기본 정보
Lightning Protection
With Lightning Protection
Certification
ISO, RoHS, CE
Installation Type
Indoor, Small Size
Technic Advantage
Alc&Agc
Noise Figure
Less Than 6db
Automatic Level Control
More Than 15db,Auto Shut off 31db After 15db
Gain Flatness
Less Than 6db(P-P)
Standard1
GSM Meet Etsi Ts 151 026 V6.1.0
Power Supply
Input AC90~264V,Output DC5V / 2A
Environment Conditions
IP40
제품 설명
repetidor de sinal celular
Features:
1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 15dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption - 6W only.
Electrical specification | Uplink | Downlink |
Frequency Range | CDMA800 | 824 ~ 849 MHz | 869 ~ 894 MHz |
CDMA1900 | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz |
GSM850 | 824 ~ 849 MHz | 869 ~ 894 MHz |
GSM&GSM | 880 ~ 915 MHz | 925 ~ 960 MHz |
DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz |
PCS | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz |
WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz |
AWS | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz |
LTE | 700 MHz( A, B, C, D band optional) |
2500 ~ 2550 MHz | 2620 ~ 2670 MHz |
Max .Gain | ≥ 65dB | ≥ 65dB |
Max .Output Power | ≥ 10dBm | ≥ 15dBm |
Band width (-3dB) | Wide Band |
MGC ( Step Attenuation ) | ≥ 15dB / 5dB step |
Automatic Level Control | ≥ 15dB,auto shut off 31dB after 15dB |
Gain Flatness | ≤6dB(P-P) |
Noise Figure | ≤6dB |
VSWR | ≤1.8 |
Group Delay | ≤5μs |
Frequency stability | ≤0.01ppm |
Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 V6.1.0 |
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) |
CDMA Meet IS95 & CDMA2000 |
LED Alarm | Standard |
Power LED | Green light when power on. |
ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 second red color |
Mechanical Specifications | Standard |
I /O Port | N-Female |
Impedance | 50 ohm |
Operating Temperature | -25ºC~+55ºC |
Environment Conditions | IP40 |
Dimensions | 250*125*52mm |
Weight | ≤ 2.5Kg |
Power Supply | Input AC90~264V,output DC12V / 3A |
1.1. RF technical specification
Electrical specification | Uplink | Downlink |
Frequency Range | CDMA | 824 ~ 849 MHz | 869 ~ 894 MHz |
GSM900&EGSM | 880 ~ 915 MHz | 925 ~ 960 MHz |
DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz |
PCS | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz |
WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz |
AWS | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz |
GSM850 | 824 ~ 849 MHz | 869 ~ 894 MHz |
CDMA1900 | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz |
Max. Gain | 10dBm | >=60dB | >=65dB |
15dBm | >=65dB | >=65dB |
20dBm | >=70dB | >=70dB |
23dBm | >=70dB | >=75dB |
27dBm | >=75dB | >=80dB |
30dBm | >=80dB | >=80dB |
Max. Output power | 10dBm | >=10dBm | >=10dBm |
15dBm | >=12dBm | >=15dBm |
20dBm | >=15dBm | >=20dBm |
23dBm | >=15dBm | >=23dBm |
27dBm | >=20dBm | >=27dBm |
30dBm | >=20dBm | >=30dBm |
Band width (-3dB) | Wide Band |
MGC (Step Attenuation) | >=31dB / 1dB step |
Automatic Level Control | >=15dB auto shut off after 15dB (Optional) |
Spurious Emission | 9KHz~1GHz | <=-36dBm @ 3KHz |
1GHz~12.75GHz | <=-30dBm @ 3KHz |
Noise Figure | <=6dB |
VSWR | <=2.0 |
Group Delay | <=1.5μs |
LED Alarm | Standard |
LED Alarm | LED 1 | Power Indicator |
LED 2 | (ALC 1~5dB,Grange;ALC 15~20dB,Red, then shut off automatically) |
1.2. Mechanical specification
SN | Item | specification |
1 | Environment Conditions | IP40 |
2 | Cooling mode | Nature cooling |
1.3. Environment Conditions
SN | Item | specification |
1 | Operating Temperature | -25°C to +55°C |
2 | Storage Temperature | -40°C to +80°C |
3 | Humidity | 5% to 85% |
1.4. Requirements for adapters
SN | Item | Minimum | Typical value | Maximum |
1 | Input Voltage Range | 90 V | 220 V | 264 V |
2 | Output Voltage Range | 47 Hz | 50Hz | 63 Hz |
2. Installation
The repeaters should be used to cover the indoor area. Humidity and temperature of working environment can affect the reliability of repeater. So, temperature, humidity, dust, interference, power, space requirements and other factors should be considered during installation of repeater.
2.1. Installation Location Requirement
1) It is appreciated that the repeater is installed in a cool, dry and ventilated room without erosive gas and smoke and without leakage on its proof.
2) Or a cool and ventilated wall of which sun-proof and waterproof is expected.
3) Besides above, common wall, tower or high pole is Ok too.
4) Installation height should be easy for RF cable wiring, heat dissipation, security and maintenance.
5) Have a set of independent and stable power supply.
6) Have lightning conductor in the building, tower or high pole with enough strength or stability.
2.2. Power requirement
Generally it is AC power supply, and the requirement of AC is 90~264VAC / 50±5Hz
2.3. Installation tools and accessory
No. | Name | Specification | Quantity | Remark |
1 | Plastic Expansion Bolt | M5*24 | 6 | Standard accessories |
2 | Tapping screw | M3*27 | 4 | Standard accessories |
3 | Hanging folder | | 1 | Standard accessories |
4 | reciprocating drill | | 1 | Engineering-owned, punch the wall |
5 | Shot bit | M3 | 1 | Engineering-owned, punch the wall |
1.1.1. Manual Gain Control (MGC)
Switches 1-5 represent Downlink and 6-10 represent Uplink. When it is necessary to adjust the gain by DIP switch, firstly please adjust Downlink gain according to input signals, secondly please adjust Uplink gain according to Downlink gain.
The DIP Switches have default 'OFF' status; please push relevant switches to "ON" position if certain attenuation value needs to be achieved.
l DIP switch downlink attenuation setting:
Att | 1 | 2 | 3 | 4 | 5 | Att. | 1 | 2 | 3 | 4 | 5 | Att. | 1 | 2 | 3 | 4 | 5 |
0 dB | off | off | off | off | off | 11dB | ON | ON | off | ON | off | 22dB | off | ON | ON | off | ON |
1 dB | ON | off | off | off | off | 12dB | off | off | ON | ON | off | 23dB | ON | ON | ON | off | ON |
2 dB | off | ON | off | off | off | 13dB | ON | off | ON | ON | off | 24dB | off | off | off | ON | ON |
3 dB | ON | ON | off | off | off | 14dB | off | ON | ON | ON | off | 25dB | ON | off | off | ON | ON |
4 dB | off | off | ON | off | off | 15dB | ON | ON | ON | ON | off | 26dB | off | ON | off | ON | ON |
5 dB | ON | off | ON | off | off | 16dB | off | off | off | off | ON | 27dB | ON | ON | off | ON | ON |
6 dB | off | ON | ON | off | off | 17dB | ON | off | off | off | ON | 28dB | off | off | ON | ON | ON |
7 dB | ON | ON | ON | off | off | 18dB | off | ON | off | off | ON | 29dB | ON | off | ON | ON | ON |
8 dB | off | off | off | ON | off | 19dB | ON | ON | off | off | ON | 30dB | off | ON | ON | ON | ON |
9 dB | ON | off | off | ON | off | 20dB | off | off | ON | off | ON | 31dB | ON | ON | ON | ON | ON |
10 dB | off | ON | off | ON | off | 21dB | ON | off | ON | off | ON | | | | | | |
l DIP switch uplink attenuation setting:
Att | 6 | 7 | 8 | 9 | 10 | Att. | 6 | 7 | 8 | 9 | 10 | Att. | 6 | 7 | 8 | 9 | 10 |
0 dB | off | off | off | off | off | 11dB | ON | ON | off | ON | off | 22dB | off | ON | ON | off | ON |
1 dB | ON | off | off | off | off | 12dB | off | off | ON | ON | off | 23dB | ON | ON | ON | off | ON |
2 dB | off | ON | off | off | off | 13dB | ON | off | ON | ON | off | 24dB | off | off | off | ON | ON |
3 dB | ON | ON | off | off | off | 14dB | off | ON | ON | ON | off | 25dB | ON | off | off | ON | ON |
4 dB | off | off | ON | off | off | 15dB | ON | ON | ON | ON | off | 26dB | off | ON | off | ON | ON |
5 dB | ON | off | ON | off | off | 16dB | off | off | off | off | ON | 27dB | ON | ON | off | ON | ON |
6 dB | off | ON | ON | off | off | 17dB | ON | off | off | off | ON | 28dB | off | off | ON | ON | ON |
7 dB | ON | ON | ON | off | off | 18dB | off | ON | off | off | ON | 29dB | ON | off | ON | ON | ON |
8 dB | off | off | off | ON | off | 19dB | ON | ON | off | off | ON | 30dB | off | ON | ON | ON | ON |
9 dB | ON | off | off | ON | off | 20dB | off | off | ON | off | ON | 31dB | ON | ON | ON | ON | ON |
10 dB | off | ON | off | ON | off | 21dB | ON | off | ON | off | ON | | | | | | |
주소:
86#, Hou Ting, Number Two Industrial District, Sha Jing, Bao an District, Shenzhen, Guangdong, China
사업 유형:
제조사/공장
사업 범위:
전기전자
경영시스템 인증:
ISO 9001
회사소개:
Gainer International (China) Limited는 무선 통신 제품, 고객 전자 제품 분야의 전문 기업입니다. CE 인증 및 GB/T19001-2008/ISO 9001:2008을 통해 엔터프라이즈 환경을 크게 개발하고 있습니다. 전 세계 고객에게 좋은 제품과 서비스를 제공하기 위해 최선을 다하지 않습니다.
주로 신호 중계기, GSM 부스터, CDMA, DCS, WCDMA, iDEN, LTE CDMA450M, 기타 코상대성 제품 우리는 관련 분야의 숙련된 수출에 의해 형성된 자체 R&D 팀에서 제품을 제조합니다. 우리의 설계 및 제조는 고객의 특별한 요구 사항을 따를 수 있습니다.
우리는 고객에게 가장 만족스러운 서비스를 제공하기 위해 최선을 다합니다. 우리는 보다 경쟁력 있는 제품을 제공하고 고속 개발 시장의 요구를 충족하고자 합니다.
미국, 이탈리아, 네덜란드, 뉴질랜드, 프랑스, 스위스, 아일랜드, 러시아, 스페인, 폴란드, 영국, 남아프리카, 브라질, 멕시코, 사우디아라비아, 요르단, 인도네시아, 말레이시아, 인도, UAE, 아이슬란드, 호주, 체코, 키르기스안 등
저희는 시장 개발에 도움이 될 최고의 품질과 최저 가격을 제공하며, 장기적인 비즈니스 관계를 구축하기를 바랍니다.
게이너 인터내셔널과 협력하라, 당신은 세상의 승리자일 것이다, 우리는 당신을 기다리고 있다!