커스터마이징: | 사용 가능 |
---|---|
판매 후 서비스: | 비디오 가이드 설치, 시운전 등 |
보증: | 배송 후 1년 또는 1000시간 |
비즈니스 라이센스가 검증 된 공급 업체
독립적인 제3자 검사 기관의 감사를 받음
404KW 505KVA Diesel Generator Set Specifications | |
Genset model | DB-404GF |
Prime power | 404kW |
505kVA | |
Standby power | 444KW |
556kVA | |
Rated voltage(V) | 400/230 (customizable) |
Rate current(A) | 727A |
Power factor | 0.8 |
Frequency(Hz) | 50 |
Speed(rpm) | 1500 |
Phase: | 3 phase 4 wire |
Noise level: | 105dB at 7m ( open type diesel genset) |
75dB at 7m(silent type diesel genset) |
Type | Dimensions(mm) L*W*H |
Weight(kg) | Base bottom fuel tank (Liter) |
Open Type | 3200×1160x2022 | 3100 | Without |
Silent Type | 4300×1700×2450 | 4500 | 8 hours |
Engine Specification | |
Model | TAD1641GE-B |
Engine output-prime | 430kW |
Engine output-standby | 473kW |
Frequency: | 50Hz |
Speed: | 1500rpm |
Cylinders no. & Type: | 6 cylinders, In Line,4 stroke, diesel engine, water-cooled |
Aspiration: | Turbocharged |
Bore*stroke | 144*165mm |
Displacement | 16.12L |
Compression Ratio | 16.5:1 |
Governor | Electronic speed governor |
Starter motor voltage: | 24V DC |
Type Injection System: | direct injection |
Oil filter | Full flow cartrigde insert filter |
Cooling way | Water Radiator & fan |
Cooling fan | Pusher fan |
Standard Thermostat | 86-96ºC |
Fuel consumption-standby power (100%) | 200g/kwh |
Fuel consumption-prime power (100%) | 199g/kwh |
Fuel consumption-prime power (75%) | 196g/kwh |
Fuel consumption-prime power (50%) | 199g/kwh |
Fuel consumption-prime power (50%) | 216g/kwh |
Alternator | |
Alternator brand optional | Leroy Somer/Marathon/ENGGA |
Rated Voltage(V) | 400/230 |
Output way | 3 phase 4 wire |
Rated power factor | 0.8 |
Exciter | Brushless, Self-exciter |
Wire connecting method | Y type, 3 phase 4 wire |
Max voltage regulation | ±1% |
Protection class | IP23 |
Insulation class | H |
Rotor: | Single/double bearing |
Efficiency: | 95% |
Regulator: | AVR |
Recovery time(Tr) | 1s |
Waveform : TIF | <50 |
Waveform : THF | <2% |
Overload | 110% rated load for 2 hour per 24 hour |
Model:SmartGen HGM6110(optional Deep Sea)
Origin: China
Automatic controller
Operating Environment | |
Operating temperature: | -25ºC~70ºC |
Relative humidity: | 95% |
Operating voltage: | DC24V(range: 8-35V) |
Product Features:
HGM6110 series automatic controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and three "remote" (remote control, remote measure and remote communication). The controller uses LCD display, optional display interface including Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French with easy and reliable operation.
Engine
Heavy duty diesel engine
Four stroke, water cooled
12V and 24V stater and charge alternator
Cooling radiator and fan
Maintenance free battery including ract and cable
Flexible fuel connection hoses and manual oil sump drain valve
Exhaust silencer
Alternator
Brushless, single bearing, flexible disc
Insulation class: H
Protection class: IP23
Self-exciting and Self-regulation
Canopy
All canopy designed with modular principles
All metal canopy parts painted by electrostatic polyester power paint
Soundproof design ensure that the noise level be controlled in small scope
Convenient to lift and move
Easy to maintenance and operate
Base Frame
Base frame including position for forklift and crane
Integral fuel tank
Daily fuel tank continuously supply for 8-24 hours
Fuel tank easy to maintain and clean
Anti-vibration pads are flexed between engine and alternator.
Control, monitor and protect the Generator Set including:
High water temperature
Low oil pressure
Over and under speed
Over current
Under/Over generator voltage
Start and stop failure
Low and high battery voltage
Charge fail
Emergency stop
24h Online Customer Service
Set Type | Prime/Standby (KW) |
Engine No. | Prime/Standby (KW) |
Bore-stroke (mm) |
Number of Cylinder |
Machine oil capacity (L) |
Fuel consumption g/kw·h |
Open type Overall Size (L*W*H)(mm) |
Open type Weight (kg) |
DB-75GF | 68/75 | TAD530GE | 76/83 | 108X130 | 4 | 13 | 213 | 2200*720*1380 | 1050 |
DB-75GF | 68/75 | TAD550GE | 77/85 | 108X130 | 4 | 19 | 212 | 2200*720*1380 | 1050 |
DB-88GF | 80/88 | TAD531GE | 88/96 | 108X130 | 4 | 13 | 218 | 2200*720*1380 | 1200 |
DB-88GF | 80/88 | TAD551GE | 91/100 | 108X130 | 4 | 19 | 218 | 2200*720*1380 | 1200 |
DB-110GF | 100/110 | TAD532GE | 114/124 | 108X130 | 4 | 13 | 218 | 2300*720*1380 | 1250 |
DB-115GF | 105/115 | TAD750GE | 115/127 | 108X130 | 6 | 20 | 219 | 2600*1000*1650 | 1400 |
DB-132GF | 120/132 | TAD731GE | 133/145 | 108X130 | 6 | 17 | 215 | 2600*1000*1650 | 1480 |
DB-132GF | 120/132 | TAD751GE | 133/145 | 108X130 | 6 | 20 | 216 | 2600*1000*1650 | 1480 |
DB-165GF | 150/165 | TAD732GE | 165/179 | 108X130 | 6 | 31 | 213 | 2600*1000*1650 | 1500 |
DB-165GF | 150/165 | TAD752GE | 160/174 | 108X130 | 6 | 31 | 205 | 2600*1000*1650 | 1500 |
DB-176GF | 160/176 | TAD733GE | 179/195 | 108X130 | 6 | 31 | 216 | 2650*1070*1650 | 1550 |
DB-176GF | 160/176 | TAD753GE | 176/191 | 108X130 | 6 | 31 | 205 | 2650*1070*1650 | 1550 |
DB-220GF | 200/220 | TAD734GE | 222/239 | 108X130 | 6 | 24 | 204 | 2650*1070*1650 | 1650 |
DB-220GF | 200/220 | TAD754GE | 220/239 | 108X130 | 6 | 31 | 204 | 2650*1070*1650 | 1650 |
DB-275GF | 250/275 | TAD1341GE | 277/298 | 131X158 | 6 | 30 | 191 | 3000*1100*1750 | 2300 |
DB-275GF | 250/275 | TAD1351GE | 285/306 | 131X158 | 6 | 30 | 200 | 3000*1100*1750 | 2300 |
DB-330GF | 300/330 | TAD1343GE | 331/356 | 131X158 | 6 | 35 | 192 | 3100*1200*1750 | 2900 |
DB-330GF | 300/330 | TAD1352GE | 321/345 | 131X158 | 6 | 30 | 197 | 3100*1200*1750 | 2900 |
DB-330GF | 300/330 | TAD1354GE | 336/361 | 131X158 | 6 | 30 | 196 | 3100*1200*1750 | 2900 |
DB-385GF | 350/385 | TAD1344GE | 362/389 | 131X158 | 6 | 30 | 194 | 3100*1200*1750 | 2950 |
DB-385GF | 350/385 | TAD1355GE | 363/390 | 131X158 | 6 | 30 | 192 | 3100*1200*1750 | 2950 |
DB-396GF | 360/396 | TAD1345GE | 401/431 | 131X158 | 6 | 30 | 196 | 3100*1200*1750 | 2950 |
DB-418GF | 380/418 | TAD1650GE | 407/433 | 144X165 | 6 | 42 | 202 | 3200*1160*2022 | 3000 |
DB-440GF | 400/440 | TAD1641GE | 445/473 | 144X165 | 6 | 42 | 199 | 3200*1160*2022 | 3100 |
DB-440GF | 400/440 | TAD1651GE | 445/473 | 144X165 | 6 | 42 | 198 | 3200*1160*2022 | 3100 |
DB-52GF | 473/520 | TAD1642GE | 521/554 | 144X165 | 6 | 42 | 201 | 3200*1160*2022 | 3200 |
DB-550GF | 500/550 | TWD1652GE | 529/557 | 144X165 | 6 | 42 | 210 | 3200*1160*2022 | 3300 |
DB-550GF | 500/550 | TWD1643GE | 560/596 | 144X165 | 6 | 42 | 199 | 3460*1400*2100 | 3300 |
DB-572GF | 520/572 | TWD1653GE | 573/603 | 144X165 | 6 | 42 | 208 | 3460*1400*2100 | 3400 |
DB-616GF | 560/616 | TWD1645GE | 595/654 | 144X165 | 6 | 42 | 191 | 3460*1400*2100 | 3600 |
Guangxi Dingbo Power Equipment Manufacturing Co., Ltd, founded in 2006, is a manufacturer of diesel generator sets in Guangxi, China. Dingbo Power integrates design, supply, commissioning and maintenance of diesel generator sets and proudly serve our customers for more than 15 years. We are an authorized OEM supplier of diesel engines for generator sets including Cummins, Deutz, Weichai, Yuchai, SDEC, MTU, Ricardo, Wuxi, etc. Our AC generators include Leroy Somer, Marathon, Siemens and Engga and so on. Dingbo Power caters to diverse power needs and we can supply diesel generator sets with power capacity from 20kw to 3000kw.
Dingbo Power company cooperates with many well-known diesel engine companies from reputable brands like Cummins, Deutz, Yuchai, Shangchai, Weichai, Ricardo, MTU, Doosan, etc., and supply reliable diesel generator sets from 25kVA to 3725KVA.
★ FAQ
1.
Q.:What is your warranty period?
A.:Our warranty is 1 year or 1000running hours whichever comes first. But based on some special project, we can extended our warranty period.
2.
Q.:Does your generator have global warranty?
A.:Yes, We supply the warranty.Also most of our products like Deutz,Cummins, Doosan,Yuchai,Weichai etc.power generator enjoy the global warranty service. And the alternator we use like marathon also enjoy the global warranty service, so you do not need to worry about the after-sales service.
3.
Q.:Can you accept OEM?
A.:Yes, we can accept OEM.
4.
Q.:What is your payment terms?
A.:We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight. But based on some special project and special order,we can do something on payment item.
5.
Q.:What is your delivery time?
A.: Our normal delivery time is 2 to 3 weeks. But if your order is using special engine and alternator, then the delivery time is longer.