기본 정보
제품 설명
Thank you for selecting this product. The product is a sensor type heart rate monitor that will detect heart rate and send heart rate data to the Smart phone(all the brand smartphone in marketing).
IMPORTANT This product is for sport purposes only and it is not meant to replace any medical advice. This manual contains important safety and care information, and provides step-by-step instructions for using this product. Read the manual thoroughly, and keep it in a safe place in case you need to refer to it later.
PRODUCT OVERVIEW:
1.Heart rate receiver
2.Heat rate chest strap
Switch
A-Middle
B-Right
3.Smart phone: Sold separately
GETTING STARTED
1.UNPACKING THE PRODUCT
In this box, you will find :
a.Heart rate receiver
b.Heart rate chest belt
c. Adjustable elastic belt
d.CR2032 and CR1632 lithium batteries already installed
2. - Go to APP Store and install the St@ble heart rate.
Droid- Go to play store and install the St@ble heart rate.
3. Connect receiver and smart phone by 3.5 phone jack at top of phone.
Note: Heart rate receiver will allow ear phones to be inserted for music.
4. To wear chest strap
a) Wet the conductive pads on the underside of the chest belt with a few drops of water, Saliva or conductive gel to ensure solid contact.
b) Strap the heart rate chest belt across your chest. To ensure an accurate heart rate signal, adjust the strap until the belt fits snugly below your (chest) pectoral muscles.
5. To run software on smart phone.
a)Click to continue
b)Click start to detect heart rate
BATTERIES
The receiver use 1 x CR1632 3V batter and the heart rate chest belt use 1 x CR2032 3V battery. Both are already installed. The batteries typically last one year. We highly recommend that you contact the retailer or our customer service department if you need to replace them
To replace the receiver battery:
1. Undo the screw and remove the compartment lid.
2, Remove the old battery and slide the new battery into the battery compartment with the +side upwards.
3, Replace the compartment lid and screw.
To replace the chest belt battery:
1. Using a coin, twist the compartment lid counter-clockwise until it clicks out of place.
2. Remove the old battery and insert the new battery with the +side upwards.
3. Replace the battery compartment lid by twisting it clockwise until it is firmly in place.
IMPORTANT
1. Non-rechargeable and rechargeable batteries must be disposed of properly. For this purpose, special containers are provided for non-rechargeable and rechargeable battery disposal at communal collection centers.
2. Batteries are extremely dangerous when swallowed! Therefore, keep batteries and small articles away from children. If a battery has been swallowed seek immediate medical advice.
3. The batteries supplied must not be recharged, reactivated by any other means, dismantled, put into fire or short-circuited.
주소:
Room 821, No. 2075, Kongjiang Rd., Shanghai, China
사업 유형:
제조사/공장, 다른
사업 범위:
철물
회사소개:
우리는 제조 대리점이며, 더 많은 주문을 위해, 우리는 제조로부터 높은 품질로 낮은 가격을 얻을 수 있습니다, 그래서 당신이 부시 브레이커, 싱글 맨 크로퍼 또는 체인 톱, 알고 싶은 경우에, 나는 당신이 선택하는 견적 가격을 줄 것입니다.