China Manufacturer SL72 SL82 SL92 Galvanized Reinforcement Concrete Steel Wire Mesh 200*200mm Square Reinforcing Mesh

• After-sales Service: 24 Hours Online
• Warranty: 5 Years
• 자료: 낮은 탄소 철 와이어
• 구멍 모양: 광장
• 신청: 건설 철망, 메쉬 보호
• 유형: 용접 메쉬
• 모델 번호.: SL72/SL82/SL92
• 인증: ISO9001
• 조건: 새로운
• 인장 강도: 515분 이상
• 항복 강도: 500만 명 이상
• agt: 1.03%
• 표준: AS-nzs4671-2001
• 운송 패키지: Bundle &Pallet
• 사양: 2.4m x 6m
• 등록상표: heyou
• 원산지: China
• 세관코드: 73142000
• 생산 능력: 120000tons

제품 설명

Reinforcing Welded Wire Mesh is also called Construction reinforced concrete mesh, Concrete reinforcing mesh ,wire steel bar mesh, steel concrete mesh.  Reinforcing Welded Wire Mesh is longitudnal reinforcement and transverse reinforcement were arraanged in a certain interval and  at right angles to each other, all the intersections are welded together. 

It was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm.

 

Common size of Sqaure reinforcing mesh panel for Austialian Market

Mesh Type and reference number	Longitudinal bars		Cross-bars		Mass for 6 x2.4 m sheets		Cross-sectional area/m width
	No. x dia., mm	Pitch@mm	No. x dia., mm	Pitch@mm	Unit area kg/sqm	Sheet, kg	Long'l bars sqmm/m	Cross bars sqmm/m
Squre, with edge side-lapping bars
SL102	10 x 9.5 + 4 x 6.75	200100	30 x 9.5	200	5.6	80	354	354
SL92	10 X 8.6 + 4 X 6.0	200100	30 x 8.6	200	4.6	66	290	290
SL82	10 x 7.6 + 4 x 6.0	200100	30 x 7.6	200	3.6	52	227	227
SL72	10 x 6.75 + 4 x 5.0	200100	30 x 6.75	200	2.8	41	179	179
SL62	10 x 6.0 + 4 x 5.0	200100	30 x 6.0	200	2.2	33	141	141
Squre, without edge side - lapping bars
SL81	25 X 7.6	100	60 x 7.6	100	7.1	105	454	454

 

What is the material of the slab mesh reinforcement?
We adopt R250N,D500L,D500N,D300E,D500E as material to make the slab mesh reinforcement, especially D300E and D500E is seismic grade.

 

The production process of reinforcement steel mesh

Firstly,Purchase wire rod from steel factory

Secondly,Test the raw material tensile strength

Thirdly,drawing wire diameter as per contract	Fourthly,Straight and Cutting wire as per contract
Fifthly,The reinforcement steel mesh welded by automatic and electric resistance machine	After finished producing,the reinforcement steel mesh has a good condition storage.
Clearly and visible notches	Firmly and strong solid joint
Messured wire diameter of reinforcement steel mesh	Messured mesh space of reinfocement steel mesh

Our products packing and shipment:
 

Steel pallet for reinforcing mesh size 2.4m *6m	Loading container for reinforcing mesh sheet:2.4m *6m

3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars,twin bars or combination of single bars and twin bars.
4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels.

4.1.1
Table1
Composition of reinforcing steels

Type of analysis	Chemical composition,% max
	All grades			Carbon equivalent value(Ceq)for standard grades
	C	P	S	250N	500L	500N	300E	500E
Cast analysis	0.22	0.050	0.050	0.43	0.39	0.44	0.43	0.49
Products analysis	0.24	0.055	0.055	0.45	0.41	0.46	0.45	0.51

4.1.2
Table 2
Characteristic mechanical properties of reinforcing steels 

Property	250N (Note1)	500L (Note1)	500N	300E (Seismic)	500E (Seismic)	Type of specified value
Yield Stress(Mpa) RekL                       RekU	≥250 ---------	≥500 ≤750	≥500 ≤650	≥300 ≤380	≥500 ≤600	CvL:p=0.95 CvU:p=0.05
Ratio         Rm/Re	≥1.08 ---------	≥1.03 -----------	≥1.08 --------	≥1.15 ≤1.50	≥1.15 ≤1.40	CvL:p=0.90 CvU:p=0.10
Unitform Elogation Agt(%)	≥5.0	≥1.5	≥5.0	≥15.0	≥10.0	CvL:p=0.90

Notes:

1. Grade 250N is supplied as plain round reinforcing steel complying with AS 3679.1,exceptthe tolerance of the diameter and roundness dosen't apply it.
2. For 500L steel bars,only requriement for wire diameter is less than 5.0mm is R_ekL≥500

Secondly,the panel size tolerances meassure way as:

1. Panel Size dimensions≤6m in length,there is 40mm tolerances.
2. Panel size dimensions>6m in length,the tolerance is ±0.7%
3. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract.
4. Weigh the each bundle weight to calculate each panel weight.