기본 정보
제품 설명
1.Application
The Outdoor Telecom Cabinet is widely used in wireless communication base station, such as 3G system, communication/network integrated service, access/transmission switching station, emergency communication/transmission, etc.
2.Structure
The cabinet, made of hot dip galvanized steel, is a double wall cabinet with 20mm PEF insulation between inner plate and outer plate. The cabinet includes equipment compartments and battery compartments . It is easy for installation and with perfect sealing performance.
Equipment Compartment: The upper part of the cabinet is equipment compartment, which is separated with the battery compartment by division plate, for heat insulation of the equipment compartment.
Battery Compartment: The lower part of the cabinet is battery compartment, which is used for installing batteries.There's heat insulation cotton between the cabinet inner wall and outer wall for keeping temperature. The cabinet includes air exhaust device for release of harmful air generated by the batteries.
Door and Door Lock: The cabinet door uses embedded structure. The door opening angle is larger than 110° and the door limit device can limit the opening angle. The lock is theftproof three point lock, supports padlock. There's open door alarm sensor, which works together with the environment monitoring unit.
Cabinet Size : 1300mm×760mm×2150mm (W×D×H)
3.Features
3.1 The cabinet is dustproof, sunproof and rainproof, which is suitable for outdoor environment.
3.2 The equipment compartment and battery compartment use air conditioner and fans for cooling, MTBF≥50000h.
3.3 -48V lamps is installed inside the cabinet.
3.4 The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. There're entrance holes individually for power cable, signal cable and optical cable.
3.5 All the cables used in the cabinet are made from flame retardant materials.
4.Technical Specs
4.1 Applicable Environment Conditions:
Environment Temperature: -40 ºC~ + 60ºC
Environment Humidity (RH): ≤95% (at + 40ºC)
Air Pressure: 70kPa ~ 106kPa
4.2 Material: hot dip galvanized steel
4.3 Surface Treatment: degreasing, derusting, rustproof phosphating (or galvanizing), powder coated.
4.4 Cabinet Load Bearing: ≥600kg
4.5 Ingress Protection: IP55
4.6 Flame Retardance: comply with GB5169.7 test A
4.7 Insulation Resistance: the insulation resistance between grounding devices and cabinet
body parts is not lower than 2×104M/500V(DC).
4.8 Withstand Voltage: the withstand voltage between grounding devices and cabinet body
parts is not lower than 3000V(DC)/1min.
4.9 Mechanical Strength: each surface can bear upright pressure>980N; after the door is open, its outer end can bear upright pressure>200N.
5.Lighting System
Every compartment include a -48VDC lamp.
6.Environment Monitoring Unit
See the Annex 1 "Environment Monitoring Unit Manual".
7.Air Conditioner
See the Annex 2 " Air Conditioner Manual".
8.Power Monitoring Module
See the Annex 3 "Power Monitoring Module Manual".
9. Packing, Transport and Storage
9.1 Packing
The cabinet packing is damp proof and shock proof. The outside of the packing is painted with damp proof sign, shock proof sign, direction sign, etc.
9.2 Transport
The cabinet can be transported by various transportation ways. During the transportation, the environment temperature should be -30ºC~+55ºC, the relative humidity should be ≤90%(at +30ºC). There should be a awning to prevent the product from rain and sunshine. Loading, unloading and moving of the product should be carried according to the transportation signs painted on the packing.
9.3 Storage
In the warehouse, the acid gas, Alkaline gas or other harmful gas should comply with the environment protection requirement.
주소:
Shiyan, Bao′an, Shenzhen, Guangdong, China
사업 유형:
제조사/공장, 무역 회사
사업 범위:
공업 설비와 부품, 전기전자
경영시스템 인증:
ISO 9001
회사소개:
Tianjin Estel Electronic Science and Technology Co., Ltd는 중국에 있으며, 실외 통신 캐비닛 공급업체입니다. 우리는 통신 캐비닛의 설계 및 생산을 전문으로 합니다. 또한 공기-공기 열 교환기, 에어컨 등을 포함한 통신 캐비닛용 냉각 솔루션을 제공할 수 있습니다. 또한 OEM 서비스도 제공합니다. 고객의 특별한 디자인, 도면 또는 요구 사항에 따라 다양한 유형의 캐비닛을 공급할 수 있습니다. 대부분의 캐비닛은 맞춤형 캐비닛입니다. 중국 전체에 우리의 제품과 솔루션이 배포되었습니다. 또한, 유럽, 미국, 아시아, 아프리카, 호주 등으로 제품을 수출했습니다. 저희는 Huawei와 Emerson의 통신 캐비닛 공급업체입니다.
실외 통신 캐비닛은 주로 교통, CATV, 전력 등에 사용됩니다. 게일, 비, 눈, 우박, 서리, 스모그, 태양 복사기 등 캐비닛의 주요 부분은 강철, 알루미늄 합금 또는 스테인리스 스틸로 만들 수 있습니다. 표면 처리: 옥외 분말 코팅, 부식 방지 캐비닛에는 에어컨, 열 교환기, 팬 등 세 가지 냉각 옵션이 있습니다.
"고객 우선, 품질 우선"은 항상 우리의 원칙입니다. 우리는 항상 고객의 요구 및 요구 사항을 충족하기 위해 최선을 다할 것입니다.
해외 고객을 환영합니다.