면 롤스 불순물 원료 면지 품질 검사 장비

• After-sales Service: Online Training, Reply Customer′s Question in 12h
• Warranty: 12 Months
• 공작물의 최대 직경: <500mm
• 공작물의 질량 범위: <900kg
• 유형: 재료 시험기
• MAXCAPACITY: <1000KN
• 모델 번호.: YG041
• 정확도 등급: 0.5
• 로드 웨이: 전자 부하
• 로드 방법: 동적 부하
• 디스플레이: 니들
• 제어: 수동 제어
• 무게: 1백-5백kg
• 전원 소스: AC380V
• 오일 실린더 위치: 최고
• 사용: 날면의 불순물 품질 테스트
• 피처: 저렴한 가격, 간편한 운영
• 설명: 면 롤 불순물 원면 검사 장비
• 장비 폭: 490mm
• 치수: 100cm * 715cm * 874cm(l * w * h)
• 작동 모드: 수동
• 디스플레이 모드: 디지털
• 언어: 영어
• 총 무게: 280kg
• 전원 공급 장치: 3상 380V AC
• 납품 소요 시간: 주문 확인 후 7일
• 배송 방법: 바다
• 콘던스: 완전히 새로운
• 지불 기간: t/t 기준
• 거래 조건: 외경, 리모컨, DDU, CIF, CNF, 등
• 운송 패키지: Packed in Plywood Case
• 사양: 100cm* 715cm*874cm
• 등록상표: Delta
• 원산지: China Mainland
• 세관코드: 9031809090
• 생산 능력: 100 Sets / Month

제품 설명

YG041 Cotten Rolls Impurity Raw Cotton Quality Testing Equipment

Brief Introduction:
It is used to test the impurity quality of raw cotton, cotton rolls, raw strips and the defective content of cotton chemical fibers.

This machine uses the principle of the difference in the specific gravity of fiber and impurity, and separates fiber and impurity under the action of air flow and centrifugal force after combing.

Main Structure:
This machine is mainly composed of wall panels, cotton feeding devices, barbed rollers, fans and transmission devices and other main components.
Each component has two vertical wall panels connected into a whole. The entire body and transmission parts, motors, and electrical devices are all within the housing.
The cotton roller is individually driven by a special special slow speed motor, and the cotton feeding speed is controlled as needed through the universal transfer switch.
There is a lighting device above the impurity box in the machine, equipped with a low-voltage (24V) 20W electric light.
The red button on the electrical button board is the stop button and the green button is the start button.

Main Parameters:

Item Name	YG041 Cotton Impurity Analyzer
Machine width	490 mm
Feed roller	Diameter Φ57.15 mm
	Speed 0.9 rpm
Barbed roller	Diameter: Φ238.76mm
	Speed: 900 rpm
	Saw blade: ST-722
Distance between cotton table and barbed roller	0.18-0.23 mm
Distance between barbed roller and dust collector knife	0.53-0.61 mm
Distance between barbed roller and streamline plate	0.15-0.23 mm
Upper airflow adjustment plate adjustment gap	0.20-0.40 mm
Dimensions	100cm* 715cm*874cm(L*W*H)
Total weight	280 kg
Power supply	3 phase 380V AC