Container Plate Mill Baogang Standard Shipping Package Color Coated Steel Price Coil

• 판매 후 서비스: 온라인 서비스
• 보증: 온라인 서비스
• 표준: ASTM, JIS, 기가바이트, AISI, DIN, BS
• 인증: ISO, RoHS 준수, IBR
• 표면 처리: 아연
• 기술: 온천은 압연
• 모델 번호.: ppgi coil
• 신청: 컨테이너 플레이트
• 가장자리: 밀
• 재고: 재고
• 두께: 0.12 - 6mm
• 너비: 600-1500mm
• 지불: T/t
• 곡면 색상: RAL
• 운송 패키지: Standard Shipping Package
• 사양: 0.12-2.0mm*600-1250mm
• 등록상표: BAOGANG
• 원산지: 중국
• 생산 능력: 20000tons/Monthly

제품 설명

Product Description

PPGI & PPGL (prepainted galvanized steel &prepainted galvalume steel) also known as pre-coated steel or color coated steel coil, It is a product made of hot-dip galvanized steel sheet, hot-dip galvalume steel sheet, electro galvanized steel sheet, etc. After surface pretreatment, one or several layers of organic coating are applied on the surface, and then baked and solidified. The color coated steel coil is light in weight, beautiful in appearance, and has good anti-corrosion performance, and can be directly processed. The color is generally divided into gray, sea blue, brick red, etc. It is mainly used in advertising, construction, decoration, home appliances, electrical appliances, Furniture industry and transportation industry. The coatings used for color coated steel coils are based on the environment in which the resin is selected, such as polyester silicon modified polyester, polyvinyl chloride plastisol, polyvinylidene chloride, and the like.

product features

 

Product Parameters

Location	category	value
Executive standard	National standard	GB/T12754-2019
	American Standard/European Standard	ASTM A792M
Cold rolled substrate	Width specification	Cold rolled substrate thickness		Including metallized layer, the thickness after painting		Label thickness
	1200mm	≥0.41mm		≥0.46mm		≥0.45mm
	Size deviation	Width tolerance		Upper deviation +4mm
				Lower deviation 0
		thickness		Upper deviation +0.05mm
				Lower deviation 0
	Yield Strength	>300MPA
	tensile strength	270-500MPA
	elongation after break	More than 20%
	Steel coil inner diameter	Standard: 508mm,Except for other agreements
metal coating	alloy composition	AlZnMg or galvanized AlMg
	Total Weight of Plating Both Sides (Outside/Inside)	150g/ (75/75 or 85/65)
	Neutral salt spray test	The surface of the board (without passivation, anti-fingerprint and other treatments on the surface) has a neutral salt spray test of more than or equal to 2500 hours, and there is no red rust on the surface.
		When the salt spray test on the wound surface (end surface) is greater than or equal to 1200, there is no red rust on the surface.
PPGI paint	PE coating structure standard (μm)	Paint structure	2/1		outside		≥25
					Inside		≥7
	pencil hardness	Not less than HB
	Specular Gloss of Topcoat	Glossiness of finish paint mirror surface: ≥40 degrees
	T bend value	2T
	Impact energy	Not less than 9J
	Neutral salt spray test	Greater than or equal to 1500h without bubbles
	UVB-313	greater than or equal to 700h
PPGI use environment	humidity	20% to 90%
	temperature	Min -45°C, Max 43°C
	unit ammonia	<30ppm
	unit carbon dioxide	<7000ppm
	unit oxygen	21%
	unit hydrogen sulfide	<5ppm

Detailed Photos

Corrugated board classification :
Profiled steel plates are usually classified in a variety of ways depending on the application location, plate wave height, lap joint structure, and material. Common classification methods are as follows:

(1) Classified according to the applied parts - divided into roof panels, wall panels, floor decks and ceiling panels. In use, colored steel plates are used as wall decoration panels at the same time, and the architectural decoration effect is relatively novel and unique.
(2) Classified by wave height-divided into high wave boards (wave height ≥ 70mm), medium wave boards (wave height <70mm) and low wave boards (wave height <30mm).
(3) Classification by substrate material-divided into hot-dip galvanized substrates, hot-dip galvanized substrates, and hot-dip galvanized aluminum substrates.
(4) Classified according to the structure of the plate seam - divided into lap joint, undercut and buckle structure, etc. Among them, the undercut and buckled medium and high wave panels should be used as roof panels with high waterproof requirements; the lapped medium and high wave panels should be used as floor panels; the lapped low wave panels should be used as wall panels.

Company Profile

Certifications

Packaging & Shipping

 

FAQ

Q1: What's your terms of payment?

A: 30%T/T as the upfront deposit, 70% before delivery, We will show you the photos and package before you pay the balance.

 

Q2: What's the terms of delivery?

A: EXW, FOB, CFR, CIF.

 

Q3: What's the terms of packing?

A:Generally,we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirement.

Q4: What's your delivery time?

A: For stocks, we could transport the goods to loading port within 7 work days after we received the deposit. For production period, it usually takes about 15 days to 30 days after we received the deposit.

 

Q5: Could you produce according to the samples?

A: Yes, we can customer-made by your samples or technique drawings, we can build the mold and fixtures.

Q6: Could you provide the compliment samples?

A: Yes, we could provide the free samples on condition that it is available in stocks, however,the transportation fee is borne by buyer.

 

Q7: How could you guarantee your products quality?

A: Each piece of products is manufactured by certified workshops, inspected by us piece by piece according to national QA/QC standard. We also could issue the warranty to customer to guarantee the quality.