기본 정보
Warranty
One Year of Repair Warranty
Testing Equipment Type
Auto Service Tool
Update Method
by Internet
제품 설명
LAUNCH CRT5011E TPMS System Activation Programing Learning Reading & Sensor Activation & Full OBD2 Functions Auto Professional Diagnostic Tool
CRT511 is a professional TPMS diagnostic tool that integrates TPMS sensor activation, reading, learning and programming.It can activate and read tire pressure sensor information through high or low radio frequency and uses the OBD interface to reset the TPMS modules. Programming the sensor by receiving a high frequency 315MHz/433MHz
The key reason to Choose LAUNCH CRT5011E TPMS Diagnsotic Tool
1. Works For all 315/433MHz tire sensor
2.Activate/Learning TPMS Sensor
3. Read, copy, write Sensor ID quickly
4. Creat & Program Sensor(5 Methods),Program up to 8 sensors
5.TPMS system Diagnose, including read DTC, clear DTC, etc.
6.Built-in tire pressure learning instruction makes operation more easy
7.Cover 98% global vehicles with tire pressure system
8. Offer lifetime free update Online
9.Turn off TPMS Warning Light
10.Read ECU ID &Check OE Number
Activate/Learning TPMS Sensor
LAUNCH X431 CRT5011E can quickly activate the ID, wheel pressure, sensor frequency, tire temperature and battery status of the live sensor.
Creat & Program Sensor(5 Methods),Program up to 8 sensors
The user can use this function to program the sensor data to a blank LAUNCH sensor to replace the sensor with insufficient power and not working properly.
Provides three sensor programming methods: automatic, manual and copy by activation.
automatic
When the original sensor ID cannot be obtained, this function can be used to program the LAUNCH sensor according to the ID randomly created by the test vehicle.
Manual
The original sensor ID can be obtained, and this function can be used to manually enter the ID or create it at will.
Copy by activation
By first activating the original sensor data, and then copying the activated sensor data into the LAUNCH sensor. Before using this method, the original sensor data must be activated.
TPMS learning
The user can use this function to write the newly programmed sensor ID into the vehicle ECU for sensor identification. Only when the newly programmed sensor ID is different from the original sensor ID stored in the vehicle ECU, the re-learning operation is required.
A total of three sensor learning methods are provided: static learning, self-learning and OBD re-learning
Static learning
Static learning needs to put the vehicle in "learning mode", and then follow the learning steps prompted on the screen.
self-study
For some vehicles, the learning function can be completed by driving the vehicle self-learning.
OBD re-learning
This function allows the diagnostic equipment to directly write the sensor ID to the TPMS module.
To perform the OBD re-learning function, first use the tire pressure tool to activate all four tire sensors. Then use the diagnostic equipment and its attached diagnostic connector, and follow the on-screen instructions to complete the re-learning operation.
Full OBD2 Function
check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emission-related.
• Read dynamic data streams and MIL
• Read readiness status
• Freeze frame data
• Read DTCs
• Clear DTCs
• O2 sensor test
• On-board monitor test
• Read vehicle information
TPMS Diagnosis
Compatiable Vehicle List
For ABARTH,for ACURA ,for ALFA ROMEO, for ASTON-MARTIN ,for AUDI , for ALPINA , for BAIC, for BAOJUN, for BENTLEY,for BMW, for BORGWARD, for BUGATTI,for BUICK, for BYD, for CADILLAC, for CHANGAN, for CHERY, for CHEVROLET, for CHRYSLER, for CITROEN, for CMC, for DACIA, for DAEWOO, for DFM, for DODGE, for FAW, for FERRARI, for GEELY, for GMC, for GREAT WALL, for HAVAL, for HAIMA, for HOLDEN, for HONDA, for HSV, for HUMMER, for HYUNDAI, for INFINITI, for ISUZU, for JAC, for JAGUAR, for JEEP, for KIA, for LADA , for LAM BORGH-INI, for LANCIA, for LANDROVER, for LEXUS, for LIFAN, for LINCOLN, for LOTUS, for LUXGEN, for MAHINDRA, for MAN, for MASERATI, for MAYBACH, for MAXUS, for MAZDA, for MCLAREN, for MERCEDES, for MG, for MINI, for MITSUBISHI, for NISSAN , for OPEL , for PAGANI, for PEUGEOT, For PORSCHE, for QOROS, for RENAULT,for ROLLSROYCE, for SAAB, for SCION, for SEAT, for SKODA, for SMART, for SSANGYONG, for SUBARU, for SUZUKI, for SGMW, for TESLA, for SMART, for SSANGYONG, for SUBARU, TOYOTA, for TRAUM, for VAUXHALL, for VOLKSWA-GEN , for VOLVO, for ZOTYE,for FIAT, for FORD, for FOTON, for CHRYSLER, for GMC, for DFM, for CADILLAC, for CHERY, for CHEVROLET , for DODGE,for FAW, for FERRARI, for JAC ,for JAGURE
PACKING LIST:
Q & A
Q:System halts when reading data stream. What is the reason?
A:It may be caused by a slackened connector. Please turn off the tool, firmly connect the connector, and switch it on again.
Q:What to do when encountering screen flickering or font damage during use?
A:This bug can be fixed ONLY by doing the following:
1. Keep the memory card inserted into the tool and then connect the tool to the PC via USB cable.
2. The system will automatically upgrade the firmware and then reboot.
(Note: Although the tool can get power from vehicle's OBD II port via the diagnostic cable, it only allows users to perform vehicle diagnostics. It does not apply to software update or firmware fix operation. Do not attempt to connect the tool to the vehicle's OBD II port to fix this bug.)
Q:What to do when encountering screen flickering or font damage during use?
A:This bug can be fixed ONLY by doing the following:
1. Keep the memory card inserted into the tool and then connect the tool to the PC via USB cable.
2. The system will automatically upgrade the firmware and then reboot.
(Note: Although the tool can get power from vehicle's OBD II port via the diagnostic cable, it only allows users to perform vehicle diagnostics. It does not apply to software update or firmware fix operation. Do not attempt to connect the tool to the vehicle's OBD II port to fix this bug.)
Q:Screen of main unit flashes at engine ignition start.
A:Caused by electromagnetic disturbing, and this is normal phenomenon.
Q:There is no response when communicating with on-board computer.
A: Please confirm the proper voltage of power supply and check if the throttle has been closed, the transmission is in the neutral position, and the water is in proper temperature.
Q:Why are there so many fault codes?
A:Usually, it's caused by poor connection or fault circuit grounding.
Q:What to do if the tool fails to boot up?
A:Please connect the tool to the USB port of a computer to fix the firmware.
주소:
Room 205, Building 4, Songbai Road, Heshuikou Community, Matian Street, Guangming District, Shenzhen
사업 유형:
제조사/공장, 무역 회사
사업 범위:
자동차와 오토바이와 액세서리
경영시스템 인증:
ISO 9001
회사소개:
우리는 전 세계 제조업체 및 공급업체로서, 주로 자동 진단 도구, 중부하 트럭 진단 도구, 오토바이 진단 도구, 자동 마일 보정 키트, 자동 키 프로그래머, 자동 칩 튜닝, 자동 코드 판독기 자동 IMMO 판독기, 자동 ECU 프로그래머, 키 커팅 기계, 자동 트랜스폰더 키 및 VXDIAG VCX SE BMW 진단 및 프로그래밍 도구, Yanhua Mini ACDP 프로그래밍 마스터 BMW Module1/2/3/4/7/8/11과 같은 자동 트랜스폰더 칩, Mercedes BEZN C6 OEM DoIP Xentry Diagnosis VCI Multiplexer, BMW EF BMW E/F scanner II for Diagnosis + O주행 기록계 Reset + ELV Reset 등, AUMaxTEL MK906 MS906 온라인 진단 및 프로그래밍 도구 업데이트 버전, Lonsdor K518ISE K518 Key Programmer for All Makes with O기록계 Adjustmen, Iprog + 프로그래머 지원 IMMO + 마일리지 수정 + 에어백 재설정 Iprog PRO 2019년까지 Carprog/Digiprog/Tango, Autel MaxiCOM MK908P PRO 전체 시스템 진단 도구를 J2534 ECU 프로그래밍으로 교체, Autel MaxiIM IM608 고급 IMMO 및 키 프로그래밍 WiFi/Bluetooth OBD Full Diagnostic Scanner가 장착된 Autel MaxiSys Elite, J2534 ECU 프로그래밍, OBDSTAR X300 DP Plus PAD2 A/B/C 구성 이모빌라이저 + 특수 기능 + 마일리지 수정 ECU 프로그래밍 및 Toyota 스마트 키, 부팅용 KTM 벤치 읽기 및 쓰기, JUNGHEINRICH 진단 키트 JUDIT INCADO, OrangeX45 Professional 출시 IV 강력한 진단 도구, JMD Handy Baby II 4D/46/48/G CHIPS 카 키 칩 복사기 키 프로그래머 Handy Baby 2 키 프로그래머, Xhorse Condor Dolphin XP005 자동 키 절단 기계, FVDI J2534 진단 도구(Ford 및 Mazda 지원 온라인 모듈 프로그래밍), XTUNER E3 진단 도구, VPECKER E4 Easydiag Android용 Bluetooth 스캔 도구, Porsche Piwis 3 Porsche Tester III 진단 도구, X431 X-431 V + X431 PRO + X331 PRO3 출시, X431 V X431 PRO 출시 X431 V 8인치 태블릿 WiFi/Bluetooth 진단 도구, MB SD C5 SD Connect Compact 5성급 진단(차량 및 트럭용 WiFi 포함), AUTEL MaxiSYS MS906 자동 진단 Scanne, MaxiSYS PRO MS908P, AUTOBOSS V30 Elite Super Scanner, BMW AK91 Plus Key Programmer, BMW용 R280 Plus MC9S12XEP100 Chip, R290 BMW CAS4+ BDM 프로그래머, SuperOBD SKP-900 핸드헬드 OBD2 자동 키 프로그래머, BMW 및 Rolls-Royce용 Easycoding, Porsche Piwis II Porsche Piwis Tes2 Porsche Piwis 2 GIA 및 현대기아차 도구, DSO용 DSO DS Chrysler Diagnostic Tool WITECH VCI POD, BMW ICOM A2+B+C 진단 및 프로그래밍 도구, WABCO 진단 키트 WABCO 트레일러 및 트럭 진단 인터페이스, HCONNTRONSA PC 서비스 도구 HANTIBUDY 진단 Ifak CAN USB, Yale PC 서비스 도구 Ifak CAN USB 인터페이스, CN900 + 4D 디코더 + 46 클로너 박스 + Toyota G 칩 클로너 박스, MB SD 연결 Compact4, 오토바이용 IQ4bike Precise Electronic Diagnostics System, vag COM 19.6 VCDs 19.6, TM100 주요 프로그래머 Tango 주요 프로그래머 대신 Ford VCM II 진단 도구, BMW ICOM, BMW GT1, BMW OPS, BMW opps, Ford VCM IDS, GM TECH2, Nissan consult3, Benz Compact4 Star, Mitsubishi MUT3용 진단 스캐너, Toyota 및 Suzuki용 진단 테스터 - 2, Honda GNA600, VAS5054A, Volvo Dice, X-100+ X100 Plus 자동 키 프로그래머, GM MDI, X-100+ X100 Plus 키 프로그래머, CAT 어댑터 III, PS2 전문 진단 도구, Digimaster 3 트럭 진단 킹 - 다중 디젤 진단 인터페이스, Moto 7000TW 범용 오토바이 스캔 도구, 트럭 진단 도구 - Scania VCI3, BMW Explorer PROG, KTMflash ECU 프로그래머 및 변속기 전원 업그레이드 도구, KTAG ECU 프로그래밍 도구, KESS V2 OBD2 Manager 튜닝 키트, Scania VCI3 VCI 3, Hino 트럭 진단 탐색, Zed Bull 키 프로그래머, SBB의 주요 프로그래머, FGTech Gallett4 Galletto 4 Master, Volvo VCADS, JCB 전자 서비스 툴, Linde canbox 진단 툴, ISUZU 트럭 진단 툴, Caterpillar 진단 툴, Cummins 인라인 7 데이터 링크 어댑터, EST 인터페이스 통신 어댑터 II, John Deere 진단 어드바이저 EDL