자동 용접 장비 일반 선삭 롤 용접 회전장치

• 유형: 닝 롤 용​​접
• 구조: 플랫폼
• Rotaion 속도: 0.05-0.5rpm
• 전압: 110V / 220V
• 롤스 유형 선반 용접: 조정
• 조건: 새로운
• 모델 번호.: KTG-60
• 모델: Ktg-60
• 최대 적재 중량: 60톤
• 적합한 파이프 직경: 750-4,800mm
• 고무 롤러 직경: 440mm
• 롤러 선형 속도: 분당 100-1000mm
• 리드 타임: 5일
• 색상: 사용자 지정
• 보증: 1년
• 휠 수량: 4륜
• 휠 소재: 폴리우레탄 및 강철 휠 회전장치
• 조절 가능한 방법: 나사 조절식 용접 회전장치
• 지불: T/t l/c
• 구동 모터: 4kW * 2
• 활성 회전 장치 크기: 1,410 * 880 * 6,50mm
• 구동 회전 장치 크기: 1310 * 680 * 450mm
• 운송 패키지: Wooden Box
• 사양: 사용자 지정
• 등록상표: Lemar
• 원산지: Wuxi, China
• 세관코드: 8428909090
• 생산 능력: 10000 PCS/Year

제품 설명

Automatic welding machine Conventional turning rolls welding rotators
The standard rotating roll rotators consist of a driver wheels and a freewheeling companion idler wheels.
The workpiece is supported at one end by the driver, who also gives it rotary motion.
The idler set only serves to sustain the rotating other end of the workpiece.
Each driver and idler roll has separate load ratings and capacities.
Various materials for Turning Roll Wheels:
Rubber wheel Rotator
Steel wheel Rotator
Polyurethane wheel Rotators
etc.

Specifications:

Model	Loading Capacity  (kg)	Pipe/Tank Diameter  (mm)	Rubber Roller Dia. & Width (mm)		Roller Speed  (m/h)	Motor Power  (kw)	Speed Adjust
			Rubber Roller	Steel Roller
KTG-5	5000	Φ250-2800	Φ250*100	Φ240*20*2	6-60	0.75	Variable Frequency Drive (VFD)
KTG-10	10000	Φ320-2800	Φ300*120	Φ290*25*2		1.1
KTG-20	20000	Φ500-3500	Φ350*120	Φ340*30*2		1.5
KTG-30	30000	Φ600-3800	Φ350*120	Φ340*30*2		2.2
KTG-40	40000	Φ600-4200	Φ400*120	Φ390*40*2		3
KTG-50	50000	Φ700-4500	Φ400*120	Φ390*40*2		4
KTG-60	60000	Φ750-4800	Φ450*120	Φ440*50*2		4
KTG-80	80000	Φ850-5000	Φ500*120	Φ490*60*2		5.5
KTG-100	100000	Φ1000-5500	Φ500*120	Φ490*70*2		7.5
KTG-150	150000	Φ1100-6000	Φ500*120	Φ600*Φ280		2*5.5
KTG-250	250000	Φ1200-7000	/	Φ700*380		2*5.5
KTG-500	500000	Φ1800-8000	/	Φ850*350		2*7.5

How to use Automatic welding rotators turning rolls correctly?
1. In order to ensure the performance of the adjustable and self aligning welding rotator, all transmission parts should be regularly or irregularly lubricated and inspected, and the cycloid reducer must be inspected every month to replenish the lubricating oil.
2. The working principle of Welding turning rolls is to use friction to do work. All transmission parts are not lubricated and are strictly prohibited to use.
3. Before restarting the long-term sealed roller frame, the grease must be replaced to avoid damage to the machine.
4. During use, the rollers are in contact with the weldment, and the weld seam or sharp parts are strictly prohibited from touching the rollers, so as not to damage the rollers.
5. When hoisting and placing workpieces, it is strictly forbidden to hit the rollers vigorously to prevent damage to the rollers or other components. When the equipment is not fixed, a strong impact may cause the equipment to overturn.
6. When welding turning rolls are used for small-diameter cylinders, if there is axial movement of the cylinder, the adjusting bolts under the arc-shaped plate can be adjusted to adjust the lifting position of the rollers to ensure that the working position of the cylinder is in a proper state .