기본 정보
제품 설명
Battery Feature
Stable quality & high reliability
Sealed construction
Environmentally Friendly
Maintenance-free operation
Low pressure venting system
Heavy duty grid
Low self discharge
Nanoscale gel material and patented gel electrolyte imported from germany
Transormal design and service life is more than eight years.
Safety valve adopts improved rubber cap,thus it has the characteristics of high precision discharge pressure and aging resistance.
CW-M-109 sealant shall be adopted and it has the characteristics of excellent mechanical strength and anti-corrosion.
Consistence of performance of battery is stable and inner resistance is small
Modified superfine glass fiber separator shall be adopted and advantages are high purity,small inner resistance,and high content of fiber. The composite gas rate up to 99%.
Excellent performance of battery in low temperature and superiority in consistence and stability.
Lead Acid Battery Structure and Characteristic
1. Lead-Calcium six alloy sheet grating and coated mounding plate electrode: Big capacity and long life.
2. Lead-Tin multiple alloy bus bars: Small internal Resistance, corrosion resistance and can stand long term floating charging.
3. Advanced AGM septum: Absorbs optimum electrolytic without leaving dissociated liquid, full air cathode absorption and can be placed in any position.
4. ABS Engineering plastics shell: Firm and weather resistant.
5. Silicon-Fluorin rubber sealed safety cap: Safe and flameproof without leakage of corrosive gas and liquid.
6. Copper Plating Silver terminals: Small contact electrical resistance and rustproof.
7. Pure electrolyte analysis: Low self-discharging.
8. Negative absorption type hermetically-sealed construction: No need to add distilled water and electrolyte by compounding accumulator gas into water without any maintenance.
9. Comprehensive Line-Up.
10. Economical
11. Maintenance Free
12. Deep Discharge Recovery
13. Suitable For Multiple Application
General Application
UPS
Power Tools
Medical Equipments
Solar Energy System
Electric Powered Vehicles
Electric Powered Toys
Control System
Vacuum Cleaners
Golf Cars and Buggies
Electric Wheel Chairs
Solar & Wind Power Generation Systems
Signal System & Emergency Lighting Systems
Alarm system, Security system
EPS power supply
Signal System & Emergency Lighting Systems
General Features
Sealed and maintenance free operation
Non-Spillable construction design.
Safety valve installation for explosion proof.
High quality and high reliability.
Low self discharge characteristic.
Flexibility design for multiple install positions.
Exceptional deep discharge recovery performance.
ABS containers and covers(UL94HB, UL94V-0) optional.
Battery Structure:
Component | Positive plate | Negative plate | Container | Safety valve | Terminal | Separator | Electrolyte |
Raw Material | Lead dioxide | Lead | ABS | Rubber | Copper | Fiberglass | Sulfuric acid |
Construction
Component ...Raw material
Sealant .....Epoxy Resin
Positive .....Lead dioxide
Safety valve ..EPDR
Negative .....Lead
Container .....ABS
Separator .....Fiber glass
Cover .....ABS
Electrolyte ....Sulfuric acid
Terminal ........Pb Alloy
FAQ
1. What is the definition of "cycle use" and "standby use"?
"Cycle Use" - direct power source:
Cycle Use It can provide the power supply to power tools, and portable electronic products. It can also be used for cycling charging and discharging usage such as electronics motorbike or vacuum cleaner.
"Standby Use" - back up power:
Standby Use is mainly used for emergency power to avoid future damage that may be caused by a sudden power outage.
2. What are the concerns when using OLITER batteries in a parallel or a serial series?
1. Do not mix brands, models and date codes?
2. No separate discharge then charging in a serial configuration.
3. Under parallel usage, pay close attention to the differences in voltage in each circuit.
4. If the difference in voltage in each circuit is too high, do not charge/discharge as parallel.
5. The environment of all circuits must be similar.
3. How can you check a battery's performance?
Different usage applications will use different methods for evaluating a battery's performance. Using a 20 hour rate or the 10 hour rate, you can use 0.05CA or 0.1CA to discharge the battery until the battery reaches a terminal voltage of 10.25 volts. You can then calculate the amp hours to see if the battery fits the specifications or not. For a 5 minutes rate, such as the HC1221W, you can use a 21 watts/cell discharge till the terminal voltage reaches a terminal voltage of 9.6 volts and then measure the discharge time to see if it meets the final specifications or not.
4. How can the conversion be made between "watts (W)" and "amp hours (Ah)"?
W=I x V = 4I (15 minute rate) = 2CV = 2V
(Ex. HC1217W = 17/4 = 4.25Ah)
5. When should a deep-cycle battery be used?
Deep cycle batteries are used when 50% or more of the capacity is used per cycle.
The most common use of deepcycle batteries is in applications that require deep, repetitive drain, like powerful car audio systems, trolling motors, golf carts, electric wheelchairs, or RV house power sources. Public safety and high-performance vehicles are other applications that call for the special characteristics of deep-cycle batteries.
6. Does the deep-cycle battery have a "memory"?
No. The performance of deep-cycle batteries will be reduced over time, but deep-cycle batteries do not suffer from "memory effect" such as NiCd batteries do.
7. How are batteries rated?
Lead acid batteries are rated based on a capacity given in a defined time. There is not a set industry standard for how to rate a battery.
8. How long can a battery last?
The service design life of a battery varies considerably with how it is used, how it is maintained and charged, temperature, among other factors.
9. Do I need to add water to my battery?
No. Sealed lead acid batteries do not require the use of water.
10. What determines the life of a VRLA battery?
Sealed lead acid battery life is determined by many factors. These include temperature, depth and rate of discharge, and the number of charges and discharges (called cycles)
주소:
No. 88 North Beihuan Road, Gaoyou Economic Development Zone, Yangzhou, Jiangsu, China
사업 유형:
제조사/공장
사업 범위:
야금광산물과 에너지, 전기전자, 조명
경영시스템 인증:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
회사소개:
OL Group의 회원사인 Jiangsu Energy Technology Co., Ltd는 1998년에 120평 규모로 설립되었으며, 매년 920만 kvah에 이릅니다. 수년 동안 oliter는 VRLA
OL의 R&D, 생산, 마케팅 및 응용 분야의 통합에 중점을 두고 있으며, 7개의 시리즈를 달성했으며, 100개 이상의 배터리 모델을 달성했습니다. 오리이는 장쑤 북부 지역에서 태양열 에너지 저장 배터리 생산 기지로 가장 큰 부상했습니다.
오리터 제품은 태양열 가로등, 정원등, 잔디 램프, 태양풍 보완 램프, 망원 통신, PV 발전소, 독립 발전 시스템 등 도로 조명 분야에서 널리 사용되고 있습니다. 연간 매출이 두 배로 증가함에 따라 OL은 중국 배터리 업계의 선두 주자가 되고자 합니다.
기술, 제조, 설치 및 테스트를 담당하는 전문 엔지니어 그룹이 있으므로 고품질 장비를 기반으로 우수한 성능을 제공할 수 있습니다. 24시간 내에 다양한 요청에 대한 완벽한 서비스와 기술 컨설팅을 고객에게 제공할 수 있습니다. Jiangsu OL은 최상의 솔루션을 통해 최고의 배터리를 제공하고, 국내외 기업과 고객 모두를 위한 가교 및 창구로서 자사를 구축하고 싶습니다.
우리 제품은 파키스탄, 우간다, 이탈리아, 독일 등 60개국 이상에 수출되어 루마니아, 두바이, 러시아, 루마니아, 사우디 아라비아, 시리아, 요르단, 미국 E., 인도네시아, 태국, 인도, 남아프리카, 이집트, 나이지리아, 케냐 등
우리는 우리가 협력의 합의에 다다다다다다다다다다다다면서는 쌍방이 윈-윈(win-win) 상황을 만들 수 있다고 믿습니다. "우리는 함께 서서, 분열된 우리"는 우리의 파트너를 대우하는 것입니다. 전 세계의 고객들은 저희와 함께 사업 관계를 구축하고, 협력하고, 발전시키는 것을 따뜻하게 환영해 줍니다. 자세한 내용은 저희에게 문의해 주십시오.