기본 정보
제품 설명
Melamine Alu-honeycomb composite panel
Melamine Alu-honeycomb composite panel is a lightweight sandwich panel based on aluminium 'honeycomb' core and skins with weadell melamine board, its principle characteristics are the high mechanical performances, the excellent behaviour against fire, smoke and toxicity (fully compliant with 'Maritime Equipment Directive' (MED) 96/98/EC) and thanks to the use of 'honeycomb' core a very low weight; Due to these characteristics it is particularly suitable for applications in interiors manufacturing in marine, railway and building markets with a finished surface ready to use.
Melamine Alu-honeycomb composite panel is normally supplied with finished melamine board ( one side or both sides ) 3 mm thickness standard HPL from the wide range of colours and finishing from weadell melamine board.
1, Core:
Aluminium materials
Honeycomb density: 2.6 lbs/foot (43 Kg/m) standard production
2.9 lbs/foot (46 Kg/m) standard production
3.6 lbs/foot (59 kg/m) standard production
Honeycomb cell size: Standard: 1/4 "( 6.35mm) 3/8"(9.52mm) 1/2" (12.7mm)
Cell size is depending from the selected density, Other cell size available on request.
2, Skin:
Weadell Melamine board:
Thickness: 3-5mm (standard ) other thickness on request and according to Laminate production
Colour: More than 800 different colours and finishing are selectable from the standard production of melamine baord.
3, Sandwich:
* Dimensions (mm): 1200 x 2400; 1530x 3050 (standards)
* Tolerance on dimensions: ± 5mm
* Flatness: 5mm on 2400 mm
* Thickness: From 5mm to 150mm ± 0.3 mm
* Melamine Alu-honeycomb composite panel (1/4" cell size 3.6 lbs/foot density skin THK: 3mm)
* Total Thickness: 10mm to 50mm;
4, FABRICATION and STORAGE:
Melamine Alu-honeycomb composite panel can be worked with standard tools ( cutting and drilling), taking attention for burrs during cut edges. Before to start further operations over the skins (painting or bonding) particular attention should be taken to clean the panel skins from any dust or grease presence. The panels should always stored in vertical or horizontal ( preferred) position until further reworks; If laminates have to be used to finish the panels, it has to be considered that during its operative life, the panel should not work in areas where different temperature and humidity levels are present on the two faces. Also the 'cut and fold' technique can be applied ( on the raw panel) to produce curved or bended parts.
5, SAFETY:
As on most of materials when cutting operations are done, inhalation and eye contact should be avoid; For this reason, it's strongly recommended use of suitable protective equipment (ear defenders, safety glasses, gloves...). Wash hands immediately after finishing works.
주소:
No. 29 Mingfeng Street, Henglin Town Wujin District, Changzhou, Jiangsu, China
사업 유형:
제조사/공장, 무역 회사
사업 범위:
건축과 장식재료
회사소개:
Changzhou Weadell Decorative Materials Co., Ltd.는 외관과 인테리어 장식을 포함한 다양한 장식용 재료를 판매하고 제조합니다. 주요 제품은 화염 등급 라미네이트, SPC(고체 페놀 코어) 보드, CR(내화학성) 라미네이트, ESD(정전기 방전) HPL, 외벽 클래딩용 알루미늄 패널 등 모든 종류의 HPL(고압 라미네이트)을 포함하고 있습니다. Weadell은 이러한 혁신적인 재료를 파티션 같은 완제품으로 제작하여 마케팅하는 경우에도 마찬가지입니다. 테이블 탑 또는 완성된 실험실용 가구, 병원 수술용 침대, 병원 가구, 의료 장비 등. 실험실과 현대 산업 통제실의 위생 요구 사항을 준수합니다. Weadell은 이러한 특정 물질의 전문 공급업체이며 외관과 내화학성, 내열성, 내화성 및 높은 수준의 내화학성 요구 사항을 충족하는 외관과 미적 표준의 특성을 모두 갖춘 완벽한 제품입니다.