제품 설명
회사 정보
제품 설명
This unit contains one bearing frame, multi-component clamp adapters, one Milling cutter, one heating plate, one Milling cutter/heating plate support, one Electro Hydraulic unit, one tool bag and introduction brochure.
@The KM- 315can weld fittings without the need for any additional equipment: Bends, tees, branches and flange necks can be welded by simply taking the fourth clamp off the machine bodys frame.
@There is independent temperature monitor on the heating plate which complies with international standards.
@Digital pressure measure and display, Has avoided disease that the mechanical pressure gauge at high, the low end measuring range are big error.
@Dragging pressure can be measured and added to the total pressure of welding process
@Electrical equipment complies with IEC60204-1: 1997
@Parameters of pressure, temperature and time can be set and stored for long time. There are English and Chinese languages.
@Digital LCD screen displays pressure, temperature and time normal value and their operating actual value. Digital LCD screen displays the writing prompt in welding process, There are English and Chinese languages
@Flashing lights work as reminder during operation.
@"Manual" and "automobile" are optional of the timer starts the way, while it is set as automobile initially.
@The milling cutter has conveniently, the nimble automatic locking unit. The milling cutter is attached to a Spacing contact switch that it is limited in working area allowable.
@The operating power ranges in 110V, 220V and 240V. Its tolerance is 10, frequency is 50HZ, 60HZ.
1
@Its latest six electrical accidents will be recorded and accidents over power scope will be monitored.
@Temperature sensors of "PT100 OC" and PT100 SC"will alarm and display.
@Heating plate is protected at the maximum temperature to protect PTFE coating
@The time and date will be displayed.
@It is friendly use. Pressure downing, switching and raising can be operated easily.
@Standard clamp adapters: 90\110\160\200\250\315
@clamp adapters arrangement: 125\140\180\225 \280 including bending clamp adapters
@Power: 220V/Single phase/50-60Hz/5500W
@Welding materials: PE\PP\PVDF\PB
@The KM- 315can weld fittings without the need for any additional equipment: Bends, tees, branches and flange necks can be welded by simply taking the fourth clamp off the machine bodys frame.
@There is independent temperature monitor on the heating plate which complies with international standards.
@Digital pressure measure and display, Has avoided disease that the mechanical pressure gauge at high, the low end measuring range are big error.
@Dragging pressure can be measured and added to the total pressure of welding process
@Electrical equipment complies with IEC60204-1: 1997
@Parameters of pressure, temperature and time can be set and stored for long time. There are English and Chinese languages.
@Digital LCD screen displays pressure, temperature and time normal value and their operating actual value. Digital LCD screen displays the writing prompt in welding process, There are English and Chinese languages
@Flashing lights work as reminder during operation.
@"Manual" and "automobile" are optional of the timer starts the way, while it is set as automobile initially.
@The milling cutter has conveniently, the nimble automatic locking unit. The milling cutter is attached to a Spacing contact switch that it is limited in working area allowable.
@The operating power ranges in 110V, 220V and 240V. Its tolerance is 10, frequency is 50HZ, 60HZ.
1
@Its latest six electrical accidents will be recorded and accidents over power scope will be monitored.
@Temperature sensors of "PT100 OC" and PT100 SC"will alarm and display.
@Heating plate is protected at the maximum temperature to protect PTFE coating
@The time and date will be displayed.
@It is friendly use. Pressure downing, switching and raising can be operated easily.
@Standard clamp adapters: 90\110\160\200\250\315
@clamp adapters arrangement: 125\140\180\225 \280 including bending clamp adapters
@Power: 220V/Single phase/50-60Hz/5500W
@Welding materials: PE\PP\PVDF\PB
주소:
29,Xinfeng Road ,Wuxi New District, Wuxi, Jiangsu, China
사업 유형:
제조사/공장
사업 범위:
제조 가공 기계
회사소개:
Wuxi High-Tech 산업 개발 구역에 위치한 Wuxi Weld Technology Co., LTD는 플라스틱 파이프 버트 융접 장비의 연구, 설계 및 제조에 전념하여 완전한 서비스 판매 전, 판매 및 판매 후 서비스를 제공합니다. 이 회사는 창의성을 추구하고 시장 요구 사항을 충족하기 위해 노하우 및 자동기부여 직원으로 구성된 경험 많은 팀을 보유하고 있습니다. 이 회사는 시장에서 첨단 기술의 고성능 버트 융접 장비를 제공합니다. 이 회사는 미래를 결정하는 과학과 기술의 이념에 의해 인도받고 있습니다. "품질 목표는 지속적인 성공을 위해 노력하는 것입니다. "주요 제품은 버트 융접 용접기, 피팅 융접 기계, 밴드 톱입니다. 현재 사용 가능한 모델은 전기 유압식 컨트롤 버트 융접, 자동 버트 융접 기계, 자동 장착 융접 기계, 자동 밴드 톱 입니다.
