두 가지 방식 로드 패킹, PU 물질, POM, PTFE, NBR, FKM, Viton, TPE, 고무

• 자료: 탄성 중합체
• 신청: 하이드로 투투빈, 펌프, 해양
• 유형: 샤프트 씰
• 모양: 단방향 씰
• 더 많은 자료: PTFE, UPE, PU, 라미네이트 복합재, FRP, 탄소,
• 등록상표: INDRON
• 원산지: 중국
• 생산 능력: 50000

제품 설명

INDRON^® seals and gaskets are more durable than ordinary bearing materials under various operation medium conditions, such as dry friction, water lubrication (clear water or water containing sand and shale), oil lubrication and grease lubrication, etc. and even the operation condition of impulsive loads. INDRON® oil and gas sealing material has excellent mechanical properties, good rigidity, toughness, hardness, wear resistance, small permanent compression set, excellent high and low temperature resistance, and excellent aging resistance. It is mainly used to prevent lubricating oil from leaking out or oil mist overflowing in the oil tank.

Performance	Parameters
Density	(1.90~2.00)g/cm³
Shore D Hardness	67.0~75.0
Glass Transition Temperature	≥250ºC
Tensile Strength	≥38Mpa
Bending Strength	≥80Mpa
Compressive Strength	≥70Mpa
Impact Strength	≥7.0KJ/m²
Coefficent of Friction	0.12~0.18
Volume Resistivity	≤50