HF 에폭시 재료 에폭시 수지 및 경화제 Live Edge 에폭시 레스토랑/사무실 책상 위에 페인트 칠을 위한 접착제

• CAS No.: 25068-38-6
• Formula: C15h16o2c2h7onc3h5ocl
• EINECS: 231-072-3
• Bonding Function: Pressure sensitive Adhesive
• Morphology: Water-Soluble
• Application: Construction, Marble Stone Top Coating
• Material: Epoxy
• Classification: Top Coating
• Main Agent Composition: Natural Polymer
• Characteristic: Waterproof
• Promoter Composition: Curing Agent
• Composition: Organic Material
• Color: Clear
• 입력합니다: 이중 부품 접착제
• 혼합 비율: 3:1
• 인증서: RoHS, REACH, PAH, ASTM
• 수명: 안티 옐로우 5년 이상
• 등급: 식품용 수지
• VOC: VOC가 낮은 냄새
• 리플: 리플 없음
• 레벨링: 셀프 레벨링 및 내구성이 매우 뛰어납니다
• UV: 자외선 차단
• 솔리드: 100% 고체
• 운송 패키지: Barrel/ Carton/ Wooden Box
• 사양: 1KG/5KG/20KG/50KG/ 200KG
• 등록상표: HF
• 원산지: Guangdong
• 세관코드: 3506912000
• 생산 능력: 5000000 Tons/Year

제품 설명

HF Chemical High Hardness Epoxy AB Glue Resin For Wood Table Top Coat 
 

Product Parameters

 

Item (HF3001)	Epoxy Resin(A )	Epoxy Resin(B )
Color	Transparent Liquid	Transparent Liquid
Viscosity@25ºC(mpa.s)	775	50
Mix Ratio(by weight)	3	1
Hardness(Shored)	90
Operation time(100g mixed glue ,25ºC)	40 Minutes
Curing Time(25ºC)	24 Hours
Suddenly Mixed Volume	1 Liter
Shelf Time	12 Months

Feature
Epoxy resin HF3001 is special formula for Stone/ Marble Countertop with bright surface

* No Toxic Organic Compounds or Heavy Metals

* 100% Solids, Low VOC, Low odor,UV resistant

* Self-Leveling and Extremely Durable

* Crystal Clear, High Gloss and Excellent Color Stability

*Not whitish, no bubbles

*Anti-yellow for at least five years

*Food grade resin, wear-resistant
 

Detailed Photos

More Applications

 
Wooden furniture, top coating, DIY craft casting, epoxy floor, soft doming resin, etc... 


 

Packaging & Shipping

 

Our Advantages

 

Customers Feedback

 

FAQ

 

How to use

Step 1: The ideal working temperature is around a constant 77°F. Best results can be obtained at constant temperatures between 70°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. We recommend using this product on a leveled and flat work surface.

 

Step 2: Measure product in accordance with your intended use. Prepare 2 parts Base Resin to 1 part Curing Agent by liquid volume.Pour the Curing Agent first and then the Base Resin into a clean, smooth-sided container large enough to hold all the liquid and allow room for mixing.

 

Step 3: The material must be mixed thoroughly for at least 3 minutes. Be sure to scrape the container sides, bottom, and corners as you mix. Be careful not to whip excessive air into the mixture. If mixing a gallon, use a power mixer set to "hand speed." For smaller quantities, use stir sticks. Do not mix more than a gallon. Pour into a new, clean container and mix for an additional minute.

 

Step 4: Pour the mixed resin onto the surface and distribute evenly with a squeegee or gloved hand. Continue to pour remaining material to achieve the desired thickness, allowing the resin to flow evenly over the project's sides. Resin can be poured up to 1/4" thick per pour.

 

Step 5: Use a heat source such as a heat gun to remove any bubbles by adding a small amount of heat to the surrounding area. The bubble will rise to the surface and pop.

 

Step 6: If you are going to make a second pour, the first pour should still be slightly sticky. Once the second pour is made, bubbles may once again need to be removed. Material will feel hard after 45-60 minutes, cure to the point of workability within 24 hours, but full cure and maximum hardness can require up to 7 days, depending upon the temperature.