Usage:
This machine is specialist for horizontal and vertical cutting paper rolling materials to special to A4 size etc .it can be with 1 roll, or 2rolls, or 4 rolls and 5 rolls etc
Main Technical Parameters
| Model |
RYHM-1-A4 |
|
| Sheeting Unit |
|
| Unwinding Paper Reels |
1 |
|
| Number of Pocket |
4 |
|
| Max. Width of Paper Roll |
846mm |
|
| Net Cutting Width |
840mm |
|
| Diameter of Paper Roll |
400-1200mm |
|
| Diameter of Core Chuck |
3"(76.2mm) or 6"(152.4mm) |
|
| Paper GSM |
60-100gsm |
|
| Length of Sheeted Paper |
297mm |
|
| Paper Quantity per Ream |
0-500pcs |
|
| Max. Ream Height |
65mm |
|
| Max. Design speed of paper running |
250-350m/min |
|
| Working Speed of paper feeding |
1000m/min |
|
| Ream Discharging speed |
6--8reams/min |
|
| Max. Knife Loading |
437 (4×100)gsm |
|
| Paper cutting accuracy |
±0.2mm |
|
| Requirement for paper Reel |
1.Stable Speed
2. Paper roll with no breakage
3. Qualified paper . |
|
| Transmission |
AC Frequency conversion, stepless speed regulating |
|
| Main power source |
380v/50Hz 3phase 4 wires |
|
| Control voltage |
220V AC/22V DC |
|
| Total Power |
20kw |
| Overall dimension (LxWx H) |
13mx2.75mx2.1m |
| Weight |
8T |
| Wrapping Unit |
|
| Production Speed |
6--8reams/min |
| Motor power |
6.5KW |
|
| Gluing power |
2.25KW |
| Compressed air |
0.6-0.8Mpa |
|
| Overwrapping Paper size(L ×W) |
550-560×386mm |
|
| Overall dimension (LxWx H) |
3.4mx3.3mx1.6m |
| Weight |
1.5Ton |
Performance and Characteristics:
1. Non-shaft paper rising shelves of the ground controlling system------ Two sets
2. Advanced tension controlling system ------ Four sets.
3.Four sets of anti-warping mechanisms------Four sets.
4. Longitudinal cutting knife groups------Five sets.
5. Simultaneous cross-cutting knife groups-----One set.
6. High-speed paper feeding system----- One sets
7. Low-speed paper feeding system----- One sets
8. Waste paper automatically discharging system-----One set.
9. Making papers in order of 2D oscillation, srew rod lifting device of paper reams collecting system------One set.
10. PLC reams of paper counting device------One set.
11. Paper reams longitudinally and transverse discharging equipment-----One set.
12. PLC error alarm machine haulting system and PLC controlling equipment ------One set.
13.Conveying belt------One set.
14.Paper separator by cam rising------One set.
15. Paper splicer by cam rising------One set.
Automatic tension control system
1) When the paper through inductor, that automatic feedback to the PLC control system to increase brake load, increase or reduce the tension that control the paper tension automatically.
High precision cutting knife system
1) Upper and lower knives are rotary make the cutting accuracy is very precision.
2) Anti-curve device Include one set of square bar and steelwheel. When the curve paper through paper edge unit that can adjust the paper square and let it flat.
3) 5 sets slitting knivesUpper slitting knife take by air pressure and spring. Lower knife connect with bear drive(the diameter is Ф180mm ) and move with spring. The upper and lower round knife is made by SKH.The lower slitting knife (diameter is Ф200mm) and drive with in-phase belts. The lower slitting knife is 5 groups, each group have two knife edge.
Paper feeding wheel
| Upper wheel |
Ф200*550mm (rubber covered) |
|
| Lower wheel |
Ф400*550mm (anti-glide) |
| Cutting knife group |
| Upper cutting knife |
1 sets 550mm |
| Lower cutting knife |
1 sets 550mm |
Transporting System
1) Transporting by level and overlapping device
2) High speed transporting belt and press wheel. Upper and lower transport belt corresponding pressure paper, automatic tension and close system.
3) Static removal device(Include static removal bar and Negative ion generator)
Paper collecting system
1) Automatic device for paper stack up and down
2) Jogging device and clap paper tidy. Control by air vat, when design sheet, the cylinder up and down by cut paper bar. After transport paper to belt, transport to the pack table cross.
감사를 받은 공급업체 
Usage:
