차량 엔진 진단용 휴대용 산업용 굴절식 보어스코프, 고온 검사, 최대 300도

• After-sales Service: Maintenance
• Warranty: 1 Year
• 지름: 7.5mm
• 케이블: 1.0M, 사용자 지정 허용
• 팁 굴절: 2방향 굴절
• 카메라 길이: 17mm
• 모델 번호.: CL801T
• 방수 표준: ip58
• 이미지 센서: 1/6"
• 조명: 8개 LED 조명
• 참석 모드: Windows/Android 컴퓨터 또는 휴대폰
• 냉각 구멍 파이프 직경: 8mm
• 열안정성: 300°C
• 운송 패키지: Carton
• 사양: 18*40* 50
• 등록상표: YKndt
• 원산지: China
• 세관코드: 8525801390
• 생산 능력: 200sets/Mouth

제품 설명

portable industrial articulating borescope for car engine diagnose, high temperature inspection, max 300 degree

1. Camera parameters and system configuration

model	C L801T
Lens diameter	Φ 7.5mm	pixel	One megapixels
Probe length	17 MM	Image sensor	1/6inch
Visual Angle	120 Degrees	Depth of field (visual range)	From 10-100 mm
illuminant	8 LED light sources	Observe the direction	Front-end direct view
thermostability	300°	Cooling hole pipe diameter	8mm
Insert tube material	Stainless steel wire woven tube / set pipe	Insert tube length	Standard: 1.0m
Bend Angle (upper / bottom)	180°	Position fixed	One key lock
image resolution ratio	1280*720JPG	Video resolution	1280*720MP4
attended mode	Android or Windows	The Data I / O port	The USB2.0 port is available
Key function	Take photos, turn on the lights	internal storage	computer. Mobile phone storage
brightness control	Manual adjustment, section 3 gear	construction material	Plastic PC case
Product weight	Including packaging equipment: <1.5 kg, bare machine 0.5 kg	white balance	automatic white balance

2. Working environment

System operating temperature	0°C~50°C	ambient humidity	15-90%RH
Video probe operating temperature	0°C~300°C, below 0°C should reduce boot operations	waterproof	The inserted tube and probe can withstand the IP58 waterproof
storage temperature	0°C~60°C	Packaging accessories	hold-all. Clean the bag. Manual et al
working air pressure	6-7kg/cm^2	auxiliary instrument	air compressor

Notes for high temperature detection:
1. In the work, the compressed air can not be interrupted, which will lead to lens damage;

1. Air pressure 6-7kg / cm ^ 2, stop for 5 minutes, cool the lamp before use;

Compressed air pressure: 5.5-6.9bar, clean, dry compressed air cooling effect will be better;