기본 정보
모델 번호.
Ferrite Microwave Oven Magnet
인증
RoHS 준수, CE, ISO9001, SGS, Ts16949
Ferrite Magnet
Ceramic Magnet
운송 패키지
Paper Carton+Wood Case
사양
Ferrite Microwave Oven Magnet
제품 설명
Ferrite Magnet for Microwave Oven:
Specification of Ferrite Microwave Oven Magnet :
Ferrite or ceramic magnets are still the most widely used magnets with a maximum energy product of 1 to ± 4.3 MGOe.
Due to the environmental requirements which are becoming more stringent barium ferrite has been replaced bystrontium ferrite during the last years.
Ferrite is the cheapest magnetic material and has a high corrosion resistance making coating unnecessary.
This magnetic material is hard and fragile and must be processed with diamond, preferably when it is not in a magnetic state.
Because it might shrink during the sinter process a tolerance of ± 2 % should be taken into account when determining the dimensions. If grinded ± 0.1 mm.
Tighter tolerance is available on request.
Ferrite magnets can be supplied both isotropically and anisotropically, they are used in the most divergent products such as loudspeakers, magnetrons, measuring devices, toys, engines, reed contacts etc.
The maximum temperature of use is 225°C depending on the specification, dimensions and system design.
For specifications: See the table below.
The minimum dimension for block magnets is 2 x 2 x 2 mm, whereas the maximum dimension for this type is 270 x 90 x 25.4 mm.
The minimum dimension for disc magnets is D 2 x 1 mm, whereas the maximum dimension for this type is D 156 x 25.
The minimum dimension for ring magnets is D8 x 2.5 x 3 mm, whereas the maximum dimension for this type is D 256 x D* x 25 mm (* inside diameter in consultation).
Follow size we have mold:
P/N | OD | ID | H |
---|
601 | 55+2.5 | 21.5+0.7-0.5 | 11 |
602 | 55+2.5 | 21.5+0.7-0.5 | 13 |
603 | 55+3 | 21+1.2 | 12.2 |
604 | 58+1.5-0.5 | 21.5+0.7-0.5 | 11 |
605 | 58+1.5-0.5 | 21.5+0.7-0.5 | 13 |
606 | 55.5+2.2-2 | 21.6±0.5 | 12.6 |
607 | 50 | 19.4 | 12.2 |
608 | 57+2 | 21.5+0.7-0.5 | 11.1 |
609 | 60.5±1.5 | 21.5+0.7-0.5 | 11.1 |
611 | 55 | 21 | 10.2 |
614A | 57 | 21.5 | 13.1 |
614 | 56.8±1.2 | 21.8±0.3 | 13±0.1 |
P/N | OD | ID | H |
---|
615 | 60.5 | 21+1.2 | 12.2 |
616 | 55.5+2.5-2 | 18.2+0.6 | 13.6 |
617 | 55+3 | 21+1.2 | 12.4 |
619 | 61.5±1.5 | 19.8±0.4 | 12.2 |
620 | 56.8 | 21.8 | 11 |
621 | 50 | 19.6 | 12.4 |
622 | 60.5 | 21.5 | 13.1 |
623 | 55 | 21.5 | 13.1 |
624 | 85 | 32 | 12 |
625 | 55.5+2.5-2 | 18.2+0.6 | 12 |
626 | 50+3 | 21.7±0.5 | 10.5+0.3-0.2 |
627 | 50+3 | 21.7±0.5 | 11.5+0.3-0.2 |
P/N | OD | ID | H |
---|
628 | 56.5+2 | 21.7±0.5 | 11.5 |
629 | 61 | 21.5 | 13.1 |
630 | 50+3 | 19.4+0.8 | 12.6 |
631 | 50 | 19.4 | 12.4 |
632 | 61.5 | 19.8 | 12.4 |
633 | 63±1 | 21.8±0.4 | 13.5±0.05 |
638 | 50 | 18.2 | 12 |
Chinese Standard |
Material | Br | Hcb | Hcj | (BH)max |
mT | KGs | KA/m | KOe | KA/m | KOe | KJ/m3 | MGOe |
Y10T | 200~235 | 2.0~2.35 | 125~160 | 1.57~2.01 | 210~280 | 2.64~3.52 | 6.5~9.5 | 0.8~1.2 |
Y20 | 320~380 | 3.2~3.8 | 135~190 | 1.70~2.38 | 140~195 | 1.76~2.45 | 18.0~22.0 | 2.3~2.8 |
Y22H | 310~360 | 3.1~3.6 | 220~250 | 2.77~3.14 | 280~320 | 3.52~4.02 | 20.0~24.0 | 2.5~3.0 |
Y23 | 320~370 | 3.2~3.7 | 170~190 | 2.14~2.38 | 190~230 | 2.39~2.89 | 20.0~25.5 | 2.5~3.2 |
Y25 | 360~380 | 3.6~4.0 | 135~170 | 1.70~2.14 | 140~200 | 1.76~2.51 | 22.5~28.0 | 2.8~3.5 |
Y26H | 360~390 | 3.6~3.9 | 220~250 | 2.77~3.14 | 225~255 | 2.83~3.21 | 23.0~28.0 | 2.9~3.5 |
Y27H | 370~400 | 3.7~4.0 | 205~250 | 2.58~3.14 | 210~255 | 2.64~3.21 | 25.0~29.0 | 3.1~3.7 |
Y30 | 370~400 | 3.7~4.0 | 175~210 | 2.20~2.64 | 180~220 | 2.26~2.77 | 26.0~30.0 | 3.3~3.8 |
Y30BH | 380~390 | 3.8~3.90 | 223~235 | 2.80~2.95 | 231~245 | 2.90~3.08 | 27.0~30.0 | 3.4~3.7 |
Y30-1 | 380~400 | 3.8~4.0 | 230~275 | 2.89~3.46 | 235~290 | 2.95~3.65 | 27.0~32.0 | 3.4~4.0 |
Y30H-2 | 395~415 | 3.95~4.15 | 275~300 | 3.46~3.77 | 310~335 | 3.90~4.21 | 28.5~32.5 | 3.5~4.0 |
Y32 | 400~420 | 4.0~4.2 | 160~190 | 2.01~2.38 | 165~195 | 2.07~2.45 | 30.0~33.5 | 3.8~4.2 |
Y33 | 410~430 | 4.1~4.3 | 220~250 | 2.77~3.14 | 225~255 | 2.83~3.21 | 31.5~35.0 | 4.0~4.4 |
Y35 | 400~410 | 4.00~4.10 | 175~195 | 2.20~2.45 | 180~200 | 2.26~2.51 | 30.0~32.0 | 3.8~4.0 |
USA Standard |
Material | Br | Hcb | Hcj | (BH)max |
mT | KGs | KA/m | KOe | KA/m | KOe | KJ/m3 | MGOe |
C1 | 230 | 2.3 | 148 | 1.86 | 258 | 3.5 | 8.36 | 1.05 |
C5 | 380 | 3.8 | 191 | 2.4 | 199 | 2.5 | 27 | 3.4 |
C7 | 340 | 3.4 | 258 | 3.23 | 318 | 4.00 | 21.9 | 2.75 |
C8(=C8A) | 385 | 3.85 | 235 | 2.95 | 242 | 3.05 | 27.8 | 3.5 |
C8B | 420 | 4.2 | 232 | 2.913 | 236 | 2.96 | 32.8 | 4.12 |
C9 | 380 | 3.8 | 280 | 3.516 | 320 | 4.01 | 26.4 | 3.32 |
C10 | 400 | 4.0 | 288 | 3.617 | 280 | 3.51 | 30.4 | 3.82 |
C11 | 430 | 4.3 | 200 | 2.512 | 204 | 2.56 | 34.4 | 4.32 |
Europe Standard The standard from International Electronics Committee (IEC404-8-1) O×100=Y10T=C1 ×300=Y30=C5 O×330=Y30 BH |
Grade | Allowed Value (min-typical) |
Br | Hcb | BrHcj | (BH)max |
mT | KGs | KA/m | KOe | KA/m | KOe | KJ/m3 | MGOe |
HF8/22 | 200-220 | 2.00-2.20 | 125-140 | 1.57-1.76 | 220-230 | 2.76-2.89 | 6.5-6.8 | 0.8-1.1 |
HF20/19 | 320-333 | 3.20-3.33 | 170-190 | 2.14-2.39 | 190-200 | 2.39-2.51 | 20.0-21.0 | 2.5-2.7 |
HF20/28 | 310-325 | 3.10-3.25 | 220-230 | 2.76-2.89 | 280-290 | 3.52-3.64 | 20.0-21.0 | 2.5-2.7 |
HF22/30 | 350-365 | 3.50-3.65 | 255-265 | 3.20-3.33 | 290-300 | 3.64-3.77 | 22.0-23.5 | 2.8-3.0 |
HF24/16 | 350-365 | 3.50-3.65 | 155-175 | 1.95-2.20 | 160-180 | 2.01-2.26 | 24.0-25.5 | 3.0-3.2 |
HF24/23 | 350-365 | 3.50-3.65 | 220-230 | 2.76-2.89 | 230-240 | 2.89-3.01 | 24.0-25.5 | 3.0-3.2 |
HF24/35 | 360-370 | 3.60-3.70 | 260-270 | 3.27-3.39 | 350-360 | 4.40-4.52 | 24.0-25.5 | 3.0-3.2 |
HF26/16 | 370-380 | 3.70-3.80 | 155-175 | 1.95-2.20 | 160-180 | 2.01-2.26 | 26.0-27.0 | 3.2-3.4 |
HF26/18 | 370-380 | 3.70-3.80 | 175-190 | 2.20-2.39 | 180-190 | 2.26-2.39 | 26.0-27.0 | 3.3-3.4 |
HF26/24 | 370-380 | 3.70-3.80 | 230-240 | 2.89-3.01 | 240-250 | 3.01-3.14 | 26.0-27.0 | 3.3-3.4 |
HF26/26 | 370-380 | 3.70-3.80 | 230-240 | 2.89-3.01 | 260-270 | 3.27-3.39 | 26.0-27.0 | 3.3-3.4 |
HF26/30 | 385-395 | 3.85-3.95 | 260-270 | 3.27-3.39 | 300-310 | 3.77-3.89 | 26.0-27.0 | 3.3-3.4 |
HF28/26 | 385-395 | 3.85-3.95 | 250-265 | 3.14-3.33 | 260-275 | 3.27-3.45 | 28.0-30.0 | 3.5-3.8 |
HF28/28 | 385-395 | 3.85-3.95 | 260-270 | 3.27-3.39 | 280-290 | 3.50-3.60 | 28.0-30.0 | 3.5-3.8 |
HF30/26 | 395-405 | 3.95-4.05 | 250-260 | 3.14-3.33 | 260-270 | 3.27-3.39 | 30.0-31.5 | 3.8-3.9 |
HF32/17 | 410-420 | 4.10-4.20 | 160-180 | 2.01-2.26 | 165-175 | 2.07-2.20 | 32.0-33.0 | 4.0-4.1 |
HF32/22 | 410-420 | 4.10-4.20 | 215-225 | 2.70-2.83 | 220-230 | 2.76-2.89 | 32.0-33.0 | 4.0-4.1 |
HF32/25 | 410-420 | 4.10-4.20 | 240-250 | 3.01-3.14 | 250-260 | 3.14-3.27 | 32.0-33.0 | 4.0-4.1 |
주소:
Rm. 813-14, Liuting Star Bldg., No. 22, Lane 299, Cangsong Road, Ningbo, Zhejiang, China
사업 유형:
제조사/공장, 무역 회사
사업 범위:
야금광산물과 에너지
경영시스템 인증:
ISO 9001, IATF16949
회사소개:
닌보 린리 마그넷 주식회사, Ltd.는 1990년에 설립된 자장 성 닝보 시티의 산업 개발 지역에 위치해 있습니다. 동쪽의 비룬 항구와 가깝고, 남쪽으로는 리쉬 공항 닝보와 가깝습니다. 이곳에 오시는 것이 매우 편리합니다.
2005년 ISO9001 인증을 획득했으며 "저장성 기술 기업"의 품질 인증을 받았습니다. 2013년 ISO/TS16949, ISO14001 관리 시스템에 의해 인증을 받았습니다.
당사는 고무 자석, 소결 NdFeB 자석, 접합 NdFeB, 사출 페라이트 마그넷을 비롯한 모든 종류의 영구 자석을 제조하는 잘 알려져 있는 제조업체이자 공급업체입니다. 하드 페라이트 자석, AlNiCo, SmCo, 자석 어셈블리
고무 자석 사업부는 1250mm 너비의 고무 자석을 생산할 수 있습니다. 전기 모터 스트립은 좋은 품질로 잘 알려져 있습니다. 생산 용량은 연간 10,000t입니다. 모든 제품은 EU Directive 2002/95/EC RoHS 및 후속 수정 지침 2005/618/EC 및 장난감 표준 EN71-3을 준수합니다.
2002년에 본드 자석을 위한 워크샵을 투자했으며, 샤프트와 플라스틱 부품에 접합된 자석을 조립할 수 있습니다. 우리는 항상 자동 모터 부품 공장 및 센서 공장과 협력합니다. 당사의 정글에서는 사출 NdFeB, 사출 페라이트, 금형 NdFeB 압축, Bonded SmCo에 적합한 재료 제품을 선택할 수 있습니다. 200톤 사출 및 보세형 자석 용량을 갖추고 있습니다.
우리 회사의 가장 큰 부서는 자석을 박는 NdFeB입니다. N52, N50M, N48H, N45SH, N42UH 등 초고등급 N40EH, N33AH 등
. BAKER, CBK, GREE, GEELY 등과 같은 고객의 경우
, 당사의 자석은 엘리베이터 모터, 풍력 발전기, 서보 모터, 선형 모터, 하이브리드 전기차, 컴프레서 모터 등 자석은 기계, 오디오/비디오 및 통신 장비, 의료 기기, 사무 자동화, 자석 분리기 등에도 널리 사용됩니다
. 공장 방문을 환영합니다.