기본 정보
운송 패키지
According Customer′s Request
제품 설명
Feature of PPR pipes and fittings:
Products performance:
1. Light weight: Density is 0.89-0.9g/m3, is only the 1/9 of steel pipe and 1/10 of copper tubing. Due to light weight, so it realy easy for construction.
2. Non-poisonous. PPR material is component with carbine and hydrogen without add any stabilizer. So this figure has met the Nation Authority bureau stand.
3. Good hear resistant. It can be for longotime service in a water temperature 70, or for short-time service in 95, the soften temperature is 140.
4. Long service life. In the normal temperature and pressure, the pipe life is more than 50 years.
5. Good abrasion resistant. Except certain oxidant, PPR pipe can resist many chemical matters, and can not rust, corrosion.
6. Good thermal insulation. The thermal conduct coefficient is lower than other pipe coefficient, example cooper pipe is 333W/mk, so PPR pipe has a good thermal insulation ability.
7. Low swelling ability. Due to the PPR pipe elastic modulus is samll. So it is good for inserting in the wall and underground.
8. Low flow resistant. Interor should be smoothly, dray coeffcient is 0.007, much lower than other metal pipe. Flow ability is higher than metal pipe 30%.
9. Good connection. PPr pipe adopts the thermal melting connection, so make pipe and pipe fitting connect perfectly, The impackt and coiling ability is better than other part to pipe, so that avoid the water leakage.
10. No pollution to enviornment. We use the pipe tahat is not bad for our environment and also will not cause any pollution.
11. Full line of products. PPR pipe system is comlete and can deal with general engineering requirements.
12. Moudest coast. The cost of PPR pipe system is the same as that zinc-plating pipe. Installation is easy, cost is low.
PP-R fitting physico-machanical performance of PP-R fitting |
Item | Experimental temperature | Experimental time h | Experimental pressure Mpa | Amount of experiment | Requries | |
Longitudinal shrink ratio | 135±2 | en≤8mm:1 8mmen≤16mm:2 en>16mm:4 | | 3 | Ratio of failure10%sample quantity | |
Treely supported beam impact test | 0±2 | | | 10 | No crake, No leaka | |
Hydrostatic static pressure experiment | 20 | 1 | 16.0 | 3 | |
95 | 22 | 4.2 | |
95 | 165 | 3.8 | |
95 | 1000 | 3.5 | |
Heat stabilization test in hydrostatic condidtion | 110 | 8760 | 1.9 | 1 | |
|
Hot recycle test | Hightest 95, lowest 20 | Times of recycle 5000 | 1 | 1 | |
Melt flow ration, MFR(230/2.16kg)g/10min | Change ratio≤30% raw material | |
주소:
B13 Aluminum Area, Pingguo Industrial District, Baise, Guangxi, China
사업 유형:
제조사/공장
사업 범위:
건축과 장식재료
경영시스템 인증:
ISO 9001, ISO 14001, ISO 14000
회사소개:
Guangxi Nancai Pipes Co., Ltd.는 플라스틱 파이프의 선도적인 전문 제조업체입니다.
우리는 중국에서 PE, PPR, PVC 파이프 생산을 전문으로 합니다. 생산, 파이프 설계, 원재료 및 제품의 품질 관리에 대한 오랜 경험을 바탕으로 Nancai는 플라스틱 파이프 산업 전문가로 자리매김했습니다.
이 회사는 핑구오 카운티의 산업 공원에 위치해 있으며, 200 에이커의 면적을 차지하고 있습니다. 총 투자 금액은 2000만 달러, 생산 용량은 연간 2000만 톤, 판매 수익은 2012년 8000만 달러에 이릅니다.
이 글로벌 시장은 동유럽, 동남 아시아, 북아프리카, 북미, 오세아니아의 20개국 이상을 대상으로 합니다.