기본 정보
판매 후 서비스
Door-to-Door Service Is Available
방법의 유형
Manual and Automatic
Type of Gas and Pressure
Propane 0.65MPa
Volume of Single Can
3.0L
Powder Feeding Gas
Nitrogen
Powder Feeding Velocity
0~160g/Min
Spray Particles Velocity
500-600m/S
제품 설명
SX-8000 HVOF spray equipment, tungsten carbide powder thermal spray coating machine
Our SX-8000 HVOF spray equipment is the next generation high pressure, high velocity Oxygen-fuel (HVOF) system based on our established, industry-leading SX-5000 HVOF spray equipment. The basic principle is kerosene fully atomized by the atomizing nozzle will form a combustible mixture with accelerant oxygen then go into the combustion chamber. The ignition system will ignite the mix gas. It will create supersonic combustion flame with high temperature and high-pressure flow after going through by Laval nozzle firing, powder feeding system will send the powder into flame stream accelerated from a low-pressure area. After heating and speeding it will spray the work-piece surface to form a high-quality coating.
SX-8000 HVOF spray equipment is a development of spraying equipment on the basis of introduction/ digestion /absorption of foreign advanced equipment and technology.
Spraying samples:
Application of SX-8000 HVOF spray equipment/tungsten carbide powder spray machine
SX-8000 is wide use, such as steam turbine spraying, spraying the tungsten carbide coating on screw, ball valve abrasion resistant coating, abrasion resistant coating on mixe, roller surface abrasion resistant coating, tungsten carbide coating, inner ring wear resistant coating, wear resistant spraying on wire drawing wheel, wear resistant coating on screw, wear resistant coating on large scale weaving roller, tungsten carbide coating on valve plate, wear resistant and corrosion resistant coating on exhaust pipe, wear resistant coating of wire drawing ring,wear resistant coating on pump impeller, wear resistant and corrosion resistant coating of boiler heating surface and so on.
Compare to other HVOF, there are eight different notable features as following:
1. Kerosene fuel is combustion while oxygen is accelerant. It is a relatively safe combustion mode;
2. The spraying gun is designed according to rocket principle. The pressure in combustion chamber can get up to 150PSI. The speed of flame is more than 2000m/s. The output power is huge and can be adjusted;
3.Radial powder feeding. This new method of injecting the powder can be preferably solubilized and uniformly distributed throughout the flame, improving the coverage efficiency and quality of the coating;
4. The system is designed to control temperature range in a certain interval of the positioning and increase the speed increased as the primary optimization target function; The coating is not only combination of high strength, high coating density, and the surface stress is a compressive stress proved by X-ray diffraction apparatus.
5.Modular design, high-performance PLC control, Safe and simple operation;
6.Particles speed is 1100 m/s by combustion (3300-3300 per feet per second). It is significantly faster than other HVOF system;
7.The thickness of coating layer is more than 1/2 inch (compressive stress coating).The hardness is higher than any other HVOF system (HVOF- 8000 type spraying WC - Co coating microscopic hardness is up to 1450, and WC - Co coating micro hardness by gas of HVOF is only around 900 ~ 1100);
8.SX-8000 HVOF spray equipment achieves high pressure HVOF coating with excellent quality, the binding strength of coating can reach 90MPa.
SX-8000 HVOF spray equipment insists of: (1) Control cabinet (2) Powder feeder (3) Spray gun (4) Water chiller (5) Kerosene storage tank and Pipelines connection system, etc.
Characteristics of HVOF equipment spray coating
(1) high temperature resisting coatingcan spray all kind of Metal powder, such as Ceramic powder ( Chrome oxide, Titanium oxide, Aluminum oxide, aluminum titanium oxide, Zirconium oxide powder, etc.), Alloy powder (WC- Co, Cr3C2NiCr), Chrome, Titanium, Silicon powder, etc.
Temperatures in the arc zone approach 36,000°F (20,000°K).
(2) Inert gas can be used as working medium to reduce the oxidation of spraying particles.
(3) The coating can get high bond strength, low porosity. You can get accurate coating by controlling technological parameters.
Parameters of SX-8000 HVOF spray equipment control cabinet
No. | Item | Basic parameters |
1 | Control model | Touch screen +MFC+PLC control |
2 | Input power | 550W |
3 | Kerosene pressure / flow rate | 1.2MPa 0~60L/H |
4 | Oxygen pressure / flow rate | 1.6MPa 0~60m3/H |
5 | Carrier gas pressure / flow | 0.35~0.4MPa 3~15L/min |
6 | Control cabinet external dimension | 750*900*1650mm |
7 | Control cabinet weight | 259Kg |
Parameters of SX-8000 HVOF spray machine-spray gun
No | Item | Basic parameters |
1 | Flame speed | About 2100m/s |
2 | Flame temperature | About 5000ºC |
3 | Power of spray gun | 150KW(equivalent value) |
4 | Powder particle velocity | 1100 m/s |
5 | Cooling-down method | Water cooling |
6 | Cooling water flow | 9.5L/min |
7 | Coating porosity | <1% |
8 | Coating bonding strength | >90MPa |
9 | Powder size | 10-45μm |
10 | Fuel pressure and flow rate | 1.2MPa 0~60L/min |
11 | Oxygen pressure and flow rate | 1.6MPa0~60m3/H |
12 | Nitrogen pressure and flow rate | 0.35~0.4MPa 3~15L/min |
14 | Spray gun external dimension | 90mmX100mmX350mm |
15 | Weight of spray gun | Approximately 4.5Kg |
Other main thermal spraying equipments and service:
(1) Plasma Spray Machine
(2) Thermal Spray Coating Services
(3) HVOF spray equipment
(4) Arc spray equipment
(5) Thermal spraying room
(6) Spraying manipulator, etc.
We not only provide spraying equipment, but also can provide the corresponding product solutions, so pls contact us!
주소:
1rst Floor, Building 3, Jinxuan Industrial Park, 202 Shiyu Road, Guangzhou, Guangdong, China
사업 유형:
제조사/공장
사업 범위:
제조 가공 기계
회사소개:
중국의 유명한 표면 솔루션 및 열 처리 회사인 Guangzhou Sanxin Metal S&T Co., Ltd.는 고객에게 혁신적인 표면 엔지니어링 제품 및 서비스를 제공하는 데 초점을 맞추고 있으며, 고객을 만족시키기 위해 열 스프레이 및 기타 고급 코팅 및 표면 개선 기술을 사용합니다. 또한, 중국의 초기 전문 기업으로서, 고주파수 인덕션 가열 장비, 슈퍼 오디오 퀜칭 장비, 전자기 인덕션 히터(고주파/중간 주파수), CNC 퀜칭 전문 기계를 연구하고 개발하고 있습니다.
Guangzhou Sanxin Metal S&T Co., Ltd. 회사는 1978년에 설립되었습니다. 우리는 중국에서 열 분무 장비 및 침을 뱉는 표적의 개발 분야의 전문 개척자입니다. 당사는 다양한 스프레이 장비, 인덕션 가열 장비 및 관련 액세서리를 제조하며
아크 스프레이 장비와 와이어 스프레이 기계,
플라즈마 스프레이 장비 및 액세서리,
HVOF 스프레이 장비 및 액세서리,
불꽃 스프레이 기계,
방열 스프레이 룸,
자동 스프레이 시스템 등의 제품과 서비스를 제공합니다.
건축 및 자동차 유리 코팅 부식 방지 코팅 현장 건설 서비스
회사 소개 1978년부터 약 30년간 2세대를 거치며 Sanxin Metal은 스프레이 프로젝트 전용으로 사용되고 있습니다. 현재 우리는 중국에서 표면 공학 분야의 유명한 회사로 전력, 다리, 시영 건물, 종이 제작 및 인쇄, 석유, 화학 공학, 금속 공학 등 현재 당사는 약 50m2 이상의 건설 구역을 갖춘 보일러 분사 발전 스테이션 프로젝트 및 방진코팅 프로젝트 50건 이상을 완료했습니다.
이 회사는 13개의 숙련된 건설그룹과 150명 이상의 숙련된 노동자를 보유하고 있습니다. 미국으로부터 수입되는 TAFA 초음속 아크 스프레이 장비와 플라즈마 스프레이 장비 50세트 이상, 30개 이상의 강력한 공기 압축기, 모래 분무기 및 공기 분무기 세트가 있습니다. 또한 10개 이상의 고급 품질 감지 장비, 코팅 표면 분석 장치, 대형 선반 및 고정밀 그라인더가 있습니다.
지난 30년 동안 고주파수 인덕션 가열 장비, 중간 주파수 전기 용광로, CNC 퀜칭 기계, 비표준 인덕션 가열 장비에도 초점을 맞추었다. 특별한 감각과 다양한 기술 솔루션에 대한 풍부한 경험을 쌓으며, 수백 가지의 고급, 특수, 까다로운 기술 문제를 해결했습니다. 회사 자격 산신 금속은 중국 표면 공학 협회 및 국가 방열 스프레이 협업의 회원사입니다. 당사는 열분무 엔지니어링 건설 공사 공인 자격과 ISO9001:2000 품질 인증 시스템 인증을 보유하고 있습니다. 30년 이상 사업을 지속해 온 동안 우리는 고객을 만족시키기 위해 보다 효율적이고 내구성이 뛰어나며 믿을 수 있는 제품을 개발, 연구 및 제조하는 데 항상 전념해 왔습니다. 회사의 가치 오늘날, 우리 회사의 고객은 과거 처럼 자체 운영에 필요하거나 생산하는 구성 요소의 가치와 서비스 성능을 개선하는 데 도움이 되는 표면 솔루션 및 가열 처리 솔루션을 제공해야 한다는 과제에 직면해 있습니다.
우리는 처음부터 고객의 충성도를 높이기 위해 최선을 다했습니다. 이러한 노력은 고객이 현재와 미래의 경쟁 환경에서 필요로 하는 이점을 제공함으로써 고객이 해당 분야에서 선두를 유지할 수 있도록 하는 헌신적인 노력, 서비스 및 혁신을 통해 이루어졌습니다. 고객, 직원, 공급업체 및 지역 사회가 결정한 것처럼, 중국과 세계에서 가장 우수한 성능의 표면 처리 및 인덕션 가열 회사가 되는 우리의 비전.