반 저장 Calorifier/Heat 교환기 탱크

SEMI-STORAGE CALORIFIER

Semi-Storage Calorifiers are designed for use in environments where there is high-peak hot water demand, but limited plant room space.

Each unit incorporates a buffer vessel and combining a packaged plate heat exchanger, U-tube battery or ''shell & plate" heat exchanger together with circulation pump and isolation valve. It also makes a tail-on range of semi-storage calorifier with varying capacities and heat exchanger power ratings.

The principle of semi-storage calorifier is equipped with a built-in circulation pump ensuring a constant flow rate through the stainless steel heat exchanger and into the storage tank. The capacity of heat exchanger is set above the calculated peak hourly demand. The heat exchanger is designed to raise the temperature of the secondary water to desired temperature through the heat exchanger. The thermostat/controller can stops the circulation pump when the desired temperature is achieved.
 
The required storage volume is typically only a quarter of an equivalent storage calorifier. This not only assures a maximum reserve of hot water but also eliminates any areas of cool water to decrease the chance of growth of Legionella pneumophilia.


FEATURES:

·Pressure rating upto 25bar,storage capacity from 100 Litres to 15,000 Litres

·100% Austenitic stainless steel 304,316,316L or 316Ti 

·Fully hygienic for drinking water without sacrificial anode or anti vacuum vale

· World approved high quality flux cored wire welding and plasma ARC welding technique are used

· Even water temperature distribution

· High K-value of "Shell & plate" heat exchanger in order to minimize the heat transfer area.

· "Shell & plate" heat exchanger has compact size which is suitable for the limited plant room

·Easy for installation, maintenance and service

·Higher efficiency thermal exchange

·Integrated control panel with digital display controller to monitor and control the water temperature. Data can be transfer to BMS.

·Standard conformity:PED/97/23,BS PD5500,DIN4753 or ASME






INTERNATIONAL STANDARDS OF QUALITY,

Complete customer satisfaction is our goal,and IES-RUDERT strives to develop,implement,maintain and enhance effectiveness of our products to the highest international standards.