원유 재활용 증류기를 디젤 오일 정유 공장에 제공합니다

• Voltage: 380V
• Folw Rate: 500-3000 Tons Per Day
• 원료: 원유
• 최종 제품: 가솔린 연료, 디젤 연료, 연료 베이스 오일
• 출력: 85%
• 제어 시스템: DCS 자동 제어 시스템
• 모델 번호.: WR-02
• 표준: 유로 v
• 운송 패키지: Standard Packing
• 사양: as capacity
• 등록상표: WR
• 원산지: China
• 세관코드: 84194090
• 생산 능력: 200 Sets

제품 설명

Composition of units
The unit is composed of heat exchange part, electric desalting part, initial distillation part, atmospheric distillation part, vacuum distillation part
Product scheme
Unit product plan is reforming material(naphtha)-Aviation kerosene-diesel-Wax oil hydrocracking/refining program.
The main products are as follows:
Naphtha--as a catalytic reforming raw material;
First side oil line of atmospheric column--As a raw material for aviation kerosene hydrorefining;
second side oil line of atmospheric column--As a raw material for diesel hydrorefining;
Third side oil line of atmospheric column--As a raw material for diesel hydrorefining;
Vacuum column top line oil--As a raw material for diesel hydrorefining;
Vacuum column first line oil--As a raw material for diesel hydrorefining;
Vacuum column second line oil--As wax oil hydrorefining/cracking raw material;
Vacuum column third line oil--As wax oil hydrorefining/cracking raw material
Vacuum column forth line oil--As wax oil hydrorefining/cracking raw material
Vacuum residual oil--As a raw material of heavy oil catalytic/coking/dissolving/oxidizing asphalt


Second. Raw materials and products

1. Material properties:

The raw material is based on the crude oil data sent by the customer and the evaluation made,The basic properties of raw materials are as follows:

Project analysis	Numerical	ASTM
APIºC	35	CHACT
Density,g/cm^3     15ºC	0.8490	D-5002
Viscosity,mm^2/s,     80ºF	6.864	D-445
Pour point,ºC	-27	D5853
Ash,%	0.0082	D-482
acidity, mgKOH/g
Salt content, PPM NaCl/l	4.0	D-3230
sulfur %Mass	2.3402	D-4294
asphaltene %Mass	1.75	D-6560
Hydrogen sulfide, ppm	7.0	B.P
water %VOL	0.05	D-4007
Characterization factor K
Crude oil category

Real boiling data:

Test standard	ASTM-D86
temperature(ºC)	Yield coefficient(%)
L B P(47)
50	0.1
75	3.8
100	8.5
125	14.5
150	20.0
175	26.0
200	31.5
225	36.5
250	41.0
275	45.0
300	49.0
Total yield	50
loss	0.5

(The above information is provided by the customer, the whole data is not comprehensive, requiring additional data later)
 

1. Product and by-product summary (according to the raw materials,the boiling range not more than 300ºC, the vacuum line will not mark)

No.	Materials name	The main specifications	output	Method of transportation and destination
			100%
1	Gas + loss		0.3	Pipeline transport to catalyze compressor inlet
2	Sump oil		0.34	Pipeline transportation, to the base oil pump inlet or dirty oil tank area
3	naphtha		20	Pipeline transport, to tank farm or reforming plant
4	Atmospheric column second line oil		10	Pipe transport to tank farm or aviation kerosene hydrogenation unit
5	Atmospheric column first line oil		6	Pipeline transport, go to tank farm or diesel hydrogenation unit
6	Atmospheric column third line oil		13.36	Pipeline transport, go to tank farm or diesel hydrogenation unit
7	Vacuum column first line oil		/	Pipeline transport, go to tank farm or diesel hydrogenation unit
8	Vacuum column second line oil		/	Pipeline transport, go to tank farm or diesel hydrogenation unit
9	Vacuum column third line oil		/	Pipeline transportation, tank removal or hydrocracking/refining units
10	Vacuum column forth line oil		/	Pipeline transport, to tank farm or hydrogenation/refining unit
11	Vacuum residual oil		/	Pipeline transport, re-catalytic/coking/dissolving/bitumen units

Wonrong Environmental Protection Technology Co., Ltd, is occupied in Petroleum refining, Pro-Environment, Chemical Technical Application, Technical Research and Development of the Project. Project design Equipment manufacturing and sales. The company has deep cooperation with Sinopec Shanghai Research Institute, and Nanjing Chemical Research Institute. Technology has always had a leading advantage in the industry. The company latest research and development of oil-gas phase directed catalytic cracking of waste engine oil regeneration technology, completed from the design, research and development volume output qualified diesel products.

Tire oil-gas phase catalytic separation of gasoline and diesel products all meet the national requirements of oil products. New type Thin film + fractional distillation refining and regenerating base oil technology of Carclazyte, New type Thin film + fractional distillation + NMP refining and regenerating base oil technology, the products has reached the international API standards.

The company is committed to Technology First, Quality First principle. Process calculation, equipment calculation and simulation test are carried out for each set of the technology and equipment. The design software used included: Aspen,Pro2,HTRI, HExtran, SW-6, CAD, Plant 3D.