중간 전압 전기 전력선 재질 27kv 5ka 10ka 금속 산화실리콘 서지 방지기

• 신청: 강력한
• 자료: 복합 폴리머
• 구조: 애자를 게시
• 유형: 유형 애자
• 용법: 고전압 송전, 절연, 전기 설치
• 베어링 용량의 크기: 160KN
• 모델 번호.: 19-24
• 인증: ISO9001
• 색: Red or Customer Required
• 상표: Hualian Torch
• OEM 생산: OEM
• 정격 전압: 15kV
• 전압: 고전압 포스트 절연체
• 샘플: 샘플 제공 가능
• 운송 패키지: Export Wooden Package
• 사양: Customized Size
• 등록상표: Hualian Torch
• 원산지: Liling China
• 세관코드: 85469000
• 생산 능력: 50000 PC of a Year

제품 설명

Hunan Hualian Torch Porcelain insulator & Electrical apparatus Co. Ltd, is Leading manufacturer of China porcelain insulator industry and electrical industry.
* with 66 years's glorious history.
* The permanent member of National Electrical Porcelain Industry Association.
* One of national top five electrical porcelain manufacturers.
* factory covers an area of 190,000 square meters, with building area of 92000 square meters.

 

Dimension&Property

Medium Voltage Electric Power Line Material 27kV 5kA 10kA Metal Oxide Silicone Surge Arrester

 

1. About Surge Arrester 

YONGDE Surge Arresters can be applied to a variety of systems including substation equipment,

railway power system and power distribution units ranging from 0.28kV to 500kV systems.
These surge arresters demonstrate excellent protection properties. Our surge arresters incorporate

non-linear resistor ZnO elements with superior non-linear current- voltage characteristics,

high quality and reliability. Metal oxide type surge arresters offer such special features
inherent in the gapless structure, such as a quick response to surge voltage,

high energy dissipation capability, safe operation, compactness / lightweight and freedom from pollution.

 

0.28~500 KV Product's Characteristics: 
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, 

with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size 

and light in weight. 

2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large

in flow capacity.

3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops,

the product can be applied to the complete cabinet installation, 

which can reduce the designing size of cabinet. 

4. Products with detachment device can provide signals for quitting operation when failure occurs,

avoiding arrester explosion, and it is maintenance-free. 
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level

in heavy pollution areas.

 

2. Surge Arrester Technical Parameters

Type	YH5W5-27/72
Rated voltage---------kV	27	4/10µS High current impulse kA	65
MCOV  ----------------kV	22	Lightning impulse withstand kV	150
Nominal Current-------kA	5	Power frequency voltage withstand(dry/wet)kV	70
Residual voltage of steep impulse----at 5kA(kV)	78	0.1S TOV--------------kV	32.4
8/20µS Residual voltage of lightning impulse current kV(Peak value)-----at 5kA(kV)	72	1S TOV----------------kV	31.05
Residual voltage of switching impulse current kV (peak value)----at 1kA  (kV)	/	10S TOV---------------kV	29.7
1mA D.C reference voltage (kV)	38.5	1200S TOV-------------kV	27
Line discharge level	1	Creepage distance ----mm	915
2mS long duration impulse current A	250	Material employed in series non-linear resistor	Zinc Oxide

4. Surge Arrester Working Condition 

Environment temperature: -40--+40 degree

altitude:<1000m

48HZ<Rated frequency<62HZ

Power frequency voltage should not be more than continuous running voltage

Max wind speed should be less than 35m/s

Earthquake intensity should be less than 7 degree

If used in contamination area, should be noted in advance.

Advantage:

1, Strong aging resistance

2, Long service life

3, Reasonable price

4, Porcelain uniform

5, Nice Appearance

6, Superior properties of high and low tempreture resistance, 

    mechnical capability, electrical function.  

Product structure Our company specially produces composite insulator for power transmission line, the important structure is made of shed housing, epoxy fiberglass core and metal end fittings. The surface of terminal end fittings is covered with zinc coating(hot-dip galvanization) for corrosion protection. Compared with same type ceramic and glass insulator, silicone rubber insulator has the following advantages:
(1)Small volume, light weight(is 1/7~1/10 times than ceramic insulator in the same voltage), sheds have good elasticity, not broken, convenient transportation and installation, economy.
(2)High mechanical strength. FRP ROD has high tensile strength, which is 5-10 times than ceramic materials, for core is small cross section, which makes the products small size, light weight, high tensile strength, and easy to manufacture more than 300KN large tons insulators.
(3)High antifouling property, good aging resistance performance, the sheds made of silicone rubber injection mold has good hydrophobicity and migration, which makes insulator high anti pollution flashover voltage and good electric corrosion resistance.
(4)Easy installation and maintenance, can greatly reduce outage loss which cause due to maintenance and maintenance charges which cause by manual labor intensity.
(5)Simple production process, short delivery time.

PRODUCTS DISPLAY

The product are passed standard of ISO9001-2008 Quality system approval
Porduct standard: GB, ANSI, DIN, AS, BS, IEC

Factory


We have group of valuable clients:
State Grid Corporation of Vhina
Janpan Sumitomo
ABB-Switzerland, Sweden, Russia,US
German Siemens,
Japan Toshiba,
Etc. 

 

Welcome to visit our factory and start our business here. 

For more about us,please feel free to contact us directly: