기본 정보
Color
as Per Your Requirement
After-Sale Service
for Whole Using Life
Installation
Under Our Engineer′s Guide
Mining Object
Metallic and Non-Metallic Ore Excavator
제품 설명
Cone crusher is generally used as secondary crusher for medium or above medium hardness, such as iron ore, copper ore, limestone, quartz, granite and sand stones ect., in metallurgical, construction, road building, chemical, silicate industries. Compare with jaw crusher, the spring safety system of cone crusher acts as an overloading protection system that allows hard materials(such as iron) to pass through the crushing chamber without damage to the machine. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The PYB series cone crusher is widely applied to coarse crushing, PYZ for medium crushing and PYD for fine crushing.
Working Principle:
Spring Cone Crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone is supported by spherical bearing and fixed on hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. Cone crusher's movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when Cone crusher's movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined.
Features:
1. Large crushing ratio and high working efficiency;
2. Perfect lubrication device guarantees machine reliability;
3. High quality wear-resistant parts reduce operating cost;
4. Long life and wide scope of application;
5. High capacity and less wear costs;
6. Stable running performance and easy operation.
주소:
Room501, East Building 5, Jincheng Int′l Plaza, Nongke Road, Zhengzhou, Henan, China
사업 유형:
제조사/공장, 무역 회사, 다른
사업 범위:
제조 가공 기계
회사소개:
정저우 한비기계류 및 장비 주식회사는 건설 기계류를 전문으로 하는 전문 제조, 해외 마케팅 및 무역 회사입니다. 우리는 브랜드 관리와 OEM 사업에 몰두합니다. 우리는 공동 재고 및 재고 관리를 기반으로 하는 5개 이상의 OEM 공장을 가지고 있습니다. HANVY는 이미 7가지 부문에서 작업을 진행 중이며, 지상 이동 장비, 콘크리트 기계, 파일링 및 연무 기계, 아스팔트 장비, 도로 장비 및 도로 정비 장비 등 30가지 이상의 건설 장비를 갖추고 있습니다