oil such as waste engine oil, pyrolysis oil, sludge oil, mud oil,very thick dirty impurities oil . This technology is mainly to use steam generator to make steam which can have effection with oil gas to reduce pressure to vacuum level.then when the operation is going on, diesel can be produced at 300ºC -550ºC ,however,now the highest temperature is 300ºC -380ºC .in this way oil quality will be highly improved and also fuel can be used less.
Waste Oil Recycling Plant process waste engine oil, crude oil, pyrolysis oil, oil sludge materials to get diesel. This Waste Engine Oil Refining Plant will need one-time catalyst which is produced by our company only,there is no need to buy from other catalyst factory as we have the catalyt formula .it is customised
The raw material for waste oil recycling machine
1) crude oil of Waste plastics ,waste rubber refining
2) Waste oil such as: waste diesel engine oil, waste oil, waste slag, etc
3) waste crude oil
4) Waste wash a oil
The final product after distillation
|
No. |
End Production |
Yield |
Usage |
|
1 |
Diesel |
73% |
Used for diesel engine |
|
2 |
Gasoline |
12% |
Used for gasoline engine |
|
3 |
Residue Oil |
9% |
* Feeding into Pyrolysis Machine for second Pyrolysis
* Sold directly for building road |
|
4 |
Non-Condensible Gas |
3% |
Recycle as Heating fuel after treated by Gas-treatment System |
|
5 |
Other |
3% |
* Water and impurity 2%
* Loss 1% |
Working Process of Waste Oil Distillation Machine
1. Heat the heat conduction oil with the heat conduction oil furnace;
2. The heat conducting oil flows into the coil in the distillation reactor and heats the waste engine oil in the distillation reactor;
3. When the waste engine oil is heated to a certain temperature, the reactor is directly heated with fuel. As the temperature increases, the waste engine oil produces oil and flows into the buffer tank. The odorous light components in the waste engine oil can be distilled and collected into the distillation tank.
4. The oil gas from the buffer tank enters the catalytic tower. In the catalytic tower the macromolecular oil gas are broken down into smaller molecules .
5. Oil gas of small molecules enter the cooling system through the catalytic tower and are cooled into liquid oil;
6. After the oil gas steam out, the distillation reactor memory has plenty of hot asphalt, which can be extracted by the asphalt pump.
Product Parameters
|
SPECIFICATIONS FOR USED ENGING OIL RECYCLING MACHINE |
|
Capacity |
5TPD, 10TPD, 20TPD, 30TPD...300TPD |
|
Working Type |
Continuous Working, Semi-Continuous Working |
|
Automatic Degree |
Fully Automatic, Semi-Automatic |
|
Applicable Material |
Crude Oil, Used Engine Oil, Waste Hydraulic Oil, Plastic Oil, Tyre Oil, Mixed Waste Oil, Other waste oil as customer required |
|
Heating Fuel |
Fuel Oil, Natural Gas, Electric, Coal, Firewood |
|
Main Parts Material |
Q345R Steel Plate, Alloy Steel Plate, Stainless Steel |
|
Machine Covering Area |
Varies by Design and Capacity |
|
Technology Adopted |
Catalytic Pyrolysis Distillation, Refined Filtration, Self-made Gaseous and Liquid Catalyst,etc... |
Technical Advantage
A. Complete equipment production process is in the smokeless and tasteless environments, environmental protection.
B. The constant pressure device adopts water circulating, greatly improving the safety of the whole system.
C. In the process of production, after decompression, the whole system can greatly improve the output of unit of time, and at the same time, improve product quality.
D. Heating system uses hot air heating process in order to not only improve the safety performance of the production, but also improve the heating efficiency
E. Efficient gas heating system, during the oil refining process, when heated gas is up to 150, can produce a large number of normal temperature and in constant pressure non-liquefied gas is methane to butane ,these gases in our specially designed gas nozzle inside full combustion, have a lot of energy, greatly save the energy
F. Flue dust removal system is equipped with two-way water impact type cyclone dust chamber, ensure flue export emissions reached national emission standard
Detailed Photos
Final Diesel Oil Report After Distination
|
Project |
Diesel |
Standard |
|
Oxidation stability |
2.2 |
≤2.5mg/100ml |
|
Sulfur content(%) |
0.3 |
M/m ≤0.2 |
|
10% steamed residual carbon residue (%) |
0.33 |
M/m ≤0.3 |
|
Ash content (%) |
0.16 |
%M/m ≤0.01 |
|
Water content (%) |
traces |
/ |
|
Mechanical impurities |
/ |
/ |
|
Density (G/ML) |
0.85 |
0.83-0.87 |
|
Solidifying point(ºC) |
-10 |
0 |
|
Flash point (closed )(ºC) |
45 |
55 |
|
Movement viscosity |
3.5 |
(20ºC ) mm2/s
3.0-8.0 |
|
Combustion value(Kcal) |
9500 |
8500 |
|
Colority |
1.2 |
≤3.5 |
|
Cetane number |
40 |
45 |
|
Acidity |
/ |
Mgkoh/100ml≤7 |
FAQ
Q: What is the yield of this Waste Oil Recycling To Diesel Plant?
A: Typically the yield of our Waste Tire Pyrolysis Oil Distillation plant is between 85-90% (depending on variations of water content, light HC and others ingredients from waste oil.)
Q: How many areas are required to build the Waste Tire Pyrolysis Oil Distillation plant?
A: The land area required usually depends on the capacity of your plant. We can calculate the area needed and give you the plant designs.
Q: What is the warranty of the Waste Engine Oil Distillation plant?
A: 12 months free guarantee and life long standard paid service.
Q: Can you install the production line and train our stuffs?
A: Yes we can. We'll send engineers to help you install the used motor Oil Distillation plant and train your workers until the machine is skillfully operated.
Q: What is the operation cost of this Waste Tire Oil Distillation plant?
A: Please consult one of our sales representative for more information about operation cost and turnover of capacity you are interested. We will be providing you the professional budgets breakdown for your particular project.
