기본 정보
Ultimate Pressure
33hpa 25torr
Inlet&Outlet Dimensions
100mm
운송 패키지
Neutral Plywood or Based on Customers′ Request
사양
With CE Mark, ISO9001, Spare Parts Of High Level
제품 설명
DESCRIPTION
2SK Series Two-Stage Liquid Ring Vacuum Pumps can work well like two sets of SK series water ring vacuum pump. Due to SK series vacuum pumps only reach the maximum vacuum of-700mmHg, to meet the high vacuum and the large pumping speed under high vacuum, China developed the 2SK series water ring vacuum pump in 80s in the 20th century.
ADVANTAGE
1. Compared with SK water vacuum pump ,It gets high vacuum and pumping speed etc..
2. Simple structure and easy maintenance.
3. The mostly working medium is water and low maintenance costs.
4.The pump is widely use in many areas and suction water vapor,flammable, explosive and various gases contain a small amount of dust and liquid.
5. The pump can works in the harsh condition
FEATURES
1. Series SK,2SK Water Ring Vacuum Pumps can be used to exhaust ordinary gases as well as condensable gases(such as water vapor). Because they have the features of isothermal compression, they can exhaust flammable and explosive gases. When the pump made up of anti-corrosion material is selected, it can be used for exhausting corrosive gases too.
2. Series 2YK Liquid Ring Vacuum Pumps have the features of higher vacuum and better applicability. The different types of gases can be pumped with the selected suitable working media. Therefore, they can be applied in wider range.
3. The pumps run smoothly with low noise and consumption. The energy-saving is 30 percent comparing with the Water Jet and the Water Vapor Jet Pumps.
PARAMETER
Model | Displacement (m3/min) | Ultimate Pressure | Motor Power (kW) | Rotating Speed (rpm) | Water Supply (L/min) | Inlet&Outlet Dimensions (mm) | Weight (kg) |
hPa | Torr |
SK-0.5B | 0.5 | 47 | 35 | 1.5 | 2900 | 8 | 25 | 45 |
SK-0.8 | 0.8 | 47 | 35 | 2.2 | 2900 | 10 | 40 | 60 |
SK-1.5 | 1.5 | 47 | 35 | 4 | 2900 | 15 | 40 | 75 |
SK-3 | 3 | 80 | 60 | 5.5 | 1450 | 25 | 50 | 153 |
SK-6 | 6 | 80 | 60 | 11 | 1450 | 35 | 50 | 210 |
SK-12 | 12 | 80 | 60 | 22 | 980 | 70 | 100 | 600 |
SK-12B | 12 | 80 | 60 | 18.5 | 980 | 60 | 100 | 450 |
SK-25 | 25 | 80 | 60 | 45 | 980 | 70 | 100 | 900 |
SK-30 | 30 | 80 | 60 | 55 | 980 | 75 | 100 | 1200 |
SK-42 | 42 | 80 | 60 | 75 | 740 | 100 | 100 | 1500 |
2SK-2B | 2 | 40 | 30 | 5.5 | 1450 | 20 | 50 | 185 |
2YK-2B | 2 | 6.6 | 5 | 5.5 | 1450 | 20 | 50 | 185 |
2SK-3 | 3 | 40 | 30 | 7.5 | 1450 | 25 | 50 | 320 |
2YK-3 | 3 | 6.6 | 5 | 7.5 | 1450 | 25 | 50 | 320 |
2SK-6B | 6 | 33 | 30 | 11 | 1450 | 35 | 50 | 370 |
2YK-6B | 6 | 6.6 | 5 | 11 | 1450 | 35 | 50 | 370 |
2SK-12 | 12 | 33 | 25 | 22 | 980 | 70 | 80 | 850 |
2YK-12 | 12 | 6.6 | 5 | 22 | 980 | 70 | 80 | 850 |
2SK-25 | 25 | 33 | 25 | 55,45 | 980 | 60-110 | 100 | 926 |
2YK-25 | 25 | 6.6 | 5 | 55,45 | 980 | 60-110 | 100 | 926 |
APPLICATIONS
It can be applied to the vacuum drying, vacuum degassing, vacuum concentration, vacuum evaporation, vacuum impregnation process in chemical, pharmaceutical, metallurgy, food, medicine, textile, papermaking, electrical industry ( electronic industrial field) and so on. It can compose a vacuum system together with Roots Vacuum Pump and atmospheric Jet pump to achieve high vacuum, high efficiency, low power consumption.
Regular Selection for Water/Liquid Ring Vacuum Pump
1,Based on the vacuum value
(1)If the pump is operated for long time with the inlet pressure range between1.3×104~1×105Pa (between 100 and 760 Torr), please choose series SK Water Ring Vacuum Pump.
(2)If the pump is operated for long time with the inlet pressure range between5×103~1.3×104Pa(between40 and 100 Torr), please choose series 2SK Water Ring Vacuum Pump.
(3)If the pump is operated for long time with the inlet pressure range between1×103~1.3×104Pa(between8 and 100 Torr), please choose series 2YK Liquid Ring Vacuum Pump.
2,Working Media
There are four principles to choose working media(i.e.ring liquids);
(1) Lower saturated steam pressure
(2) Lower viscosity
(3) Stable physical & chemical features; no chemical reaction with the pumped gas;no corrosion to the pump; no pollution to the environment.
(4) Economy
If the water is selected as the working medium, the best temperature of supply water should be lower than or equal to 15 °C; the highest one should not be higher than 40°C. While the transformer oil or other low viscosity and saturated vapor pressure industrial oils are as the working media, the general supply temperature should not higher than 40°C and the working media temperature inside the pump chamber should not be higher than 60C, when the liquid with lower boiling point is selected as the working media under some special circumstances, the cooling unit must be equipped to cool down the working media in order to ensure that the max temperature is 30ºC-50ºC, lower than the boiling point. For the closed circulated system of working media, the liquid storage unit and cooler must be equipped, and the gas-liquid separator must be installed at outlet. The mechanical seal should be used for dynamic seal of the shaft.
3,Choose the dynamic seal of the shaft:
Choose the packing seal in general occasion; choose the mechanical seal when the pump is used in no leak occasion.
4,Choose the material of the part that the gas passed:
(1) For the non anti-corrosion pump, the shaft is made of 45#steel or 40Cr, other parts are made of cast Iron or brass;
(2) For the anti-corrosion pump,the parts that the gas passed, should be made of stainless steel 304 and 306, or other material suitable for the respectively corrosive gas, or the parts should be put with anti-corrosion coating.
5, The motor should be selected based on pumping pressure.
If the pump is used for vacuuming while transferring gas, the pressure of pump outlet exceeds the standard atmosphere pressure.
When the outlet pressure exceeds 0.15MPa, the special double-stages liquid ring compressor should be chosen and not the vacuum pump refitted. Tthe power of the equipped motor should be increased obviously. And the special gas-liquid separator and auto-drain unit should be equipped too.
When the outlet pressure is below 0.15MPa, it can use the vacuum pump refitted as compressor. The power of the equipped motor should be increased properly.
6,Composition methods of the water ring vacuum pump system
The opening circulation system should be used if the working liquid in the outlet need not be circulated or partially circulated.
The closed circulation system should be used if the working liquid in the outlet must be circulated.
WE CAN PROVIDE YOU
1. On-time Delivery, with More Choice
2. Perfect Technical Support
3. Customized Vacuum Solutions and Service
4. Samples Available
5. Long Quality Guarantee
6. Fast Response to Customers' Feedback in 12 hours
DEVELOPMENT VACUUM EQUIPMENT CO., LTD
ADD:DONGGANG INDZONE, TAIZHOU, ZHEJIANG, CHINA PC: 317106
TEL:+86-576-83598308 FAX:+86-576-83598309
주소:
Donggang Inddustrial Zone, Silin, Sanmen, Taizhou, Zhejiang, China
사업 유형:
제조사/공장
사업 범위:
공업 설비와 부품, 방직, 야금광산물과 에너지, 의약 위생, 전기전자, 제조 가공 기계, 포장 인쇄, 화학공업
경영시스템 인증:
ISO 9001
회사소개:
DVE 펌프는 전자, 전기, 금속 공학, 코팅, 세라믹, 제약, 화학, 종이 제작 산업, 진공 열 처리, 진공 건조 및 변압기의 임프레그네이션, 동결 건조, 에너지 산업, 항공 또는 기타 분야.
에어 프로덕트는 플랜트로서 진공 펌프, 진공 시스템, 전문 R&, D팀, 중미 기술 협력을 통해 20년 이상 전문 설계 및 제조 업무를 담당하며, CE 인증서를 획득하여 ISO9001:2008 품질 관리 시스템에 따라 엄격하게 생산을 관리합니다. 10년 이상 저희와 함께 운영한 많은 고객:
ALD Industries and Montagepark
Staaken GmbH
Starren Strasse 53-63
13581 Berlin, Germany
Dekker Vacuum Technologies, Inc
935 S. Woodland Ave. Michigan City, in 46360,
United States
Sea Port: Ningbo/Shanghai
, China Standard: CE 마크, 고급
배송 예비 부품: 일반적으로 공장 생산 일정에 따라 제공되지만 최초 주문
무상수리를 따를 수 있습니다. 펌프에 품질 문제가 있는 경우, 예비 부품의 무료 교체는
1년 내에 제공됩니다
정시 배송, 다양한 선택
완벽한 기술 지원
3.맞춤형 진공 솔루션 및 서비스
샘플 제공
긴 품질 보증
DVE에서 12시간 만에 고객의 피드백에 빠르게 대응 - 고품질이 표준이고 책임은 고객에게 있습니다.