기본 정보
특징
내유성, 산 및 알칼리 저항, 눈물 저항하는, 내열, 내한, 마모
Thickness of Top Rubber
3.0 mm ~ 8.0 mm
Thickness of Bottom Rubber
1.5 mm ~ 4.0 mm
Elongation at Break
350% ~ 400%
Abrasion Loss
90 mm3 ~ 200 mm3
Strength
100 N/mm ~ 4000 N/mm
Model Number
GB, DIN, as, Cema, ASTM, Ash
Place of Origin
Anhui, China
사양
ISO, DIN, AS, GB, CEMA, ASTM, SHA
제품 설명
Construction:
Pipe conveyor belt takes high-strength canvas or steel cable as its carcass in combination with high-strength high abrasion-resistance high-quality rubber as the top and bottom rubber cover, during the operation.
Features:
(1) Pipe belt itself has appropriate transverse rigidness, which can ensure good retention and seal of tubular shape.
(2) The belt body has good elasticity and longitudinal flexibility, making the belt able to tolerate repeated and long-time violent bending and shrinkage;
(3) The belt has excellent physical and mechanical properties. It is required that the outer cover rubber has higher resistance to weather, ozone, ultraviolet rays, flexure, cracking etc., while inner cover rubber should have excellent abrasion resistance.
(4) Because of special structure of tubular belt, it conveys powdery material in tubular closed condition during the conveying, thus it can effectively prevent dust fly and spill.
(5) By adopting tubular conveyor belt for conveying, the material is wrapped in the rubber belt, this increasing the area of contact between material and rubber belt and internal friction angle of material, thus can increase the inclination angle of material conveying of the conveyor.
(6) With tubular belt adopted for conveying, after the belt presents tubular shape, it can run horizontally, vertically or curvilinearly, the conveying line can be arranged according to the space within a certain range without setting intermediate transfer station, therefore, construction investment can be saved.
(7) Tubular belt conveying avoids bias with reliable running, improved conveying efficiency and better economic benefit and lower running cost.
(8) With tubular belt for conveying material, the return run after discharge can also convey material, i.e. two-way conveying. This can not be achieved with ordinary conveyor belt.
Application:
It is widely applied in enclosed conveying of bulk materials in the sectors as of metallurgy, electric power, chemical engineering, harbor, wharf, building materials, coal, mine, grains etc. It has multiple types such as abrasion-resistant, heat-resistant, cold-resistant, corrosion-resistant, flame-resistant, antistatic etc.
Specification series
(mm) Tube diameter | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 500 | 600 | 700 |
(mm) Belt width | 360 | 600 | 800 | 1000 | 1100 | 1300 | 1600 | 1850 | 2250 | 2450 |
(m2) Sectional area | 0.008 | 0.018 | 0.031 | 0.053 | 0.064 | 0.09 | 1.147 | 0.21 | 0.291 | 0.379 |
(mm) Max lump size | 30 | 30-50 | 50-70 | 70-90 | 90-100 | 100-120 | 120-150 | 150-200 | 200-250 | 250-300 |
Marking of pipe belt with textile carcass
100 | 1000 | NN | 4 | 800 | 4+2+2 | 18 |
Length (m) | Width (mm) | Carcass material | Number of belt cord plies | Longitudinal tensile strength over full thickness (mm) | Thickness of top and bottom rubber cover and transition layer (mm) | Performance of cover (MPa) |
Marking of steel cord pipe belt
1000 | ST | 800 | 5+5 | M |
Width (mm) | Material code of belt cord | Longitudinal tensile strength over full thickness | Thickness of top and bottom rubber cover (mm) | Grade code of cover performance |
Specifications and technical parameters of tubular conveyor belt with nylon canvas carcass
mm Tube diameter | mm Width | N/mm Tear strength | Number of fabric plies | Model of Fabric | ×mmThickness of cover rubber Inner × outer | mm Total thickness |
100 | 430 | 250 | 1 | NN-300 | 3.0x1.5 | 5.2 |
150 | 600 | 160 | 2 | NN-100 | 3.0x2.0 | 7.5 |
315 | NN-200 |
200 | 750 | 315 | 2 | NN-200 | 3.0x2.0 | 7.9 |
500 | NN-300 |
315 | NN-200 | 5.0x2.0 | 9.4 |
500 | NN-300 | 8.9 |
250 | 1000 | 400 | 2 | NN-250 | 3.0x2.0 | 8.6 |
500 | NN-300 | 9 |
400 | NN-250 | 5.0x2.0 | 10.1 |
500 | NN-300 | 10.4 |
300 | 1100 | 400 | 2 | NN-250 | 3.0x2.0 | 9.1 |
500 | NN-300 | 9.5 |
400 | NN-250 | 5.0x2.0 | 10.6 |
500 | NN-300 | 11 |
350 | 1300 | 630 | 3 | NN-250 | 5.0x2.0 | 11.9 |
800 | 4 | NN-300 | 12.5 |
400 | 1600 | 800 | 4 | NN-250 | 5.0x2.0 | 13.1 |
1000 | 5 | NN-300 | 13.9 |
Recommended min. roller diameter of conveyor (Pipe conveyor belt with nylon canvas carcass)
Number of plies
Roller diameter Model | 2 | 3 | 4 | 5 |
NN-100 | 200 | 250 | 315 | 400 |
NN-200 | 250 | 315 | 400 | 500 |
NN-250 | 315 | 400 | 500 | 630 |
NN-300 | 400 | 500 | 600 | 800 |
Specification parameters of steel wire tubular conveyor belt
Item Strength specification | St 630 | St 800 | St 1000 | St 1250 | St 1600 | St 2000 | St 2500 | St 2800 | St 3150 | St 3500 | St 4000 | St 4500 | St 5000 | St 5400 |
N/mm Longitudinal tensile strength | 630 | 800 | 1000 | 1250 | 1600 | 2000 | 2500 | 2800 | 3150 | 3500 | 4000 | 4500 | 5000 | 5400 |
mm Max. nominal diameter of steel cable (mm) | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 6.0 | 7.5 | 7.6 | 8.1 | 8.6 | 8.9 | 9.7 | 10.9 | 11.3 |
±1.5mm Space between steel cables | 10 | 10 | 12 | 12 | 12 | 12 | 15 | 15 | 15 | 15 | 15 | 16 | 17 | 17 |
mm Thickness of top rubber cover | 5 | 5 | 6 | 6 | 6 | 8 | 8 | 8 | 10 | 10 | 10 | 10 | 10 | 10 |
mm Thickness of bottom rubber cover | 5 | 5 | 6 | 6 | 6 | 6 | 6 | 8 | 8 | 8 | 10 | 10 | 10 | 10 |
mm Thickness of intermediate layer for rigidness adjustment | Transverse rigidness value is provided by the customer, and our company prepare the corresponding intermediate rigidness adjustment layer according to his need, the thickness of adjusting layer is 3~6mm. |
mm Tube diameter | mm Width | Number of steel cables |
200 | 800 | 75 | 75 | 63 | 63 | 63 | 63 | 50 | 50 | 50 | 50 | -- | -- | -- | -- |
250 | 1000 | 95 | 95 | 79 | 79 | 79 | 79 | 64 | 64 | 64 | 64 | 64 | 59 | 55 | 55 |
300 | 1100 | 105 | 105 | 87 | 87 | 87 | 87 | 69 | 69 | 69 | 69 | 69 | 65 | 61 | 61 |
350 | 1300 | 124 | 124 | 103 | 103 | 103 | 103 | 83 | 83 | 83 | 83 | 83 | 77 | 72 | 72 |
400 | 1600 | 151 | 151 | 126 | 126 | 126 | 126 | 101 | 101 | 101 | 101 | 101 | 96 | 90 | 90 |
500 | 1850 | 177 | 177 | 147 | 147 | 147 | 147 | 119 | 119 | 119 | 119 | 119 | 111 | 104 | 104 |
600 | 2250 | -- | -- | 181 | 181 | 181 | 181 | 145 | 145 | 145 | 145 | 145 | 137 | 125 | 125 |
700 | 2450 | -- | -- | 197 | 197 | 197 | 197 | 158 | 158 | 158 | 158 | 158 | 148 | 139 | 139 |
Recommended min. roller diameter of conveyor (steel cord pipe conveyor belt)
Type of belt | St 630 | St 800 | St 1000 | St 1250 | St 1600 | St 2000 | St 2500 | St 2800 | St 3150 | St 3500 | St 4000 | St 4500 | St 5000 | St 5400 |
mm Min. roller diameter | 500 | 630 | 630 | 800 | 800 | 1000 | 1250 | 1250 | 1250 | 1250 | 1400 | 1600 | 1600 | 1800 |
주소:
No.999 Tongan South Road, Tongcheng, Hefei, Anhui, China
사업 유형:
제조사/공장, 그룹사
사업 범위:
건축과 장식재료, 공업 설비와 부품, 교통 운송, 야금광산물과 에너지, 제조 가공 기계
경영시스템 인증:
ISO 9001
회사소개:
안후이 판덩이 주식회사는 총 자본금 106000000USD(등록 자본 58000000USD)를 가진 1974년부터 설립된 안후이 판덩이 그룹의 계열사로 463500m2의 규모로 1,000명 이상의 직원을 보유하고 있습니다. ′PANDENG′, ′OUNA′, ′KINSON′이라는 유명 브랜드를 3개 보유하고 있습니다.
벨트 컨베이어, 파이프 컨베이어, 버킷 엘리베이터, 나사 컨베이어 등의 대량 자재 처리 시스템을 개발, 설계, 제조하는 데 전문화되어 있습니다. 컨베이어 롤러, 아이들러, 풀리, 유압 커플링, 백스톱, 다양한 종류의 컨베이어 벨트 등 컨베이어와 관련된 거의 모든 제품 광업, 금속 공학, 발전, 난방, 항만, 곡물, 화학 등 산업
저희 그룹은 5개의 자회사를 두고 있으며 100개 이상의 특허를 보유하고 있습니다. 2개의 하위 회사가 ISO9001:2008 품질 관리 시스템 인증, MA 인증 기업, 중국 중장비 산업 협회 회원, Bank AAA 신용등급 기업, 중국 10대 운송 기계 산업 등을 획득했습니다. 40년 동안 우리는 Sinopec, CNPC, APP, Shenhua group CORP와 같은 많은 글로벌 500개 기업을 지원했습니다. SGCC, Conch Group, CHALCO, Baosteel 등
. 전문적인 디자인, Anhui Pandeng Group의 개발, 설치 및 시운전, 서비스 후 덕분에 중국의 유명한 대량 자재 처리 시스템 선도 자리를 차지하게 되었습니다. 또한 베이징 리프팅 운반 기계 설계 및 연구 기관을 비롯한 30여 개의 설계 및 연구 기관과의 안정적이고 좋은 협력 관계를 구축했습니다.
안후이 판청 그룹을 방문해 주셔서 감사합니다!