기본 정보
Application
Construction, Chemical Industry, Mineral Operation
Automatic Grade
Automatic
Kaolin Rotary Kiln Gradient
4%
Kaolin Rotary Kiln Speed
4r/Min
Kaolin Rotary Kiln Length
36m
Kaolin Rotary Kiln Spare Parts
All Using Life
Installation
Guide by Engineer
Kaolin Rotary Kiln Weight
53t
운송 패키지
Sea Worthy Packing
제품 설명
Structure Features of Kaolin Rotary Kiln
Kaolin Rotary Kiln is made of rolled steel plates; its structure is optimized by computer software, and features" longitudinal flexible and transverse rigid", which improved the loading of supporting device and stability of The supporting roller bearings features smaller width over diameter ratio L/D, leading to its higher reliability. Kaolin Rotary Kiln high-started torque motor for cement industry Kaolin Rotary Kiln is applied for driving system. The sealing of labyrinth plus spring pressing with asbestos heat isolation layers attached, is applied higher so that reliability and longer service life Kaolin Rotary Kiln of sealing are achieved.
Application Kaolin Rotary Kiln
Kaolin Rotary Kiln belongs to building material equipment, which can be divided into cement kiln, metallurgy chemical kiln and lime kiln according to different materials.
Kaolin Rotary Kiln is used for making of cement clinker and there are dry and wet methods to make cement. metallurgy chemical kiln is used in metallurgy industry and ironworks for lean iron ore, chromium ore and ferronickel ore calcimine. Kaolin Rotary Kiln is used for calcimine of high aluminum vandal ochre in refractory material industry; for calcimine of calotte and aluminum hydroxide in aluminum manufacturer; for claiming of chrome sand ore and chrome powder ore in chemical plant.
Working Principles of Kaolin Rotary Kiln:
Kaolin Rotary Kiln for activated carbon producing is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder.
As Kaolin Rotary Kiln for activated carbon producing rotates, material grad-ually moves down towards the lower end, and may undergo a certain amount of stirring and mixing.
Hot gases pass along Kaolin Rotary Kiln, sometimes in the same direction as the process material (co current), but usually in the opposite direction (counter current).
The hot gases may be generated in an external furnace, or may be generated by a flame inside Kaolin Rotary Kiln. Such a flame is projected from a burner pipe (or "firing pipe") which acts like a large Bunsen burner. The fuel for this may be gas, oil or pulverized coal.
Technical Parameters
Model | Technical Parameters | Reducer | Motor | Support Number | Weight,t |
Revolution Speed, r/min | Obliquity,% | Capacity,t/h | Model | Ratio | Model | Power,kw | Revolution Speed, r/min |
Φ1.6x32m | 0.158-0.258 | 3 | 0.6-2 | PM750 | 48.57 | JZJY61-4 | 15 | 1200/120 | 3 | 46.82 |
Φ1.8x45m | 0.66-1.98 | 4 | 1-4.5 | UT2-110 | 163.36 | JZS-81 | 30/10 | 1410/470 | 3 | 68 |
Φ1.9/1.6x36m | 0.53-1.59 | 4 | 2.5-3 | JZQ750-I | 48.85 | JZT-72-4 | 30 | 1200/400 | 3 | 53 |
Φ2.1/1.8x36m | 0.5-1.51 | 4 | 4 | UT2-110 | 163.36 | JZS-81 | 30/10 | 1410/470 | 3 | 75 |
Φ2.2x50m | 0.125-1.25 | 3.5 | 5 | ZS145-11 | 157 | YCT280-4A | 30 | 1320/132 | 3 | 130.71 |
Φ2.5x50m | 0.516-1.549 | 3.5 | 8 | ZS165-7 | 99.6 | YCT355-4A | 55 | 1320/140 | 3 | 167.5 |
Φ3x48m | 0.3309-3.309 | 3.5 | 28 | ZI130-14 | 32.11 | ZSN4-250-21B | 90 | 1000/100 | 3 | 237 |
Φ3.2x50m | 0.398-3.975 | 3.5 | 42 | ZI130-16 | 40.85 | ZSN4-280-11B | 190 | 1500/150 | 3 | 263 |
Φ3.3x52m | 0.391-3.91 | 3.5 | 50 | ZSY500-28 | 27.707 | ZSN4-315-082 | 190 | 1000/100 | 3 | 280.8 |
Φ3.6x55m | 3.5 | 3.5 | 76 | ZS117-5-II | 79.2 | ZSN-280-11B | 125 | 1000/200 | 4 | 368.7 |
Φ4x60m | 0.396-3.96 | 3.5 | 105 | ZSY630-35.5 | 34.601 | ZSN4-355-092 | 315 | 1000/100 | 4 | 487.5 |
Φ4.2x60m | 0.4165-4.165 | 3.5 | 143 | ZSY710-35.5 | 35.526 | ZSN4-355-12 | 420 | 1000/100 | 4 | 556.1 |
Φ4.5x65m | 0.46-1.45 | 4 | 168 | JH800C-SW306 | 35.5 | ZSN4-400-22 | 560 | 1000/100 | 4 | 710 |
Φ4.8x74m | 0.35-4 | 4 | 208 | JH710C-SW305-40 | 42.226 | ZSN4-400-092 | 630 | 1500/130 |
주소:
100 Meters South of Huagong Road and West Fourth Ring Road Intersection, Westwards, Zhongyuan District, Zhengzhou, Henan, China
사업 유형:
제조사/공장
사업 범위:
야금광산물과 에너지, 제조 가공 기계
회사소개:
Henan Lanji Machinery Manufacturing Co., Ltd.는 과학 연구, 생산 및 마케팅에 통합된 원온-스톡 채광 기계 제조 기업입니다. 중국 히그-테크 개발 구역 정저우에 위치해 있으며 면적이 8만 평방미터입니다. 중대형 금속 가공, 리베팅 및 설치 장비 등 200개 이상의 장비가 있습니다. 엔지니어는 50명 이상입니다.
당사의 주요 제품: 이점효과 장비, 분쇄 장비, 모래 제조 장비, 시멘트 장비, 공기 콘크리트 블록 생산 라인. 금속 공학, 광산, 철도, 고가도로, 건축 자재 산업에서 널리 사용됩니다. 역화, 세라믹 산업 등 광석 선광 장비의 전체 세트에는 볼 밀, 분쇄기, 자석 분리기, 부양기, 나선형 분류기, 회전식 건조기는 철광석, 구리 광석, 금광석, 납 및 아연, 망간 광석 등 비철 금속을 분리하는 데 널리 사용됩니다. 몰리브덴 광석 등 및 플루오르라이트, 석영 등과 같은 비금속 광물 죠 크러셔, 임팩트 크라샤, 모래 제작 기계 진동 스크린, 모래 세탁기, 벨트 컨베이어가 공항, 철도, 하이웨이, 도로, 비포장, 등 공기 콘크리트 블록은 새로운 비축 물질에 중요한 역할을 했습니다. 우리는 프로그램 설계, 프로세스 흐름 설계, 표준 및 비표준 설계를 고객에게 제공할 수 있습니다.
이 회사는 ISO9001-2008 품질 인증을 통과했으며, 이 생산물은 남아시아, 러시아, 중앙아시아, 아프리카, 중동, 그 외
우리의 "고급 기술, 품질 우선, 진실한 서비스, 명성 우선". 우리는 완벽한 애프터 서비스와 품질 추적 시스템을 한 세트로 구입한 후, 고객이 걱정 없이 이용할 수 있도록 할 수 있습니다.
우리는 상호 이익과 진급성을 위해 전 세계의 고객과 진심으로 협력하기를 희망하며, 우리는 협력을 통해 우리의 이론을 만져보고 있습니다!
전화: +86-371-67833678
휴대폰: +86-13613714234