기본 정보
사양
QTY: 12PCS CTN Size: 47.00X38.00X32.00 CM NW: 8.65
제품 설명
Features:
Tact switch
5 Video sources to any 3 connected TV's
Channel 3 or 4 switchable modulator
Optional Remote Control
Support IR control
30dB minimum port-to-port isolation
Built-in over-voltage protection
Internal component shielding for EMI/RFI noise isolation
12VDC output on " TV Ant In" for satellite antenna
12VDC operation ( DC Adapter not included )
LED indicator ( Red for Power & TVs, Yellow for Modulator )
18 months manufacturers warranty
Secification:
Input Port 4 Coaxial " F" and 1 composite RCA
Output Por 3 coaxial " F" and 1 composite RCA
Output Resolution 480P, 576P, 720P
Output channel CS=1:3ch &CS=0:4ch (American 61.25MHz &67.25MHz)
RF Frequency 5 - 1,000 Mhz
RF I/O impedance F jack connector 75 ohm unbalanced
Chassis Plastic Moded
Dimension 330(L) x 120(W) x 55(H)mm
Weight 464g
Power Supply DC 12V
Current consumption 21 mA typ/30 mA max.
Supply Voltage MOD: 12V ±0.2V 300mA operation 12V DC output on(TV ) port
Video input signal voltage Stator step 1.0Vp-p+/-1%, V/S: 7/3, APL=50%
Audio input signal voltage Sine wave of 1 KHz+/-5%: -5dBu(1.24Vp-p+/-2%).
Operating temperature range 25 +/-25 deg-C
Operating humidity less than 85%
Storage temperature range -20 ~ 70 deg-C
Storage humidity Less than 90%
Installation:
Connect all jacks labelded "FROM" to the sources: Satellite, CATV, Roof Antenna, VCR and DVD player.
Connect all jacks labelded "TO" to the TV/VIDEO location: TV1, TV2, VCR/TV3 and DVD output.
The front of the QS53E model contains 3 groups of selection switches. Each group represents a TV location in the RV labelded "TV1", "TV3" and "TV2". Whichever LED indicator is lit up, you will be watching on that TV location.
Hook up DVD plater or any device with Composite Video output using Composite Video Cable to the QS53E unit,
Composite Video out from QS53E to the TV1, TV2 and TV3 using the built in modulatro and send the signal on Channel
3 or 4.
Using Remote & IR TX/RX Kit
Switch sources or displays with the Remote ( not included in the package ), simply press the sources number on the
Remote in each TV group, then you are able to switch between source easily.
Connect to IR TX port with the IR blaster cable (not included in the package) for IR signal transmission. Place the IR blaster in direct line-of-sight of the equipment to be controlled.
Connect to the IR RX port with IR receiver cable (not included in the package) for IR signal reception. Make sure that the remote being used is in direct line-of-sight of the IR receiver, then you can control the source at the display end with the source remote.
주소:
Xinhe Street, Shajing, Shenzhen, Guangdong, China
사업 유형:
제조사/공장
사업 범위:
가전제품
회사소개:
Shenzhen Sonln Electronics Co., Ltd는 HDMI 장치, 보안 장치 및 기타 전자 제품 중 가장 큰 제조업체 중 하나입니다. 이 회사는 특히 전자 분야에서 강력한 엔지니어링 배경을 가진 전문 팀을 운영하고 있습니다. 주로 HDMI Matrix, HDMI 케이블, HDMI 스위치, HDMI Splitter, HDMI Extender, HDMI 컨버터, HD 네트워크 플레이어 등, 네트워크 스위치, LCD 조인트 PPU, SDI 신호 확장기, SDI 신호 대 HDMI 컨버터, 무선 네트워크 카드, 비디오 스플리터, DVI 매트릭스 등의 보안 장비 등, 일부 제품에 대한 특허권을 보유하고 있습니다. 또한 OEM과 ODM 모두 사용할 수 있는 맞춤형 제품을 설계합니다.
제품 개발부터 판매, 애프터 서비스에 이르기까지, 우리 회사는 국내 및 해외 고객에게 더 나은 서비스를 제공하기 위해 헌신하고 있습니다. 전문적이고 완벽한 디자인, 뛰어난 품질, 빠른 서비스, "고객 우선"의 서비스 정신이 있다면 신뢰할 만하고 장기적인 협력 파트너가 될 가치가 있습니다.