기본 정보
제품 설명
Features
Complete Freewheels FRS and FRSG are sealed sprag freewheels with ball bearings and ready
for installation. The freewheels FRS are supplied oil-filled. The freewheels FRSG are supplied grease filled. The freewheels FRS and FRSG are used as:
Backstops
Overrunning Clutches
Indexing Freewheels
Maximum torques up to 55 000 lb-ft.
Bores up to 7 inch. Standard bores in inch dimension are available from stock. Metric
bores on request.
Application example
Complete Freewheels FRS 600 in both drive units of a transport system with a conveyor belt that moves both forward and backward (reversible operation). In order to ensure that the conveyor belt is moved under tension, forward movement is driven by drive unit I, reverse movement by drive unit II. The freewheels automatically disengage the respective non working drive, eliminating the need for expensive external clutches or brakes. For forward movement, drive unit II is started in freewheeling direction of freewheel II; free - wheel II is in freewheeling operation and disengages drive unit II from the conveyor belt. After words drive unit I is started in the locking direction of the freewheel I;
freewheel I is in driving operation and the conveyor belt is moved forward by drive unit I. The speed of drive unit I is lower than that of drive unit II. Thus freewheel II remains in freewheeling operation and drive unit II is not improperly engaged. For reverse movement, the drive units are started in reverse order and direction of rotation at the corresponding speeds.
Freewheel Size | Maximum torque mm lb-ft | Nominal torque mn lb-ft | Max Speed | Freewheel Size | Maximum torque mm lb-ft | Nominal torque mn lb-ft | Max Speed |
Inner ring freewheels/overruns rpm | Outer ring freewheels/overruns rpm | Inner ring freewheels/overruns rpm | Outer ring freewheels/overruns rpm |
FRS300 | 420 | 210 | 2500 | 2600 | FRSG300 | 420 | 210 | 3600 | 3600 |
FRS400 | 670 | 335 | 1900 | 2100 | FRSG400 | 670 | 335 | 3600 | 3600 |
FRS500 | 1600 | 800 | 1400 | 1900 | FRSG500 | 1600 | 800 | 3600 | 3600 |
FRS550 | 3050 | 1525 | 1175 | 1600 | FRSG550 | 3050 | 1525 | 3600 | 3600 |
FRS600 | 3900 | 1950 | 1100 | 1500 | FRSG600 | 3900 | 1950 | 3600 | 3600 |
FRS650 | 5400 | 2700 | 900 | 1250 | FRSG650 | 5400 | 2700 | 3600 | 3600 |
FRS700 | 11050 | 5525 | 790 | 1150 | FRSG700 | 11050 | 5525 | 1800 | 1800 |
FRS750 | 18700 | 9350 | 790 | 1150 | FRSG750 | 18700 | 9350 | 1800 | 1800 |
FRS775 | 17000 | 8500 | 750 | 1050 | FRSG775 | 17000 | 8500 | 1800 | 1800 |
FRS800 | 22200 | 11100 | 700 | 950 | FRSG800 | 22200 | 11100 | 1800 | 1800 |
FRS900 | 33600 | 16800 | 700 | 950 | FRSG900 | 33600 | 16800 | 1200 | 1200 |
FRS1000 | 55000 | 27500 | 630 | 800 | FRSG1000 | 55000 | 27500 | 1200 | 1200 |
Freewheel Size | Freewheel d1 inch | Coupling d2 inch | A inch | DBSE inch | E inch | L1 inch | L2 inch | Weight* lbs |
FR 300 CA | 0.750 | 1.750 | 4.560 | 3.500 | 7.688 | 2.500 | 1.688 | 15 |
FR 400 CA | 1.125 | 1.750 | 4.560 | 3.750 | 8.188 | 2.750 | 1.688 | 18 |
FR 500CA | 1.312 | 2.313 | 6.000 | 4.188 | 9.625 | 3.500 | 1.938 | 32 |
FR 550 CA | 1.625 | 2.875 | 7.000 | 5.000 | 10.688 | 3.250 | 2.438 | 46 |
FR 600 CA | 2.000 | 2.875 | 7.000 | 4.313 | 10.500 | 3.750 | 2.438 | 55 |
FR 650 CA | 2.500 | 3.750 | 8.375 | 5.125 | 10.688 | 3.500 | 3.031 | 91 |
FR 700 CA | 2.938 | 4.375 | 9.438 | 6.875 | 15.469 | 5.000 | 3.594 | 137 |
FR 750 CA | 3.438 | 5.000 | 11.000 | 8.750 | 18.938 | 6.000 | 4.188 | 235 |
FR 775 CA | 3.750 | 5.875 | 12.500 | 9.500 | 20.250 | 6.000 | 4.750 | 321 |
FR 800 CA | 4.500 | 5.875 | 12.500 | 7.688 | 18.438 | 6.000 | 4.750 | 343 |
FR 900 CA | 5.438 | 6.500 | 13.625 | 9.125 | 20.813 | 6.375 | 5.313 | 487 |
FR 1000 CA | 7.000 | 7.125 | 15.500 | 10.125 | 22.781 | 6.625 | 6.031 | 740 |
* Note Weights are based on Solid Coupling hubs. Weights will vary with required bores. ? Keyway dimensions upon request by customers.
Mounting
The customer attachment part is centered on the external diameter D and then bolted on to the face. The recommended tolerance of the shaft is + 0 / - 0.001 inch and the tolerance of the pilot diameter D of the attachment part is - 0 / + 0.002 inch.
Labyrinth Seals
Labyrinth seals are available to provide addi - tional protection for harsh environments.
Features
Complete Freewheels FRX and FRZ are sealed sprag freewheels with ball bearings and sprag
lift-off X or sprag lift-off Z. The freewheels FRX and FRZ are used as:
Backstops
Overrunning Clutches
Maximum torques up to 30 000 lb-ft.
Bores up to 5.438 inch. Standard bores in inch dimension are available from stock. Metric
bores on request.
Application example
Complete Freewheel FRX 600 as an overrunning clutch in the drive unit of a conveyor belt
system with additional creep drive. The free - wheel with shaft coupling is installed between the main motor and the creep drive. When the creep drive operates, the freewheel is in driving operation and drives the belt at low speed. During normal operation (freewheeling operation), the main motor drives and the inner ring overruns and the creep drive is automatically disengaged. With this high speed, sprag lift-off X is used; the sprags work in freewheeling operation without contact and are wear-free.
Freewheel Size | Maximum torque mm lb-ft | Nominal torque mn lb-ft | Sprag lift-off at inner ring speed rpm | Max Speed | Freewheel Size | Maximum torque mm lb-ft | Nominal torque mn lb-ft | Sprag lift-off at inner ring speed rpm | Max Speed |
Inner ring freewheels/overruns rpm | Outer ring drives rpm | Inner ring freewheels/overruns rpm | Outer ring freewheels/overruns rpm |
FRX400 | 250 | 125 | 860 | 4000 | 340 | FRZ400 | 560 | 280 | 800 | 2600 | 320 |
FRX500 | 850 | 425 | 750 | 4000 | 300 | FRZ500 | 1070 | 535 | 1400 | 2050 | 560 |
FRX550 | 1500 | 750 | 700 | 4000 | 280 | FRZ550 | 2760 | 1380 | 1500 | 1800 | 620 |
FRX600 | 2000 | 1000 | 670 | 4000 | 265 | FRZ600 | 3530 | 1765 | 1450 | 1650 | 580 |
FRX650 | 3500 | 1750 | 610 | 4000 | 240 | FRZ650 | 5000 | 2500 | 1300 | 1400 | 520 |
FRX700 | 8100 | 4050 | 350 | 3600 | 140 | FRZ700 | 10500 | 5250 | 1160 | 1200 | 465 |
FRX750 | 14600 | 7300 | 320 | 2400 | 125 | FRZ750 | 17500 | 8750 | 1160 | 1200 | 465 |
FRX775 | 14800 | 7400 | 320 | 2100 | 125 | FRZ775 | 15000 | 6500 | 950 | 1050 | 380 |
FRX800 | 29000 | 14500 | 250 | 1800 | 100 | FRZ800 | 17400 | 8700 | 880 | 975 | 350 |
FRX900 | 30000 | 1500 | 250 | 650 | 100 | FRZ900 | 26000 | 13000 | 720 | 925 | 288 |
Freewheel Size | Freewheel d1 inch | Coupling d2 inch | A inch | DBSE inch | E inch | L1 inch | L2 inch | Weight* lbs |
FR 400 CA | 1.125 | 1.750 | 4.560 | 3.750 | 8.188 | 2.750 | 1.688 | 18 |
FR 500CA | 1.312 | 2.313 | 6.000 | 4.188 | 9.625 | 3.500 | 1.938 | 32 |
FR 550 CA | 1.625 | 2.875 | 7.000 | 5.000 | 10.688 | 3.250 | 2.438 | 46 |
FR 600 CA | 2.000 | 2.875 | 7.000 | 4.313 | 10.500 | 3.750 | 2.438 | 55 |
FR 650 CA | 2.500 | 3.750 | 8.375 | 5.125 | 10.688 | 3.500 | 3.031 | 91 |
FR 700 CA | 2.938 | 4.375 | 9.438 | 6.875 | 15.469 | 5.000 | 3.594 | 137 |
FR 750 CA | 3.438 | 5.000 | 11.000 | 8.750 | 18.938 | 6.000 | 4.188 | 235 |
FR 775 CA | 3.750 | 5.875 | 12.500 | 9.500 | 20.250 | 6.000 | 4.750 | 321 |
FR 800 CA | 4.500 | 5.875 | 12.500 | 7.688 | 18.438 | 6.000 | 4.750 | 343 |
FR 900 CA | 5.438 | 6.500 | 13.625 | 9.125 | 20.813 | 6.375 | 5.313 | 487 |
* Note Weights are based on Solid Coupling hubs. Weights will vary with required bores. Keyway dimensions upon request by customers.
Mounting
The customer attachment part is centered on the external diameter D and then bolted on to the face. The recommended tolerance of the shaft is + 0 / - 0.001 inch and the tolerance of the pilot diameter D of the attachment part is - 0 / + 0.002 inch.
Labyrinth Seals
Labyrinth seals are available to provide addi - tional protection for harsh environments.
주소:
Changhong West Road 182, Wujin District, Changzhou, Jiangsu, China
사업 유형:
제조사/공장
사업 범위:
공업 설비와 부품, 야금광산물과 에너지, 자동차와 오토바이와 액세서리, 제조 가공 기계, 철물
경영시스템 인증:
ISO 9001
회사소개:
Changzhou Lisongtai Industrial Motion Technology Co., Ltd는 원웨이 클러치, 오버러닝 클러치, 니들 롤러 베어링과 같은 다양한 원웨이 베어링을 생산하는 데 특화된 제조업체입니다. 1,000가지 이상의 미터법 및 인치 시리즈 니들 베어링 지정을 한 방향으로 착각하는 2000개 이상의 표준 모델은 국내외 시장에서 오토바이, 전기 및 공기 구동식 공구, 프린터, 경공업, 기계, 건설기계, 자동차 트럭, 사무실 장비에 정기적으로 제조되고 널리 사용됩니다. 또한, 다양한 작업에 대한 고객의 요구 사항에 따라 특수 베어링도 제공됩니다. 우리는 한국, 이란, 터키, 불가리아, 루마니아, 러시아, 이탈리아, 노르웨이, 미국, 캐나다, 우리는
무엇입니까?
우리 공장은 경제개발 해안 도시-산업지구-우진 창저우 시(Jiangsu)에 있었습니다. 교통이 편리해서, 기차를 타고 상하이까지 1시간 정도 걸립니다.
주요 제품은 무엇입니까?
원웨이 베어링, 원웨이 클러치, 오버러닝 클러치, 백스톱, 캠 클러치, 니들 롤러 베어링, 지지 롤러 및 커브 베어링, 원통형 롤러 베어링 매트가 있는 스러스트 볼 베어링 우리는 많은 주식을 보유하고 있으며 비표준 제품, 고객의 도면 또는 샘플을 생산할 수 있는 주의 대상이 됩니다.
우리의 장점은 무엇입니까?
제품: 1999년, 엔지니어로서 우리의 상사는 큰 베어링 공장에서 일하면서 원웨이 클러치 베어링을 개발 및 설계하기 시작했습니다. 지금까지 BB 시리즈, MZ 시리즈, TFS 시리즈, NSS 시리즈 RSBW 시리즈 개발에 성공했는데, 이는 Janpan의 TSUBAKI 브랜드와 비교했을 때 높은 품질로 도달했음을 확인할 수 있습니다.
Stieber 클러치, GMN 클러치, Ringspann 클러치, Formsprag 클러치, NSK 클러치와 동등한 Quliaty ECT
GFR 시리즈, DC 시리즈, ASNU 시리즈, NFR 시리즈, GFK 시리즈, NF 시리즈, AE 시리즈, AA 시리즈 등, 고품질 도달 거리를 확인할 수 있는 것은 독일의 STIEBER 브랜드와 비교할 수 있습니다.
FE 시리즈, FP 시리즈, FND 시리즈, FKN 시리즈 원웨이 클러치 베어링은 독일 GMN 브랜드와 비교했을 때 높은 품질 수준에 도달했음을 확인할 수 있습니다.
고객에게 업계 최고의 서비스를 지속적으로 제공하기 위해 베어링 공급 및 설계의 최전선에 서서 새로운 베어링으로 개발을 계속하고자 하는 우리의 의도는 바로 이 때문입니다.
공장 장비: 이 회사는 가장 진보된 CNC 자동 생산 라인, 자동 조립 라인 및 다양한 테스트 장비를 보유하고 있습니다. 저희가 제조한 베어링은 모두 저소음, 저진동, 저마찰, 고정밀, 높은 밀봉, 높은 회전 속도 및 긴 수명
Quantity Control: 2011 ISO9001:2008 품질 관리 시스템 인증을 획득했고, 모든 제품은 여러 번 검사하기 전에 발송됩니다. 또한 필요한 경우 상세 도면과 서비스를 제공합니다.
응용 프로그램이 무엇입니까?
기계, 리듀서, 호이스트, 엘리베이터, 자동차, 가전제품, 직물기계, 인쇄기계, 식품기계, 광산 기계 등
우리 제품이 판매된 곳은?
전 세계 우리의 제품은
독일, 영국, 네덜란드, 스페인, 이탈리아,
인도, 인도네시아, 필리핀, 태국,
이란,
멕시코의 두바이,
미국의
"품질 및 서비스"는 우리가 실제로 실천한 당신의 주요 관심사가 되어야 합니다. 우리의 제품 카테고리를 찾아보고 귀하의 문의사항을 알려주십시오. 우리의 목표는 고객에게 양질의 서비스를 제공하고 경쟁력 있는 가격을 제공하는 것입니다. 적절한 공급, 큰 재고, 편리한 교통편을 갖춘 우리는 새로운 고객이 우리를 방문해서 따뜻하게 환영한다.