자동 휴대용 소형 테이프 랩 케이블 기계 전기 배선 와이어 하니스 테이핑 장비

• After-sales Service: 1 Year
• 구동 유형: 전기 같은
• 조건: 새로운
• 인증: CE
• 보증: 12 개월
• 자동 급: 오토매틱
• 모델 번호.: SR-303B
• 포장 기계 크기(배터리 제외): 110mm * 160mm * 360mm, 1kg
• 데스크탑 기본 크기: 250mm * 300mm * 280mm, 4kg
• 배터리: 6000mh 리튬 배터리, 10-21v-4.0a
• 배터리 방전 시간: 약 5-6시간
• 래핑 속도: 150-500rpm
• 해당 테이프: PVC, 나일론, 직물 베이스 접착 테이프 등
• 테이프 유형: 표준
• 적용 가능한 와이어 직경: 3mm - 35mm
• 운송 패키지: Carton Case
• 사양: 110mm*160mm*360mm, 1KG
• 등록상표: sinrad
• 원산지: China
• 생산 능력: 1000

제품 설명

Automatic Tape Wrapping Machine Desktop Support Handheld

1.Full winding: The entire wiring harness is covered with adhesive tape, and the area of the adhesive tape is adjustable. 2.Dot wrapping: Tape is wound around one point of the wire harness according to the number of turns, and the number of winding turns can be set to one, two or more. 3.Flower entanglement: When tape is wrapped around the wire harness, it is not overlapped, and it is separated by a distance. The interval distance can be adjusted.

Technical Index	Tech-Parameters
Support wire diameter	3- 35mm
Tape width	9-25mm
Applicable tapes	flannelette, acrylic tape, electrical tape, Acetate tape (no release paper)
Tape inner hole size	Ф38, Other sizes can be customized
Handheld wrapping speed	1-4 gear.  150, 200,350, 500 turns/min
Desktop wrapping speed	adjust speed by button + -
OD max	less 110mm
Lithium battery	6000mh, 10-21V-4.0A
Power adapter	24v, 3A,  5.5*2.1
Foot switch	with pedal
Weight of machine and battery	About 1.6KG
Machine Dimensions(L*W*H)	110*160*360mm
packing size	450*280*110mm
Packing Weight	4 Kg

OI (operating instructions)
1. Buttons description
1)Brake button: When the brake button is in the pressed state, and the blue light is always on. If you cancel the brake, you need to touch the brake button lightly.
2)Speed adjust button "-" : decrease the winding speed. The speed is 5 levels. The speed can be adjusted according to actual operation and production requirements.
3)Speed adjust button "+" : increase the winding speed.
4)Power switch: Press power switch, the machine is in standby state, the green light is always on.
Mode1: Double-click the switch button to start running, release it and click again to stop running.
Mode 2: Click the switch button to start running, release it to stop.

5)Start/Stop switch 6)Power adapter pinhole
7)6000MH lithium battery pin
8)Foot switch pinhole

When the machine is in standby and the green light is always on, double-click the (5) switch button to start running. When the switch button is pressed again, the flywheel will buffer for one circle and stop working. The machine is in standby state. If you manually turn the flywheel, you need to press the (1) brake switch. Press the button and turn it when the blue and green lights are always on.
2.Brief introduction of transmission part
1)Flywheel
2)C-shaped blade seat fixing plate
3)blade seat
4)Tape Wheel
5)Roller
6)Tape wheel fixing plate

There is a hidden blade in the blade seat, which can effectively prevent the operator from being injured by accidental touch. The tape wheel (4) is used to install the tape, which is passed through (5) roller and (2) the blade seat fixing plate and placed on the blade seat.

The movement process of the transmission part: (6) The tape wheel fixing plate is fastened on the (1) flywheel, and the rotary motion of the motor during operation forms a rotary motion with the center of the flywheel as the center of rotation through the gears in the transmission part. Note: Do not touch the tape wheel when working, and always keep a safe distance of more than 60cm from the tape wheel.
3.Maintainance
Grease needs to be added regularly to keep the machine running smoothly.
Note:
A. Please turn off the power switch when injecting.
B. Injection interval 2ml/month.
4.Desktop base installation
There is the optional desktop base. (Additional purchase required.)

Application:

Other handheld tape wrapping machine
More detail contact

filix@customizemachine