IADc 124 강철 이빨 Tricone 드릴 비트

• Type: Core Drill Bit
• Material: Tungsten Carbide
• Usage: Well Drilling
• Wob: 0.3-0.85kn/mm
• RPM: 180-60R/min
• 색상: 파란색 빨간색 또는 기타
• 모델 번호.: 6 in 152.4mm
• 크기: 6인치
• 운송 패키지: Wooden Case
• 사양: ISO9001
• 등록상표: ouyate
• 원산지: Hebei Hejian
• 세관코드: 82071990
• 생산 능력: 1000PCS/Month

제품 설명

IADCWOB(kN/mm)RPM(r/min)Formation

IADC	WOB(kN/mm)	RPM(r/min)	Formation
114\115	0.3-0.75	180-50	Soft formation with low compressive strength and high drillability,such as  mudstone,clay,chalk,etc
116\117	0.3-0.8	150-70	Soft formation with low compressive strength and high drillability,such as  mudstone,clay,chalk,etc
124\125	0.3-0.85	180-60	Soft formation with low compressive strength and high drillability,such as  mudstone,clay,salt,loose stands,soft limestone,etc
126\127	0.3-0.9	150-60	Soft formation with low compressive strength and high drillability,such as  mudstone,clay,salt,loose stands,soft limestone,etc
134\135	0.35-0.95	150-50	Soft to medium formation with low compressive strength or soft with harder streaks,such as  mudstone,shale,soft limestone ,sands,etc
136\137	0.35-1.0	120-60	Soft to medium formation with low compressive strength or soft with harder streaks,such as  mudstone,shale,soft limestone ,sands,etc
214\215	0.4-0.95	150-60	medium  hard formation with high compressive strength ,such as  medium soft shale,anhydrite,medium soft limestone ,medium soft sandstone as well as thick and hard streaks,etc
216\217	0.4-1.0	100-60	medium  hard formation with low compressive strength ,such as  medium soft shale,limestone and sandstone as well as thick and hard streaks,etc
244	0.35-0.95	150-50	medium  hard formation with high compressive strength ,such as  hard shale,sands ,limestone,etc
246\247	0.4-1.0	80-50	medium  hard formation with high compressive strength ,such as  hard shale,sands ,limestone,etc
324\325	0.4-1.0	120-50	hard formation with  high strength and abrasiveness such as hard limestone,hard sands,dolomite,hard shale,etc

Cutting Structure
In response to the characteristics that inserts in different areas on the cone have different cutting actions, conical inserts are placed in permanent contact area and wedge inserts are placed in alternative contact area so that the drilling efficiency is greatly improved. Wear resistance of cutting structure is enhanced by setting diamond inserts in the permanent contact area of the cone where inserts are severely worn. Tungsten carbide inserts are placed on cone top face to protect cone body from abrasive erosion.
Gauge Structure
With active cutting gauge protection inserts on bit body, the bit has good gauge protection and updrill capability.
Bearing Structure
High precision journal bearing. Balls lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy. Abrasion resistance and seizure resistance of the bearing are improved. Compared with three cone bit, the leg bearing is bigger, so it can receive higher WOB and high reliability.
Hydraulic Design
Small angled watercourse design increased the shirttail thickness and can effectively prevent the watercourse erosion. Opitmized hydraulics structure improves the cleaning capability and increase ROP.
Product application
It is suitable for water well drilling and geothermall well