기본 정보
제품 설명
HH(P) series pressure sensor module is consists of a ssop-hybrid sensor device, customized FR4 PCB and additional electronic components. Every ssop-hybrid sensor device includes a piezoresistive pressure sensor and a signal conditioning circuit. This temperature compensated and calibrated sensor module provides an accurate, high level analog output signal that is proportional to applied pressure. The maximum pressure rang of the sensor cell is 0~4000 KPa absolute pressure. The supply voltage is 5±0.5V,the type supply current is 2.5mA. The pressure sensor module has the features of the small form factor and high reliability. Application fields include automotive pressure monitoring, pneumatic gages, hand-held meters, industrial controls and so on.Operating CharacteristicsTable 1. Operating Characteristics (VS = 5.0 Vdc, TA = 25°C.
Characteristic | Symbol | Min | Typ | Max | Unit |
Pressure Range | Pop | --- | --- | 4000 | kPa |
Supply Voltage(1) | VS | 4.5 | 5.0 | 5.5 | Vdc |
Supply Current | IO | --- | 2.5 | 4 | mAdc |
Full Scale Span @ VS = 5.0 Volts(2) (0 to 85°C) | VFSS | --- | --- | 5 | Vdc |
Accuracy(3) (0 to 85°C) | --- | --- | --- | ± | 1.0 | % VFSS |
Sensitivity | V/P | Customized | mV/kPa |
Response Time(4) | tR | --- | 1.0 | --- | mS |
Warm-Up Time(5) | --- | --- | 10 | --- | mS |
Offset Stability(6) | --- | --- | ±0.5 | --- | % VFSS |
Power ON Rise Time | tpon | --- | --- | 10 | mS |
Notes:1. Device is ratiometric within this specified excitation range.2. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the minimum rated pressure.3. Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span at 25°C due to all sources of error including the following:Linearity:Output deviation from a straight line relationship with pressure over the specified pressure range.Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied.Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from the minimum or maximum rated pressure, at 25°C.TcSpan: Output deviation over the temperature range of 0 to 85°C, relative to 25°C.TcOffset: Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85°C, relative to 25°C.Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25°C.4. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a specified step change in pressure.5. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.6. Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test. MAXIMUM RATINGS(1) Table 2 MAXIMUM RATINGS(1)
Rating | Symbol | Value | Unit |
Maximum Pressure | PMAX | 2 times of range | kPa |
Maximum Supply Voltage | Vmax | -0.3 to 11 | Vdc |
Maximum Supply Current | Imax | 14 | mAdc |
ESD(MIL 883, Method 3015.7.) | | ±4 | kV |
Storage Temperature | TSTG | -40° to+135° °C | °C |
Operating Temperature | TA | -40° to+125° °C | °C |
Output Source Current @ Full Scale Output(2) | Io+ | 0.5 | mAdc |
Output Sink Current @ Minimum Pressure Offset(2) | Io- | -0.5 | mAdc |
1. Exposure beyond the specified limits may cause permanent damage or degradation to the device.2. Maximum Output Current is controlled by effective impedance from Vout to GND or Vout to VS in the application circuit.
주소:
2nd Floor, 1st Building, 608shengxia Road, Pudong District, Shanghai, China
사업 유형:
제조사/공장
사업 범위:
가전제품, 공업 설비와 부품, 자동차와 오토바이와 액세서리, 전기전자, 제조 가공 기계, 측정 기계
경영시스템 인증:
ISO 9001, ISO 9000, ISO 14000, ISO 20000, QC 080000
회사소개:
2006년에 설립된 Shanghai Integrated Micro-systems Technology Co., Ltd.는 MEMS(마이크로 전자 기계 시스템) 기술을 기반으로 하는 센서 칩 R&D, 생산 및 판매 회사에 참여하고 있습니다. 이 회사는 독자적인 제품 개발 팀을 보유하고 있으며, 풍부한 기술 인력을 보유하고 있으며 확산 실리콘 압력 센서 및 적외선 열화단 센서 칩 캡슐화 기술에 대한 관련 지적 재산권을 보유하고 있습니다. 설립 이후 상하이 마이크로시스템 및 정보 기술(CAS) 연구소의 국제 고급 MEMS 생산 라인에 의존하는 MEMS 압력 센서 칩과 적외선 열처리 원자로는 대량 생산될 수 있습니다.
MEMS 센서의 전문 제조업체로서, 프로젝트 863을 여러 번 맡아보고 MEMS 압력 센서 및 적외선 열 반응기 R&D, 설계, 생산 능력 면에서 국내 최고 수준에 도달했습니다. 우리는 다이 확산형 실리콘 압력 센서 칩의 코어를 설립합니다. 완전한 제품 라인 압력 센서 모듈은 압력 센서 다이(베어 칩), SO-8 및 DIP-6 플라스틱 칩, 고정밀 와이드 온도 압력 센서 모듈을 고객에게 제공할 수 있습니다. 현재 전자 혈압계, 타이어 공기압, 흡기 압력 센서 자동차 시장 부문의 국내 선두 위치에 있습니다. 200쌍의 열전대에 쌓인 적외선 열기의 독자적인 지적 재산권은 국제 수준에 도달하고 적외선 감도가 향상되었습니다. 그리고 열 반응기를 기반으로 적외선 CO2 센서 모듈을 개발했으며, 현재 교육 장비, 외부 공기 시스템, 실내 환경 모니터링, 농업 온실, 지능형 빌딩 등 많은 응용 분야에 SIMST는 고품질의 제품과 서비스를 제공하며, 제품 수요에 따라 맞춤 설정할 수 있습니다. 우리는 숭고한 이상을 가진 사람들을 진심으로 환영하며 공통의 발전을 추구합니다.