기본 정보
Power Supply
380V,50Hz(Optional)
Operation Training
Supply for Free
Buyer Inspection
Supply for Buyer Before Shipment
Machine Free Parts
Supply
제품 설명
Single stage vacuum transformer dielectric oil purifier device
Application
SVP series efficiency single stage vacuum transformers insulation oil purifier can quickly
and effectively remove water, gas, oxide materials, fee carbon and other impurities from
transformer oil to lower the PH value, improve breakdown voltage and quality. Also serving
as the vacuum oiling equipment and drying equipment, SVP vacuum transformer oil purifier
adopts high vacuum oil dehydrator and degasification system and duplex-Stereo film
evaporating technology for drying insulation oil and recover the dielectric strength. This
vacuum insulation oil purification machine can live line work on the spot and also can be
suitable to purify other insulating oils, such as capacitor oil, switch oil, mutual inductor oil,
cable oil, circuit breaker oil and so on.
Features
1. Horizontal vacuum separation technology, high efficient separation of vacuum degassing
exponentially increase evaporation area, increase the retention time of the oil keep in the
vacuum chamber, high efficient and reliable.
2. Radiant heating system, enhance the contact area of the oil and oil heater, reduce the
surface temperature of the heater, put an end to oil cracking aging.
3. Fault protection, Heater protection, prevent heater dry, pressure protection, discharge
fault alarm and motor alarm.
4. Vacuum pump front cooler, reduce the water into the vacuum pump, and reduce the
frequency of replace the vacuum pump oil, extend the life of the vacuum pump.
5. Patent holder degassing tank "foam protection structure + two-way foam electronic
monitoring system", to prevent vacuum pump oil injection.
6. Automatic oil floating ball and automatic oil level electronic control system, realize the
man-machine separation
7. Using high pressure oil pump, put oil in/out through machine stability, low noise, long
work life.
8. Stainless steel mesh filters, acid resistant and anti-corrosion, large filtration area,
strong suction sewage capacity, high working efficiency.
Technical specification
Model | SVP010 | SVP020 | SVP030 | SVP050 | SVP080 | SVP100 | SVP150 | SVP200 | SVP300 |
Capacity(L/min) | 10 | 20 | 30 | 50 | 80 | 100 | 150 | 200 | 300 |
Vacuum level | -0.06~-0.095 Mpa |
Working pressure | ≤ 0.4 Mpa |
Temperature range | 20 ~ 80ºC |
Filtering precision | ≤1 micron |
Continuous work | ≥200 hr |
No failure running | ≥5000 hr |
Power supply | 380V, 50HZ, 3PH ( or Customized ) |
Working noise | 65 dB |
Heating power (kw) | 15 | 15 | 24 | 30 | 48 | 60 | 90 | 108 | 130 |
Total power (kw) | 16.8 | 16.8 | 26 | 33 | 52 | 66 | 100 | 120 | 148 |
Inlet/outlet(mm) | 25 | 32 | 32 | 38 | 44 | 50 | 58 | 65 | 25 |
Weight (kg) | 240 | 250 | 280 | 320 | 600 | 750 | 900 | 1050 | 1150 |
Dimension (mm) | L | 1100 | 1130 | 1220 | 1300 | 1350 | 1420 | 1600 | 1650 | 1800 |
W | 760 | 800 | 820 | 900 | 1000 | 1000 | 1200 | 1250 | 1350 |
H | 1100 | 1220 | 1300 | 1310 | 1350 | 1750 | 1900 | 1920 | 2000 |
Index Of Purified Oil
Breakdown voltage | ≥ 60KV |
Water content | ≤ 5ppm |
Gas content | ≤ 0.1% |
Filtering particles | ≥ 99.5% |
Particles size | ≤ 1 micron |
Cleanness | ≤ Grade 6 (NAS) |
Processing index by regeneration device as following (customer's preference) |
Acid value | ≤ 0.03 mgKOH/g |
Water-solubility | ≥ 5.4 PH |
Flash point (close cup) | ≥ 135°C |
Dielectric- factor loss | tgδ (90ºC)% ≤ 0.005 |
Working principle
Because under high vacuum, the water boiling point within oil is much lower than normally,
there is not need any high temperature can volatilize a large number of moisture, the
higher vacuum, the lower water boiling point, the water evaporation faster. The same, when
reach higher temperature, moisture evaporation is faster, using this principle to heating
and making high vacuum can effectively remove the moisture within the oil, and through the
filter to remove impurities within the oil, to get the clean oil after our machine purification
work.
주소:
No. 94, North Road of College Town, Shapingpa District, Chongqing, China
사업 유형:
제조사/공장, 무역 회사
사업 범위:
공업 설비와 부품, 제조 가공 기계, 측정 기계
경영시스템 인증:
ISO 9001, ISO 14001, ISO 14000, ISO 29001
회사소개:
충칭 HLA Mechanical Equipment Co., Ltd는 중국의 전문 기계 제조업체입니다. HLA의 설립 이래로, 당사는 전 세계적으로 까다로운 응용 분야에 혁신적인 오일 정제 및 공기 건조 솔루션 및 서비스를 제공하는 데 전문화되어 있습니다. 당사의 제품 및 서비스는 오일 청정기, 공기 압축기, 상대 테스트 장비 등 다양한 범위의 제품을 포함합니다. HLA 제품 라인은 장비의 효율적인 성능을 보장하고, 생태학적 폐기 문제를 줄이며, 고객이 비용을 절약할 수 있도록 도와줍니다.
숙련된 엔지니어들에게 따라 완벽한 기술 지원, 고급 설계, 엄격한 품질 검사 라인, 빠르고 뛰어난 애프터 서비스. 현재 시장에서 가장 효과적이고 내구성이 뛰어나며 사용자 친화적인 장비를 설계하고 구축하기 위해 최선을 다하고 있습니다.
HLA는 변전소, 강철 구조, 금속 공학, 자동차, 철도 등의 프로젝트에서 널리 사용되고 있습니다. 마린, 광산, 항공, 의료, 화학, 석유 등 성능 및 보호 정책을 통해 유지보수 비용을 절감하고, 장비 수명을 연장하며, 장비를 최고의 효율로 작동하고, 가동 중지 시간을 방지하고, 오늘날의 생태학적 요구 사항을 충족합니다.